Model a 3D Barn Star in Vectric Aspire Mark Lindsay CNC 2020-04-05 | Model a 3D Barn Star in Vectric AspireMore down here ↓↓↓ Click SHOW MORE! In this video, I’ll show you how I modeled a 5 pointed star in Vectric Aspire software. I’ll show you how I created the star vector, then demonstrate the fight I had to get the sharp, angular shape I wanted, using the Create a Shape tool. Then I’ll demonstrate creating the same star using a Two-Rail Sweep. We’ll create the drive rail vectors, and create the vector cross section for sweeping.Then I’ll calculate the toolpaths and preview them to demonstrate the completed model.As usual, if you have any comments or questions, please put ‘em in the comment section below. On Sunday, April 5th, I’ll be hosting a LIVE Q&A session, where you can ask your questions pertaining to anything I covered in this video. That Q&A starts at 3 pm Eastern time, Noon Pacific time. Hope to see you there!Here’s a link to the Live Q&A:Thanks for watching!I’m sorry, but the model used to demonstrate in this video is not available.______________________________________________________________________________Link to The Trampled Underfoot Podcast. "Two guys from different decades, backgrounds, and opposite sides of the continent discuss life, the universe, and everything. What's the show about? About an hour..." YouTube: youtube.com/channel/UCPYOVYk9g-o0tliUqO18gnQFacebook Page: facebook.com/pg/TrampledUnderfootPodcastPast Episodes available at our website: trampledunderfootpodcast.com______________________________________________________________________________Link to the Vectric for the Absolute Beginner Playlist: youtube.com/playlist?list=PLLuYLaC3-QRNuVTej2P5emp1D4_Tm774pLink to the 3D Modeling for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QRPb0jNAfuB-xOlAUHWl1wkCLink to the V-Carving for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QROVf1Ua9BhGCzBty2FhZFmE______________________________________________________________________________Get your Official Mark Lindsay CNC T-shirts and coffee mugs here:http://marklindsaycnc.com/index.php/product-category/logo-productsI’m a proud founding member of the Maker’s Media Network. Come check us out at: http://makersmedianetwork.commarklindsaycnc.com is sponsored by Harneal Media – a website developing company that specializes in websites for the maker community. Find out more at:harnealmedia.com______________________________________________________________________________For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at:http://www.vectric.com______________________________________________________________________________If you’d like to support my channel and help with the making of future videos, you can donate by using any of the following links:StreamLab : streamlabs.com/marklindsaycncPayPal: paypal.me/MarkLindsayCNCSome links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos. I appreciate your support! This video is for informational and entertainment purposes only.#Aspire #VCarvePro #Tutorial #Beginner #NotSponsored
Live Q&A #218 – Zero Plane Discussion – Open Q&A Mark Lindsay CNC 2023-11-17 | Live Q&A #218 – Zero Plane Discussion – Open Q&A More down here ↓↓↓ Click MORE! This week I’ll be answering questions about the Zero Plane in addition to our regular Open Live Q&A, where I'll answer your general CNC or Vectric Software questions. So, join me at Noon Pacific Time, 3 pm Eastern Time for this week’s Live Q&A, and get your questions answered! As usual, if you have any comments or questions, please put ‘em in the comment section below. Thanks for watching! Link to the GoFundMe for my grand niece, their son, and their unborn baby after the passing of my grand nephew. Any and all donations, large or small, is greatly appreciated. gofund.me/1396c663 Links to videos, Playlists, YouTube channels, products, and supplies as discussed in this video: Link to Michael Mezalick’s YouTube channel: youtube.com/user/mezalick Link to CNCnutz (Peter Passuello’s) YouTube channel: youtube.com/c/cncnutz Link to Laney Shaughnessy’s YouTube channel SpindleTV: youtube.com/@SpindleTV Link to the Facebook group The Make, run by Bull Shanagan: facebook.com/groups/480119312742098 Link to Bull Shanagan’s website for One-on-One Vectric instruction: bullshanagan.com Link to the Vectric for the Absolute Beginner Playlist: youtube.com/playlist?list=PLLuYLaC3-QRNuVTej2P5emp1D4_Tm774p Link to the 3D Modeling for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QRPb0jNAfuB-xOlAUHWl1wkC Link to the V-Carving