Uploaded April 2020 | Updated September 2026, 56 minutes ago
It's springtime and ready to plant a garden. I just needed a place to plant my vegetables, so I built a raised garden bed. I forgot to mention in the video, but all of the wood I used is cedar.
My Instructables Link (printable instructions):
➞ instructables.com/id/Build-a-Raised-Garden-Bed
My Second Channel:
➞ youtube.com/HDYDIY
▽▽ ▽▽
If you would like to help support this channel, check out my Amazon affiliate links below. I earn a small commission for anything you buy after clicking them, and you don't pay any more than you normally would.
▽▽ ▽▽
My Amazon Storefront
➞ amazon.com/shop/howdoyoudiy
Just For Fun
➞ amzn.to/3RBtLIn
-----
▽ Here is what I used:
Safety Equipment
-----
Safety Glasses (amzn.to/39N7fDt)
Ear Plugs (amzn.to/2XcMxKD)
Dust Mask (amzn.to/34oPHwt)
Tools
-----
Tape Measure (amzn.to/2V3UoYa)
Pencil (amzn.to/2Tu9O63)
Square (amzn.to/2B64ajg)
Circular Saw (amzn.to/3dXtlWW)
Impact Driver (amzn.to/2xUydeR)
Bit for the Screws (it came with the screws)
Parts
-----
Cedar Boards for Part 1:
7 - 1x8 (3/4" x 7 1/4")
4 - 2x4 (1 1/2" x 3 1/2")
Cedar Boards for Part 2:
2 - 2x4 (1 1/2" x 3 1/2")
4 - 1x4 (3/4" x 3 1/2")
18 - 1x2 (3/4" x 1 1/2")
Deck Screws:
1 Lb. 2" (amzn.to/3eoH2P8)
1 Lb. 1 1/4" (amzn.to/2y6Dh04)
-----
▽ Follow Me:
➞ Twitter - twitter.com/HowDoYouDIY
➞ Facebook - facebook.com/HowDoYouDIY
➞ Instagram - instagram.com/howdoyou.diy
➞ YouTube Second Channel - youtube.com/HDYDIY
-----
▽ If You Would Like To Support Me: (optional)
➞ buymeacoffee.com/HowDoYouDIY
➞ Or click the "Thanks" button below the video
-----
▽ Music:
Track: Diviners - Stockholm Lights [NCS Release]
Music provided by NoCopyrightSounds.
Watch: youtu.be/_Bs2dUtjDSI
Free Download / Stream: ncs.io/StockholmLights
Warriyo - Mortals (feat. Laura Brehm) [NCS Release]
➞ youtu.be/yJg-Y5byMMw
-----
▽ Follow Warriyo:
➞ SoundCloud - soundcloud.com/warriyo
➞ Facebook - facebook.com/WarriyoMusic
➞ Twitter - twitter.com/warriyo
➞ YouTube - youtube.com/WarriyoMusic
▽ Follow Laura Brehm:
➞ SoundCloud - soundcloud.com/laurabrehm
➞ Facebook - facebook.com/laurabrehmmusic
➞ Twitter - twitter.com/laurakbrehm
➞ YouTube - youtube.com/user/laurabrehm
-----
#RaisedGardenBed #RaisedGarden #GardenBed
It's springtime and ready to plant a garden. I just needed a place to plant my vegetables, so I built a raised garden bed. I forgot to mention in the video, but all of the wood I used is cedar.
My Instructables Link (printable instructions):
➞ instructables.com/id/Build-a-Raised-Garden-Bed
My Second Channel:
➞ youtube.com/HDYDIY
▽▽ ▽▽
If you would like to help support this channel, check out my Amazon affiliate links below. I earn a small commission for anything you buy after clicking them, and you don't pay any more than you normally would.
