Wood By Wright ASMR | Make a Turning Saw/ Coping Saw LIVE @WoodByWright | Uploaded 3 years ago | Updated 2 hours ago
We will be making a Coping saw live so you can build along in real-time. we will be using the kit from Tay tools here: https://lddy.no/zuqz I will be using these blades: https://lddy.no/zval but feel free to get whatever pin blade you want you just have to change the length of the center beam. we will need some fast strong epoxy and this is what I will be using: https://lddy.no/zvb4
You can also download the pattern I will be using here: woodbywright.com/shop/turning-saw-pattern
I look forward to seeing you On Aug. 7th at 8am CST.
00:00:00 James Wright: What are we going to do today?
11:00 GrandpaEwan Builds: Is that fast set epoxy you used?
21:00 meir zrian: Do I need a different shaft for a European saw blade?
22:00 Homesteading Northern Michigan: where do I get this blade? What's the length?
29:00 Ibrahim Shah: How does one get into woodworking as a career?
31:00 love cards 123: Is it possible to sharpen a saw with hardened teeth using sandpaper or a diamond file?
34:00 Bob T252: I came in late. How did James determine the length of the stretcher?
41:00 Flyfishinchief: I’m currently building one with the Grammercy kit. Your live videos from a few years ago were very helpful. My mortises and tenons are a bit more looser than wanted. Will it still work once tensioned?
59:00 Mo Herbert: would a small plate be acceptable for a substitution?
1:12:00 Homesteading Northern Michigan: will you be carving on this after?
1:28:00 Matthew Buntyn: Are there any other tools on your "I'd like to try making one of those" list?
1:31:00 Trumjm: Do you ever use sandpaper?
1:44:00 Wei Huang: Is Windex used to prevent rust compared to plain water?
1:53:00 Vanessa Kitty: What type of spokeshave is that one?
1:55:00 Wei Huang: Can we make our own spokeshave?
2:02:00 Dane J: Are you going to taper the upper half of the arms?
2:14:00 Bill Palmer: Would cotton wood be a good choice to use?
2:21:00 R G: tooth count on the blade?
Join this channel to get access to perks:
https://www.youtube.com/channel/UCbMt...
How To Channel
Wood By Wright 2: https://www.youtube.com/channel/UCQNF...
---Tools I Suggest---
https://www.woodbywright.com/tool-sug...
---Find Antique tools near you---
http://www.HandTool
////Help this channel grow\\\\
woodbywright.com/support
////You Can find me:\\\\
woodbywright.com/contact-me
We will be making a Coping saw live so you can build along in real-time. we will be using the kit from Tay tools here: https://lddy.no/zuqz I will be using these blades: https://lddy.no/zval but feel free to get whatever pin blade you want you just have to change the length of the center beam. we will need some fast strong epoxy and this is what I will be using: https://lddy.no/zvb4
You can also download the pattern I will be using here: woodbywright.com/shop/turning-saw-pattern
I look forward to seeing you On Aug. 7th at 8am CST.
00:00:00 James Wright: What are we going to do today?
11:00 GrandpaEwan Builds: Is that fast set epoxy you used?
21:00 meir zrian: Do I need a different shaft for a European saw blade?
22:00 Homesteading Northern Michigan: where do I get this blade? What's the length?
29:00 Ibrahim Shah: How does one get into woodworking as a career?
31:00 love cards 123: Is it possible to sharpen a saw with hardened teeth using sandpaper or a diamond file?
34:00 Bob T252: I came in late. How did James determine the length of the stretcher?
41:00 Flyfishinchief: I’m currently building one with the Grammercy kit. Your live videos from a few years ago were very helpful. My mortises and tenons are a bit more looser than wanted. Will it still work once tensioned?
59:00 Mo Herbert: would a small plate be acceptable for a substitution?
1:12:00 Homesteading Northern Michigan: will you be carving on this after?
1:28:00 Matthew Buntyn: Are there any other tools on your "I'd like to try making one of those" list?
1:31:00 Trumjm: Do you ever use sandpaper?
1:44:00 Wei Huang: Is Windex used to prevent rust compared to plain water?
1:53:00 Vanessa Kitty: What type of spokeshave is that one?
1:55:00 Wei Huang: Can we make our own spokeshave?
2:02:00 Dane J: Are you going to taper the upper half of the arms?
2:14:00 Bill Palmer: Would cotton wood be a good choice to use?
2:21:00 R G: tooth count on the blade?
Join this channel to get access to perks:
https://www.youtube.com/channel/UCbMt...
How To Channel
Wood By Wright 2: https://www.youtube.com/channel/UCQNF...
---Tools I Suggest---
https://www.woodbywright.com/tool-sug...
---Find Antique tools near you---
http://www.HandTool
////Help this channel grow\\\\
woodbywright.com/support
////You Can find me:\\\\
woodbywright.com/contact-me