for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QROVf1Ua9BhGCzBty2FhZFmE ______________________________________________________________________________ Click the JOIN button to get access to perks: youtube.com/marklindsaycnc/join Here’s a link to a YouTube page that gives you more info about Channel Memberships, how to join, upgrade or downgrade your membership, or how to cancel your membership: youtube.com/intl/en_au/join Please remember that I am NOT a CNC expert, and I cannot help you troubleshoot your CNC router. Every CNC router, controller, and controller software is different. Your best option is to contact your CNC manufacturer’s Tech Support division, or look for a Support Forum or Support Community through their website. They are the people who know your machine best, while I would only be guessing. Link to Mark’s Other Channel. My second YouTube channel that’s dedicated to non-CNC related projects. youtube.com/channel/UCXMdT30E3tx7myvt9jGx-pA ______________________________________________________________________________ If you’d like to support my channel, help fund the shop/shed build, and help with the making of future videos, you can donate by using the link below: PayPal: paypal.me/MarkLindsayCNC ___________________________________________________________________________________ Get your Official Mark Lindsay CNC T-shirts and coffee mugs here: http://marklindsaycnc.com/index.php/product-category/logo-products marklindsaycnc.com is sponsored by Harneal Media – a website developing company that specializes in websites for the maker community. Find out more at: harnealmedia.com ___________________________________________________________________________________ For more info, or to configure an Avid CNC of your own, visit their website: avidcnc.com For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at: http://www.vectric.com For more tutorials on how to use Vectric Software, as well as some very cool projects, visit and subscribe to Vectric’s YouTube channel: youtube.com/user/Vectric Interested in hosting your own live streams? Check out StreamYard: streamyard.com/pal/5708919750000640 __________________________________________________________________________________ Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos. I appreciate your support! This video is for informational and entertainment purposes only. #Aspire #VCarvePro #Tutorial #Beginner Check out StreamYard: streamyard.com/pal/d/5708919750000640
Live Q&A #217 – Open Q&A - Inside and Outside Leads Mark Lindsay CNC 2023-11-13 | Live Q&A #217 – Open Q&A More down here ↓↓↓ Click MORE! This week is an Open Live Q&A where I'll answer your general CNC or Vectric Software questions. So, join me at Noon Pacific Time, 3 pm Eastern Time for this week’s Live Q&A, and get your questions answered! As usual, if you have any comments or questions, please put ‘em in the comment section below. Thanks for watching! Links to videos, Playlists, YouTube channels, products, and supplies as discussed in this video:Link to Keith Moreland's Etsy shop (One Guy in a Shop) for Dust Shoes: etsy.com/shop/OneGuyInAShop Link to my video Intro to Ramps and Leads: youtube.com/watch?v=qndxWC--rO8 Link to my video Combining Ramps and Leads: youtube.com/watch?v=lI4ZM2xMabs Link to Michael Mezalick’s YouTube channel: youtube.com/user/mezalick Link to CNCnutz (Peter Passuello’s) YouTube channel: youtube.com/c/cncnutz Link to Laney Shaughnessy’s YouTube channel SpindleTV: youtube.com/@SpindleTV Link to the Facebook group The Make, run by Bull Shanagan: facebook.com/groups/480119312742098 Link to Bull Shanagan’s website for One-on-One Vectric instruction: bullshanagan.com Link to the Vectric for the Absolute Beginner Playlist: youtube.com/playlist?list=PLLuYLaC3-QRNuVTej2P5emp1D4_Tm774p Link to the 3D Modeling for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QRPb0jNAfuB-xOlAUHWl1wkC Link to the V-Carving for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QROVf1Ua9BhGCzBty2FhZFmE ______________________________________________________________________________ Click the JOIN button to get access to perks: youtube.com/marklindsaycnc/join Here’s a link to a YouTube page that gives you more info about Channel Memberships, how to join, upgrade or downgrade your membership, or how to cancel your membership: youtube.com/intl/en_au/join Please remember that I am NOT a CNC expert, and I cannot help you troubleshoot your CNC router. Every CNC router, controller, and controller software is different. Your best option is