▽▽ ▽▽
My Amazon Storefront
➞ amazon.com/shop/howdoyoudiy
Just For Fun
➞ amzn.to/3RBtLIn
-----
▽ Here is what I used:
Safety Equipment
-----
Safety Glasses (amzn.to/39N7fDt)
Ear Plugs (amzn.to/2XcMxKD)
Dust Mask (amzn.to/34oPHwt)
Tools
-----
Tape Measure (amzn.to/2V3UoYa)
Pencil (amzn.to/2Tu9O63)
Square (amzn.to/2B64ajg)
Circular Saw (amzn.to/3dXtlWW)
Impact Driver (amzn.to/2xUydeR)
Bit for the Screws (it came with the screws)
Parts
-----
Cedar Boards for Part 1:
7 - 1x8 (3/4" x 7 1/4")
4 - 2x4 (1 1/2" x 3 1/2")
Cedar Boards for Part 2:
2 - 2x4 (1 1/2" x 3 1/2")
4 - 1x4 (3/4" x 3 1/2")
18 - 1x2 (3/4" x 1 1/2")
Deck Screws:
1 Lb. 2" (amzn.to/3eoH2P8)
1 Lb. 1 1/4" (amzn.to/2y6Dh04)
-----
▽ Follow Me:
➞ Twitter - twitter.com/HowDoYouDIY
➞ Facebook - facebook.com/HowDoYouDIY
➞ Instagram - instagram.com/howdoyou.diy
➞ YouTube Second Channel - youtube.com/HDYDIY
-----
▽ If You Would Like To Support Me: (optional)
➞ buymeacoffee.com/HowDoYouDIY
➞ Or click the "Thanks" button below the video
-----
▽ Music:
Track: Diviners - Stockholm Lights [NCS Release]
Music provided by NoCopyrightSounds.
Watch: youtu.be/_Bs2dUtjDSI
Free Download / Stream: ncs.io/StockholmLights
Warriyo - Mortals (feat. Laura Brehm) [NCS Release]
➞ youtu.be/yJg-Y5byMMw
-----
▽ Follow Warriyo:
➞ SoundCloud - soundcloud.com/warriyo
➞ Facebook - facebook.com/WarriyoMusic
➞ Twitter - twitter.com/warriyo
➞ YouTube - youtube.com/WarriyoMusic
▽ Follow Laura Brehm:
➞ SoundCloud - soundcloud.com/laurabrehm
➞ Facebook - facebook.com/laurabrehmmusic
➞ Twitter - twitter.com/laurakbrehm
➞ YouTube - youtube.com/user/laurabrehm
-----
#RaisedGardenBed #RaisedGarden #GardenBed
![Make a TARDIS Model - Part 2 - The Sides
Ive built a 1/10th scale model of the TARDIS. This is the second video of the series, and this time Im building 3 of the sides of the TARDIS. Dont forget to subscribe so that youll get updates on the follow-up videos!
My Instructables Link:
➞ https://www.instructables.com/id/Make-a-TARDIS-Model
My Second Channel:
➞ https://www.youtube.com/hdydiy
▽▽ ▽▽
If you would like to help support this channel, check out my Amazon affiliate links below. I earn a small commission for anything you buy after clicking them, and you dont pay any more than you normally would.
▽▽ ▽▽
My Amazon Storefront
➞ https://www.amazon.com/shop/howdoyoudiy/
Just For Fun
➞ https://amzn.to/3RBtLIn
▽ Here is what I used:
Tools
Utility Knife (https://amzn.to/2TvjpcK)
Ruler (https://amzn.to/2GmKE5m)
Pencil (https://amzn.to/2Tu9O63)
Wood Glue (https://amzn.to/2vxzR2n)
1 Spring Clamps (https://amzn.to/2GijPAf)
2 Spring Clamps (https://amzn.to/2MVxttC)
Parts
Plywood Sheet - 3/16 (5 mm) Thickness
(or something close, some measurements
will need to be adjusted)
▽ Follow Me:
➞ Twitter - https://www.twitter.com/HowDoYouDIY
➞ Facebook - https://www.facebook.com/HowDoYouDIY
➞ Instagram - https://www.instagram.com/howdoyou.diy
➞ YouTube Second Channel - https://www.youtube.com/HDYDIY
▽ If You Would Like To Support Me: (optional)
➞ https://www.buymeacoffee.com/HowDoYouDIY
➞ Or click the Thanks button below the video
▽ Music:
Lost Sky - Dreams [NCS Release]
➞ https://youtu.be/SHFTHDncw0g
Lost Sky - Dreams pt.II (feat. Sara Skinner) [NCS Release]
➞ https://youtu.be/L7kF4MXXCoA
▽ Follow Lost Sky:
➞ Facebook - http://facebook.com/lostskydiary
➞ SoundCloud - http://soundcloud.com/lostskydiary
➞ Instagram - http://instagram.com/lostskydiary
▽ Follow Sara Skinner:
➞ SoundCloud - http://soundcloud.com/saraskinner
➞ Facebook - http://facebook.com/saraskinnermusic
➞ Twitter - http://twitter.com/hisaraskinner Make a TARDIS Model - Part 2 - The Sides](https://i.ytimg.com/vi/R-eaKlxDcbg/mqdefault.jpg)


![Make a Colorful Infinity Mirror
Instead of making an infinity mirror with white LEDs, this one is using addressable RGB LEDs.
