Mark Lindsay CNC | Live Q&A #188 – Z Zero Position - Machine Bed AND Material Surface @MarkLindsayCNC | Uploaded 1 year ago | Updated 9 hours ago
Click MORE!
This week I will answer your questions about setting Z zero position to the machine bed AND the material surface in Vectric Aspire, in a single file!
I will also I'll answer your general CNC or Vectric Software question! So, join me at Noon Pacific Time, 3 pm Eastern Time for this week’s Live Q&A, and get your questions answered!
Link to my video Z Zero Position - Machine Bed AND Material Surface: youtu.be/uIgbkE-r4AY
As usual, if you have any comments or questions, please put ‘em in the comment section below.
Thanks for watching!
Link to Wood if I Could Scroll Saw Live Stream "Daily Scrolls" : youtube.com/watch?v=A4XXMBV5OCU
Link to my video Create a 3D Barn Star in Vectric Aspire: youtube.com/watch?v=3lvtm8iw0eY
Link to my video Introduction to Work and Fixture Offsets: youtube.com/watch?v=qo0h4Jdp-AQ
Link to my video Creating Two Fixture Offsets in Mach4: youtube.com/watch?v=NpQ5Fgwqaqk
Link to Michael Mezalick’s YouTube channel: youtube.com/user/mezalick
Link to CNCnutz (Peter Passuello’s) YouTube channel: youtube.com/c/cncnutz
Click the JOIN button to get access to perks: youtube.com/marklindsaycnc/join
Here’s a link to a YouTube page that gives you more info about Channel Memberships, how to join, upgrade or downgrade your membership, or how to cancel your membership: youtube.com/intl/en_au/join
Please remember that I am NOT a CNC expert, and I cannot help you troubleshoot your CNC router. Every CNC router, controller, and controller software is different. Your best option is to contact your CNC manufacturer’s Tech Support division, or look for a Support Forum or Support Community through their website. They are the people who know your machine best, while I would only be guessing.
Link to Mark’s Other Channel. My second YouTube channel that’s dedicated to non-CNC related projects. youtube.com/channel/UCXMdT30E3tx7myvt9jGx-pA
______________________________________________________________________________
If you’d like to support my channel, help fund the shop/shed build, and help with the making of future videos, you can donate by using the following link:
PayPal: paypal.me/MarkLindsayCNC
_______________________________________________________________________________
Link to the Vectric for the Absolute Beginner Playlist: youtube.com/playlist?list=PLLuYLaC3-QRNuVTej2P5emp1D4_Tm774p
Link to the 3D Modeling for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QRPb0jNAfuB-xOlAUHWl1wkC
Link to the V-Carving for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QROVf1Ua9BhGCzBty2FhZFmE
___________________________________________________________________________________
Get your Official Mark Lindsay CNC T-shirts and coffee mugs here:
http://marklindsaycnc.com/index.php/product-category/logo-products
___________________________________________________________________________________
marklindsaycnc.com is sponsored by Harneal Media – a website developing company that specializes in websites for the maker community. Find out more at:
harnealmedia.com
For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at:
http://www.vectric.com
For more tutorials on how to use Vectric Software, as well as some very cool projects, visit and subscribe to Vectric’s YouTube channel: youtube.com/user/Vectric
For more info, or to configure an Avid CNC of your own, visit their website: avidcnc.com
__________________________________________________________________________________
Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos.
I appreciate your support!
This video is for informational and entertainment purposes only.
#avidcnc #vectric #cncrouter
Check out StreamYard: streamyard.com/pal/5708919750000640
Click MORE!
This week I will answer your questions about setting Z zero position to the machine bed AND the material surface in Vectric Aspire, in a single file!
I will also I'll answer your general CNC or Vectric Software question! So, join me at Noon Pacific Time, 3 pm Eastern Time for this week’s Live Q&A, and get your questions answered!
Link to my video Z Zero Position - Machine Bed AND Material Surface: youtu.be/uIgbkE-r4AY
As usual, if you have any comments or questions, please put ‘em in the comment section below.
Thanks for watching!
Link to Wood if I Could Scroll Saw Live Stream "Daily Scrolls" : youtube.com/watch?v=A4XXMBV5OCU
Link to my video Create a 3D Barn Star in Vectric Aspire: youtube.com/watch?v=3lvtm8iw0eY
Link to my video Introduction to Work and Fixture Offsets: youtube.com/watch?v=qo0h4Jdp-AQ
Link to my video Creating Two Fixture Offsets in Mach4: youtube.com/watch?v=NpQ5Fgwqaqk
Link to Michael Mezalick’s YouTube channel: youtube.com/user/mezalick
Link to CNCnutz (Peter Passuello’s) YouTube channel: youtube.com/c/cncnutz
Click the JOIN button to get access to perks: youtube.com/marklindsaycnc/join
Here’s a link to a YouTube page that gives you more info about Channel Memberships, how to join, upgrade or downgrade your membership, or how to cancel your membership: youtube.com/intl/en_au/join
Please remember that I am NOT a CNC expert, and I cannot help you troubleshoot your CNC router. Every CNC router, controller, and controller software is different. Your best option is to contact your CNC manufacturer’s Tech Support division, or look for a Support Forum or Support Community through their website. They are the people who know your machine best, while I would only be guessing.
Link to Mark’s Other Channel. My second YouTube channel that’s dedicated to non-CNC related projects. youtube.com/channel/UCXMdT30E3tx7myvt9jGx-pA
______________________________________________________________________________
If you’d like to support my channel, help fund the shop/shed build, and help with the making of future videos, you can donate by using the following link:
PayPal: paypal.me/MarkLindsayCNC
_______________________________________________________________________________
Link to the Vectric for the Absolute Beginner Playlist: youtube.com/playlist?list=PLLuYLaC3-QRNuVTej2P5emp1D4_Tm774p
Link to the 3D Modeling for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QRPb0jNAfuB-xOlAUHWl1wkC
Link to the V-Carving for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QROVf1Ua9BhGCzBty2FhZFmE
___________________________________________________________________________________
Get your Official Mark Lindsay CNC T-shirts and coffee mugs here:
http://marklindsaycnc.com/index.php/product-category/logo-products
___________________________________________________________________________________
marklindsaycnc.com is sponsored by Harneal Media – a website developing company that specializes in websites for the maker community. Find out more at:
harnealmedia.com
For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at:
http://www.vectric.com
For more tutorials on how to use Vectric Software, as well as some very cool projects, visit and subscribe to Vectric’s YouTube channel: youtube.com/user/Vectric
For more info, or to configure an Avid CNC of your own, visit their website: avidcnc.com
__________________________________________________________________________________
Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos.
I appreciate your support!
This video is for informational and entertainment purposes only.
#avidcnc #vectric #cncrouter
Check out StreamYard: streamyard.com/pal/5708919750000640