to contact your CNC manufacturer’s Tech Support division, or look for a Support Forum or Support Community through their website. They are the people who know your machine best, while I would only be guessing. Link to Mark’s Other Channel. My second YouTube channel that’s dedicated to non-CNC related projects. youtube.com/channel/UCXMdT30E3tx7myvt9jGx-pA ______________________________________________________________________________ If you’d like to support my channel, help fund the shop/shed build, and help with the making of future videos, you can donate by using the link below: PayPal: paypal.me/MarkLindsayCNC ___________________________________________________________________________________ Get your Official Mark Lindsay CNC T-shirts and coffee mugs here: http://marklindsaycnc.com/index.php/product-category/logo-products marklindsaycnc.com is sponsored by Harneal Media – a website developing company that specializes in websites for the maker community. Find out more at: harnealmedia.com ___________________________________________________________________________________ For more info, or to configure an Avid CNC of your own, visit their website: avidcnc.com For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at: http://www.vectric.com For more tutorials on how to use Vectric Software, as well as some very cool projects, visit and subscribe to Vectric’s YouTube channel: youtube.com/user/Vectric Interested in hosting your own live streams? Check out StreamYard: streamyard.com/pal/5708919750000640 __________________________________________________________________________________ Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos. I appreciate your support! This video is for informational and entertainment purposes only. #Aspire #VCarvePro #Tutorial #Beginner Check out StreamYard: streamyard.com/pal/d/5708919750000640
Live Q&A #216 – Open Q&A Mark Lindsay CNC 2023-11-06 | Live Q&A #216 – Open Q&A More down here ↓↓↓ Click MORE! This week is an Open Live Q&A where I'll answer your general CNC or Vectric Software questions. So, join me at Noon Pacific Time, 3 pm Eastern Time for this week’s Live Q&A, and get your questions answered! As usual, if you have any comments or questions, please put ‘em in the comment section below. Thanks for watching! Link to info on the Arizona CNC Makers Meetup in Tempe, AZ hosted by Rob Shuster and Cody Elkins on November 11th: facebook.com/events/1284649302252754/?ti=ls Links to videos, Playlists, YouTube channels, products, and supplies as discussed in this video: Link to my video on Importing Vectors from Sketchup: youtube.com/watch?v=8ANkRv2QHTg Link to Design and Make (3D Models. For VCarve use .V3M file. For Aspire, use .V3M or .3DClip files): designandmake.comLink to Vectric's tutorial video Intro to 3D Modeling: youtube.com/watch?v=Kg_JdgV1DsY Link to Michael Mezalick’s YouTube channel: youtube.com/user/mezalick Link to CNCnutz (Peter Passuello’s) YouTube channel: youtube.com/c/cncnutz Link to Laney Shaughnessy’s YouTube channel SpindleTV: youtube.com/@SpindleTV Link to the Facebook group The Make, run by Bull Shanagan: facebook.com/groups/480119312742098 Link to Bull Shanagan’s website for One-on-One Vectric instruction: bullshanagan.com Link to the Vectric for the Absolute Beginner Playlist: youtube.com/playlist?list=PLLuYLaC3-QRNuVTej2P5emp1D4_Tm774p Link to the 3D Modeling for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QRPb0jNAfuB-xOlAUHWl1wkC Link to the V-Carving for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QROVf1Ua9BhGCzBty2FhZFmE ______________________________________________________________________________ Click the JOIN button to get access to perks: youtube.com/marklindsaycnc/join Here’s a link to a YouTube page that gives you more info about Channel Memberships, how to join, upgrade or downgrade your membership, or how to cancel your membership: youtube.com/intl/en_au/join Please remember that I am NOT a CNC expert, and I cannot help you troubleshoot your CNC router. Every CNC router, controller, and controller software is different. Your best option is to contact your CNC manufacturer’s Tech Support division, or look for a Support Forum or Support Community through their website. They are the people who know your machine best, while I would only be guessing. Link to Mark’s Other Channel. My second YouTube channel that’s dedicated to non-CNC related projects. youtube.com/channel/UCXMdT30E3tx7myvt9jGx-pA ______________________________________________________________________________ If you’d