Link to my last video:
➞ https://youtu.be/tkZN4qPhjJ4
My Instructables Link:
➞ https://www.instructables.com/id/Make-a-Colorful-Infinity-Mirror
My Second Channel:
➞ https://www.youtube.com/hdydiy
▽▽ ▽▽
If you would like to help support this channel, check out my Amazon affiliate links below. I earn a small commission for anything you buy after clicking them, and you dont pay any more than you normally would.
▽▽ ▽▽
My Amazon Storefront
➞ https://www.amazon.com/shop/howdoyoudiy/
Just For Fun
➞ https://amzn.to/3RBtLIn
▽ Here is what I used:
Tools
Jig Saw (https://amzn.to/2M0q8vH)
Jig Saw Blade (https://amzn.to/2KF4OWJ)
Drill (https://amzn.to/2LWBoJr)
1/4 Brad Point Drill Bit (https://amzn.to/2OmRMiS)
3/16 Drill Bit (https://amzn.to/2OngmQN)
Tiny Drill Bit ()
Tiny Screws ()
Fender Washers ()
Speed Square (https://amzn.to/2B64ajg)
Wood Glue (https://amzn.to/2vxzR2n)
Wood Filler (https://amzn.to/2EjGXvY)
Soldering Iron (http://amzn.to/2yPdAwS)
-or- (https://amzn.to/2oK9Xrh)
Lead-Free Solder (https://amzn.to/2GD3asQ)
Lead-Based Solder (https://amzn.to/3BGyXFQ)
Hot Glue Gun (https://amzn.to/2l5XOYZ)
Hot Glue Sticks (https://amzn.to/2wM0Ur0)
Parts
1/2 x 3/4 Board (for the frame)
Addressable RGB Led Strip (https://amzn.to/2wM23yO)
Connector Plugs (https://amzn.to/2wICn6r)
Addressable RGB LED Controller #1 (https://amzn.to/2wICsHh)
Addressable RGB LED Controller #2 (https://amzn.to/2PEaEux)
5vdc Power Supply (https://amzn.to/2Q61IPx)
Plexiglass (https://amzn.to/2vxB09Q)
One Way Mirror Window Tint, Silver (https://amzn.to/2RVV53t)
-or- (https://amzn.to/35YX5yi)
▽ Follow Me:
➞ Twitter - https://www.twitter.com/HowDoYouDIY
➞ Facebook - https://www.facebook.com/HowDoYouDIY
➞ Instagram - https://www.instagram.com/howdoyou.diy
➞ YouTube Second Channel - https://www.youtube.com/HDYDIY
▽ If You Would Like To Support Me: (optional)
➞ https://www.buymeacoffee.com/HowDoYouDIY
➞ Or click the Thanks button below the video
▽ Music:
Tobu - Candyland [NCS Release]
➞ https://youtu.be/IIrCDAV3EgI
LarsM - Lovers [NCS Release]
➞ https://youtu.be/q5mdZxtko0A
Unison - Aperture [NCS Release]
➞ https://youtu.be/8VDjPYcL-oU
▽ Follow Tobu:
➞ SoundCloud - https://soundcloud.com/7obu
➞ Facebook - https://www.facebook.com/tobuofficial
➞ Twitter - http://www.twitter.com/tobuofficial
➞ Spotify - http://smarturl.it/Tobu_Spotify
▽ Follow LarsM:
➞ Facebook - https://www.facebook.com/LarsMOfficial
➞ SoundCloud - https://soundcloud.com/larsmofficial
➞ Twitter - https://twitter.com/larsmofficial
▽ Follow Unison:
➞ SoundCloud - https://soundcloud.com/unisonn
➞ Facebook - https://www.facebook.com/Unison-574331492578840/
➞ Twitter - https://twitter.com/ItsUnison
#InfinityMirror Make a Colorful Infinity Mirror](https://i.ytimg.com/vi/T-jcIiV6ovI/mqdefault.jpg)

![Remove Labels From Glass Bottles - Experiment
There are many ways to remove labels from glass bottles, here are some that I tried. I forgot to mention in the video, but the vinegar I used was 5% acidity.
My Instructables Link:
➞ https://www.instructables.com/id/Remove-Labels-From-Glass-Bottles-Experiment
My Second Channel:
➞ https://www.youtube.com/hdydiy
▽▽ ▽▽
If you would like to help support this channel, check out my Amazon affiliate links below. I earn a small commission for anything you buy after clicking them, and you dont pay any more than you normally would.
▽▽ ▽▽
My Amazon Storefront
➞ https://www.amazon.com/shop/howdoyoudiy/
Just For Fun
➞ https://amzn.to/3RBtLIn
▽ Here is what I used:
A bottle with a label
Water
Dish Soap (http://amzn.to/2CtufLf)
Acetone (https://amzn.to/2PY0jhZ)
Apple Cider Vinegar (http://amzn.to/2zWFp5F)
Distilled White Vinegar (http://amzn.to/2zVrqgC)
Paper Towels (http://amzn.to/2CxLUPa)
Sealable Plastic Bags (http://amzn.to/2Esw9d2)
▽ Follow Me:
➞ Twitter - https://www.twitter.com/HowDoYouDIY
➞ Facebook - https://www.facebook.com/HowDoYouDIY
➞ Instagram - https://www.instagram.com/howdoyou.diy
➞ YouTube Second Channel - https://www.youtube.com/HDYDIY
▽ If You Would Like To Support Me: (optional)
➞ https://www.buymeacoffee.com/HowDoYouDIY
➞ Or click the Thanks button below the video
▽ Music:
Different Heaven & EH!DE - My Heart [NCS Release]
➞ https://youtu.be/jK2aIUmmdP4
▽ Follow Different Heaven:
➞ SoundCloud - http://soundcloud.com/different-heaven
➞ Facebook - https://www.facebook.com/DifferentHeaven
➞ YouTube - https://www.youtube.com/user/Differentheaven
➞ Twitter - https://twitter.com/DifferentHeaven
▽ Follow EH!DE:
➞ SoundCloud - https://soundcloud.com/ehide-dubstep
➞ Facebook - https://www.facebook.com/pages/Ehide/299284223530947
➞ Twitter - https://twitter.com/EhideOfficial
➞ YouTube - http://www.youtube.com/user/TheOfficialEhide
➞ Songkick - http://www.songkick.com/artists/7395524
▽ Music:
Distrion & Alex Skrindo - Entropy [NCS Release]
➞ https://youtu.be/iaKgF1Vf5bQ
▽ Follow Distrion:
➞ SoundCloud - https://soundcloud.com/distrion
➞ Facebook - https://www.facebook.com/distrionmusic
➞ Twitter - https://twitter.com/Distrionoficial
▽ Follow Alex Skrindo:
➞ SoundCloud - https://soundcloud.com/alex-skrindo
➞ Facebook - https://www.facebook.com/AlexanderSkr...