like to support my channel, help fund the shop/shed build, and help with the making of future videos, you can donate by using the link below: PayPal: paypal.me/MarkLindsayCNC ___________________________________________________________________________________ Get your Official Mark Lindsay CNC T-shirts and coffee mugs here: http://marklindsaycnc.com/index.php/product-category/logo-products marklindsaycnc.com is sponsored by Harneal Media – a website developing company that specializes in websites for the maker community. Find out more at: harnealmedia.com ___________________________________________________________________________________ For more info, or to configure an Avid CNC of your own, visit their website: avidcnc.com For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at: http://www.vectric.com For more tutorials on how to use Vectric Software, as well as some very cool projects, visit and subscribe to Vectric’s YouTube channel: youtube.com/user/Vectric Interested in hosting your own live streams? Check out StreamYard: streamyard.com/pal/5708919750000640 __________________________________________________________________________________ Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos. I appreciate your support! This video is for informational and entertainment purposes only. #Aspire #VCarvePro #Tutorial #Beginner Check out StreamYard: streamyard.com/pal/d/5708919750000640
Live Q&A #215 – The Wobble Chess Board Mark Lindsay CNC 2023-10-30 | Live Q&A #215 – The Wobble Chess Board More down here ↓↓↓ Click MORE! This week we’ll be exploring a couple of methods in VCarve (Desktop and Pro) and Aspire for designing a wobble chess board. One method will focus on using Aspire to create the vectors and cropping a model to create the contours of the board. For the other method, we’ll delve into using VCarve or Aspire software to create the same contours, using different methods. In the process, I'll demonstrate “deconstructing” a file provided by Michael Mezalick in order to understand how he created the file. So, join me at Noon Pacific Time, 3 pm Eastern Time for this week’s Live Q&A, and get your questions answered! As usual, if you have any comments or questions, please put ‘em in the comment section below. Thanks for watching! Links to videos, Playlists, YouTube channels, products, and supplies as discussed in this video: Link to Michael Mezalick’s YouTube channel: youtube.com/user/mezalick Link to CNCnutz (Peter Passuello’s) YouTube channel: youtube.com/c/cncnutz Link to Laney Shaughnessy’s YouTube channel SpindleTV: youtube.com/@SpindleTV Link to the Facebook group The Make, run by Bull Shanagan: facebook.com/groups/480119312742098 Link to the Vectric for the Absolute Beginner Playlist: youtube.com/playlist?list=PLLuYLaC3-QRNuVTej2P5emp1D4_Tm774p Link to the 3D Modeling for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QRPb0jNAfuB-xOlAUHWl1wkC Link to the V-Carving for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QROVf1Ua9BhGCzBty2FhZFmE ______________________________________________________________________________ Click the JOIN button to get access to perks: youtube.com/marklindsaycnc/join Here’s a link to a YouTube page that gives you more info about Channel Memberships, how to join, upgrade or downgrade your membership, or how to cancel your membership: youtube.com/intl/en_au/join Please remember that I am NOT a CNC expert, and I cannot help you troubleshoot your CNC router. Every CNC router, controller, and controller software is different. Your best option is to contact your CNC manufacturer’s Tech Support division, or look for a Support Forum or Support Community through their website. They are the people who know your machine best, while I would only be guessing. Link to Mark’s Other Channel. My second YouTube channel that’s dedicated to non-CNC related projects. youtube.com/channel/UCXMdT30E3tx7myvt9jGx-pA ______________________________________________________________________________ If you’d like to support my channel, help fund the shop/shed build, and help with the making of future videos, you can donate by using the link below: PayPal: paypal.me/MarkLindsayCNC ___________________________________________________________________________________ Get your Official Mark Lindsay CNC T-shirts and coffee mugs here: http://marklindsaycnc.com/index.php/product-category/logo-products marklindsaycnc.com is sponsored by Harneal Media – a website developing company that specializes in websites for the maker community. Find out more at: harnealmedia.com ___________________________________________________________________________________ For more info, or to configure an Avid CNC of your own, visit their website: avidcnc.com For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at: http://www.vectric.com For more tutorials on how to use Vectric Software, as well as some very cool projects, visit and subscribe to Vectric’s YouTube channel: youtube.com/user/Vectric Interested in hosting your own live streams? Check out StreamYard: streamyard.com/pal/5708919750000640 __________________________________________________________________________________ Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos. I appreciate your support! This video is for informational and entertainment purposes only. #Aspire #VCarvePro #Tutorial #Beginner Check out StreamYard: streamyard.com/pal/d/5708919750000640
Live Q&A #214 – Open Q&A Mark Lindsay CNC 2023-10-23 | Live Q&A #214 – Open Q&A More down here ↓↓↓ Click MORE! This week is an Open Live Q&A where I'll answer your general CNC or Vectric Software questions. So, join me at Noon Pacific Time, 3 pm Eastern Time for this week’s Live Q&A, and get your questions answered! As usual, if you have any comments or questions, please put ‘em in the comment section below. Thanks for watching! Links to videos, Playlists, YouTube channels, products, and supplies as discussed in this video: Link to my video on Work Offsets: youtube.com/watch?v=qo0h4Jdp-AQ Link to my video on Creating Multiple Work Offsets: youtube.com/watch?v=NpQ5FgwqaqkLink to Russ Tyndall's video on Adding LED Lights to Avid CNC: youtube.com/watch?v=s2zWUY5ibK0 Link to Michael Mezalick’s YouTube channel: youtube.com/user/mezalick Link to CNCnutz (Peter Passuello’s) YouTube channel: youtube.com/c/cncnutz Link to Laney Shaughnessy’s YouTube channel SpindleTV: youtube.com/@SpindleTV Link to the Facebook group The Make, run by Bull Shanagan: facebook.com/groups/480119312742098 Link to the Vectric for the Absolute Beginner Playlist: youtube.com/playlist?list=PLLuYLaC3-QRNuVTej2P5emp1D4_Tm774p Link to the 3D Modeling for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QRPb0jNAfuB-xOlAUHWl1wkC Link to the V-Carving for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QROVf1Ua9BhGCzBty2FhZFmE ______________________________________________________________________________ Click the JOIN button to get access to perks: youtube.com/marklindsaycnc/join Here’s a link to a YouTube page that gives you more info about Channel Memberships, how to join, upgrade or downgrade your membership, or how to cancel your membership: youtube.com/intl/en_au/join Please remember that I am NOT a CNC expert, and I cannot help you troubleshoot your CNC router. Every CNC router, controller, and controller software is different. Your best option is to contact your CNC manufacturer’s Tech Support division, or look for a Support Forum or Support Community through their website. They are the people who know your machine best, while I would only be guessing. Link to Mark’s Other Channel. My second YouTube channel that’s dedicated to non-CNC related projects. youtube.com/channel/UCXMdT30E3tx7myvt9jGx-pA ______________________________________________________________________________ If you’d like to support my channel, help fund the shop/shed build, and help with the making of future videos, you can donate by using the link below: PayPal: paypal.me/MarkLindsayCNC ___________________________________________________________________________________ Get your Official Mark Lindsay CNC T-shirts and coffee mugs here: http://marklindsaycnc.com/index.php/product-category/logo-products marklindsaycnc.com is sponsored by Harneal Media – a website developing company that specializes in websites for the maker community. Find out more at: harnealmedia.com ___________________________________________________________________________________ For more info, or to configure an Avid CNC of your own, visit their website: avidcnc.com For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at: http://www.vectric.com For more tutorials on how to use Vectric Software, as well as some very cool projects, visit and subscribe to Vectric’s YouTube channel: youtube.com/user/Vectric Interested in hosting your own live streams? Check out StreamYard: streamyard.com/pal/5708919750000640 __________________________________________________________________________________ Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos. I appreciate your support! This video is for informational and entertainment purposes only. #Aspire #VCarvePro #Tutorial #Beginner Check out StreamYard: streamyard.com/pal/d/5708919750000640
Live Q&A #213 – Open Q&A - Moisture Content Mark Lindsay CNC 2023-10-16 | Live Q&A #213 – Open Q&A More down here ↓↓↓ Click MORE! This week is an Open Live Q&A where I'll answer your general CNC or Vectric Software questions. So, join me at Noon Pacific Time, 3 pm Eastern Time for this week’s Live Q&A, and get your questions answered! As usual, if you have any comments or questions, please put ‘em in the comment section below. Thanks for watching! Links to videos, Playlists, YouTube channels, products, and supplies as discussed in this video: Link to M&S Woodworks YouTube channel: youtube.com/@MandSWoodworks Link to A Redneck's Guide to V-Carve Inlays: youtube.com/watch?v=t3whlKDAxYY Link to my video on Setting Z Zero to Machine Bed or Material Surface: youtube.com/watch?v=ita1zpHLKsgLink to my video on Setting Z Zero to Machine Bed AND Material Surface: youtube.com/watch?v=uIgbkE-r4AYLink to Vectric's video on Segmenting 3D Models: youtube.com/watch?v=ZPLMEYFFiAALink to Michael Mezalick's Importing Multiple 3D Models in VCarve video playlist: youtube.com/playlist?list=PLLuYLaC3-QRNG-DMxyXjwh5cRG3DRXX5TLink to Michael Mezalick’s YouTube channel: youtube.com/user/mezalick Link to CNCnutz (Peter Passuello’s) YouTube channel: youtube.com/c/cncnutz Link to Laney Shaughnessy’s YouTube channel SpindleTV: youtube.com/@SpindleTV Link to the Facebook group The Make, run by Bull Shanagan: facebook.com/groups/480119312742098 Link to the Vectric for the Absolute Beginner Playlist: youtube.com/playlist?list=PLLuYLaC3-QRNuVTej2P5emp1D4_Tm774p Link to the 3D Modeling for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QRPb0jNAfuB-xOlAUHWl1wkC Link to the V-Carving for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QROVf1Ua9BhGCzBty2FhZFmE ______________________________________________________________________________ Click the JOIN button to get access to perks: youtube.com/marklindsaycnc/join Here’s a link to a YouTube page that gives you more info about Channel Memberships, how to join, upgrade or downgrade your membership, or how to cancel your membership: youtube.com/intl/en_au/join Please remember that I am NOT a CNC expert, and I cannot help you troubleshoot your CNC router. Every CNC router, controller, and controller software is different. Your best option is to contact your CNC manufacturer’s Tech Support division, or look for a Support Forum or Support Community through their website. They are the people who know your machine best, while I would only be guessing. Link to Mark’s Other Channel. My second YouTube channel that’s dedicated to non-CNC related projects. youtube.com/channel/UCXMdT30E3tx7myvt9jGx-pA ______________________________________________________________________________ If you’d like to support my channel, help fund the shop/shed build, and help with the making of future videos, you can donate by using the link below: PayPal: paypal.me/MarkLindsayCNC ___________________________________________________________________________________ Get your Official Mark Lindsay CNC T-shirts and coffee mugs here: http://marklindsaycnc.com/index.php/product-category/logo-products marklindsaycnc.com is sponsored by Harneal Media – a website developing company that specializes in websites for the maker community. Find out more at: harnealmedia.com ___________________________________________________________________________________ For more info, or to configure an Avid CNC of your own, visit their website: avidcnc.com For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at: http://www.vectric.com For more tutorials on how to use Vectric Software, as well as some very cool projects, visit and subscribe to Vectric’s YouTube channel: youtube.com/user/Vectric Interested in hosting your own live streams? Check out StreamYard: streamyard.com/pal/5708919750000640 __________________________________________________________________________________ Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos. I appreciate your support! This video is for informational and entertainment purposes only. #Aspire #VCarvePro #Tutorial #Beginner Check out StreamYard: streamyard.com/pal/d/5708919750000640