➞ Twitter - https://twitter.com/AlexSkrindo Remove Labels From Glass Bottles - Experiment](https://i.ytimg.com/vi/V5ObBIR-69w/mqdefault.jpg)
![Required Tools and Supplies For Basic Soldering | Soldering Basics | Soldering for Beginners
This is the first video for a 3 part sub-series that Im adding to my Soldering Basics video series. This sub-series is about Tools and Supplies for Basic Soldering. This soldering series is a great way to learn soldering for beginners. In this video Im showing whats required for basic soldering, and it should help you with setting up a good soldering kit for beginners.
If you would like text instructions, check out my Instructables Link:
➞ https://www.instructables.com/Required-Tools-for-Basic-Soldering/
Tools and Supplies for Basic Soldering Playlist:
➞ https://youtube.com/playlist?list=PLCZv3eVnjjDJJqXvPgdSEpLdL40EAH7A3
My Soldering Basics Playlist:
➞ https://youtube.com/playlist?list=PLCZv3eVnjjDKo0G9AIOA48qtfylxDc9d9
My Second YouTube Channel:
➞ https://www.youtube.com/HDYDIY
▽▽ ▽▽
If you would like to help support this channel, check out my Amazon affiliate links below. I earn a small commission for anything you buy after clicking them, and you dont pay any more than you normally would.
▽▽ ▽▽
My Amazon Storefront
➞ https://www.amazon.com/shop/howdoyoudiy/
Just For Fun
➞ https://amzn.to/3RBtLIn
▽ Here are some options:
Soldering Irons
Basic Soldering Iron (https://amzn.to/3YJRojI)
Basic Soldering Kit (https://amzn.to/3VroIJb)
Soldering Station (https://amzn.to/3WnLYcn)
Solder
Rosin Core Solder (https://amzn.to/3FRmg9o)
Lead Free Rosin Core Solder (https://amzn.to/3PPXVFq)
Lead Based Rosin Core Solder (https://amzn.to/3BGyXFQ)
Flux
Flux Paste (https://amzn.to/3YMZms9)
Flux Gel (https://amzn.to/3C0hPYG)
Flux Liquid (https://amzn.to/3YEhQeq)
Flux Pen (https://amzn.to/3YJoCzE)
No-Clean Flux Pen (https://amzn.to/3jup3gX)
▽ Follow Me:
➞ Twitter - https://www.twitter.com/HowDoYouDIY
➞ Facebook - https://www.facebook.com/HowDoYouDIY
➞ Instagram - https://www.instagram.com/howdoyou.diy
➞ YouTube Second Channel - https://www.youtube.com/HDYDIY
▽ If You Would Like To Support Me: (optional)
➞ https://www.buymeacoffee.com/HowDoYouDIY
➞ Or click the Thanks button below the video
▽ Music:
Phantom Sage - Our Lives Past (feat. Emily Styles) [NCS Release]
➞ https://youtu.be/5-vMcPR7Bws
▽ Follow Phantom Sage:
➞ Facebook - https://www.facebook.com/thefantomofficial
➞ YouTube - http://www.youtube.com/phantomsage
➞ SoundCloud - https://soundcloud.com/phantomsage
➞ Twitter - https://twitter.com/_phantomsage_
#SolderingBasics #BasicSolderingTools #BasicSolderingSupplies Required Tools and Supplies For Basic Soldering | Soldering Basics | Soldering for Beginners](https://i.ytimg.com/vi/Wbd0mhOfGRg/mqdefault.jpg)

![Make Gummy Jello Shots
Want a good snack for a party? Make some jello in gummy shot glasses!
My Instructables Link:
➞ https://www.instructables.com/id/Make-Gummy-Jello-Cups
My Second Channel:
➞ https://www.youtube.com/hdydiy
▽▽ ▽▽
If you would like to help support this channel, check out my Amazon affiliate links below. I earn a small commission for anything you buy after clicking them, and you dont pay any more than you normally would.
▽▽ ▽▽
My Amazon Storefront
➞ https://www.amazon.com/shop/howdoyoudiy/
Just For Fun
➞ https://amzn.to/3RBtLIn
▽ What you need:
3 - Packets of Unflavored Gelatin (http://amzn.to/2yfptze)
2 - Boxes of Jello, 3 oz/85 g (http://amzn.to/2yzAurh)
1 - Silicone Shot Glass Mold (http://amzn.to/2yfgL3Y)
▽ You will also need:
Cold Water
A Spoon (http://amzn.to/2xOkeFf)
A Pan to cook with (http://amzn.to/2x3wgvv)
▽ This is optional, but it can make things easier if you also have:
A Bowl (http://amzn.to/2xKUCY3)
A Plate (http://amzn.to/2x5pb97)
▽ Follow Me:
➞ Twitter - https://www.twitter.com/HowDoYouDIY
➞ Facebook - https://www.facebook.com/HowDoYouDIY
➞ Instagram - https://www.instagram.com/howdoyou.diy
➞ YouTube Second Channel - https://www.youtube.com/HDYDIY
▽ If You Would Like To Support Me: (optional)
➞ https://www.buymeacoffee.com/HowDoYouDIY
➞ Or click the Thanks button below the video
▽Music:
Phantom Sage - MIKO [NCS Release]
➞ https://youtu.be/7t8lRdpv5IQ
▽ Phantom Sage:
➞ Facebook - https://www.facebook.com/thefantomofficial
➞ YouTube - http://www.youtube.com/phantomsage
➞ SoundCloud - https://soundcloud.com/phantomsage
➞ Twitter - https://twitter.com/_phantomsage_ Make Gummy Jello Shots](https://i.ytimg.com/vi/XzEPzr-8SHU/mqdefault.jpg)

![Turn a Stump Into a Planter
There is an old tree stump in my yard. I decided that instead of removing the stump, I would rather put it to some use and grow some flowers in it. One tip that I would recommend is before adding the dirt, give it some drainage holes out of the back. Whenever it rains a lot this ends up getting too much water.
My Instructables Link:
➞ https://www.instructables.com/id/Turn-a-Stump-Into-a-Planter
My Second Channel:
➞ https://www.youtube.com/hdydiy
▽▽ ▽▽
If you would like to help support this channel, check out my Amazon affiliate links below. I earn a small commission for anything you buy after clicking them, and you dont pay any more than you normally would.
▽▽ ▽▽
My Amazon Storefront
➞ https://www.amazon.com/shop/howdoyoudiy/
Just For Fun
➞ https://amzn.to/3RBtLIn
▽ Here are some tools that I used:
Pencil
Drill (http://amzn.to/2fzmdTN)
2 Inch Forstner Bit (https://amzn.to/2TuK7F1)
Chisel (https://amzn.to/2thfhSK)
Hammer (http://amzn.to/2fFqDfJ)
▽ Follow Me:
➞ Twitter - https://www.twitter.com/HowDoYouDIY
➞ Facebook - https://www.facebook.com/HowDoYouDIY
➞ Instagram - https://www.instagram.com/howdoyou.diy
➞ YouTube Second Channel - https://www.youtube.com/HDYDIY
▽ If You Would Like To Support Me: (optional)
➞ https://www.buymeacoffee.com/HowDoYouDIY
➞ Or click the Thanks button below the video
▽ Music:
Electro-Light - Symbolism [NCS Release]
➞ https://youtu.be/ CRWE-L45k
Distrion & Alex Skrindo - Entropy [NCS Release]
➞ https://youtu.be/iaKgF1Vf5bQ
▽ Follow Electro-Light:
➞ Facebook - https://www.facebook.com/ElectroLightOfficial
➞ SoundCloud - https://soundcloud.com/maskedacoustic
➞ Twitter - https://twitter.com/ElectroLightEDM
➞ YouTube - https://www.youtube.com/user/ElectroLightOfficial
▽ Follow Distrion:
➞ SoundCloud - https://soundcloud.com/distrion
➞ Facebook - https://www.facebook.com/distrionmusic
➞ Twitter - https://twitter.com/Distrionoficial
▽ Follow Alex Skrindo:
➞ SoundCloud - https://soundcloud.com/alex-skrindo
➞ Facebook - https://www.facebook.com/AlexanderSkrindo
➞ Twitter - https://twitter.com/AlexSkrindo Turn a Stump Into a Planter](https://i.ytimg.com/vi/ZTs7qpW9suo/mqdefault.jpg)