Live Q&A #212 – Open Q&A Mark Lindsay CNC 2023-10-09 | Live Q&A #212 – Open Q&A More down here ↓↓↓ Click MORE! This week is an Open Live Q&A where I'll answer your general CNC or Vectric Software questions. So, join me at Noon Pacific Time, 3 pm Eastern Time for this week’s Live Q&A, and get your questions answered! As usual, if you have any comments or questions, please put ‘em in the comment section below. Thanks for watching! Links to videos, Playlists, YouTube channels, products, and supplies as discussed in this video: Link to my 2-Sided Machining Playlist:youtube.com/playlist?list=PLLuYLaC3-QRPY1yU-D-QcUNUIcjzYkCdbLink to the Vectric Users Group Meeting 2023 schedule: ugm.vectric.com/schedule Link to Vectric's YouTube channel: youtube.com/@vectricLink to my collaboration video with Todd at Vectric (Compass Rose inlay): youtube.com/watch?v=yUaSsL4F6_E Link to the Vectric Gadget Library (Spiral Gadget): gadgets.vectric.com/libraryLink to Michael Mezalick’s YouTube channel: youtube.com/user/mezalick Link to CNCnutz (Peter Passuello’s) YouTube channel: youtube.com/c/cncnutzLink to SpindleTV: youtube.com/@SpindleTV Link to the Facebook group The Make, run by Bull Shanagan: facebook.com/groups/480119312742098 Link to the Vectric for the Absolute Beginner Playlist: youtube.com/playlist?list=PLLuYLaC3-QRNuVTej2P5emp1D4_Tm774p Link to the 3D Modeling for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QRPb0jNAfuB-xOlAUHWl1wkC Link to the V-Carving for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QROVf1Ua9BhGCzBty2FhZFmE ______________________________________________________________________________ Click the JOIN button to get access to perks: youtube.com/marklindsaycnc/join Here’s a link to a YouTube page that gives you more info about Channel Memberships, how to join, upgrade or downgrade your membership, or how to cancel your membership: youtube.com/intl/en_au/join Please remember that I am NOT a CNC expert, and I cannot help you troubleshoot your CNC router. Every CNC router, controller, and controller software is different. Your best option is to contact your CNC manufacturer’s Tech Support division, or look for a Support Forum or Support Community through their website. They are the people who know your machine best, while I would only be guessing. Link to Mark’s Other Channel. My second YouTube channel that’s dedicated to non-CNC related projects. youtube.com/channel/UCXMdT30E3tx7myvt9jGx-pA ______________________________________________________________________________ If you’d like to support my channel, help fund the shop/shed build, and help with the making of future videos, you can donate by using the link below: PayPal: paypal.me/MarkLindsayCNC ___________________________________________________________________________________ Get your Official Mark Lindsay CNC T-shirts and coffee mugs here: http://marklindsaycnc.com/index.php/product-category/logo-products marklindsaycnc.com is sponsored by Harneal Media – a website developing company that specializes in websites for the maker community. Find out more at: harnealmedia.com ___________________________________________________________________________________ For more info, or to configure an Avid CNC of your own, visit their website: avidcnc.com For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at: http://www.vectric.com For more tutorials on how to use Vectric Software, as well as some very cool projects, visit and subscribe to Vectric’s YouTube channel: youtube.com/user/Vectric Interested in hosting your own live streams? Check out StreamYard: streamyard.com/pal/5708919750000640 __________________________________________________________________________________ Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos. I appreciate your support! This video is for informational and entertainment purposes only. #Aspire #VCarvePro #Tutorial #Beginner Check out StreamYard: streamyard.com/pal/d/5708919750000640
Live Q&A #211 – Open Q&A Mark Lindsay CNC 2023-10-02 | Live Q&A #211 – Open Q&A More down here ↓↓↓ Click MORE! This week is an Open Live Q&A where I'll answer your general CNC or Vectric Software questions. So, join me at Noon Pacific Time, 3 pm Eastern Time for this week’s Live Q&A, and get your questions answered! As usual, if you have any comments or questions, please put ‘em in the comment section below. Thanks for watching! Links to videos, Playlists, YouTube channels, products, and supplies as discussed in this video: Link to Drew Oxford's YouTube channel, Ox in the Shop (Craft Fair Setup) : youtube.com/@oxintheshop Link to my Text on a Curve Playlist: youtube.com/playlist?list=PLLuYLaC3-QROXGmO0E0r_fxmOPnnl16bQ Link to Michael Mezalick’s YouTube channel: youtube.com/user/mezalick Link to CNCnutz (Peter Passuello’s) YouTube channel: youtube.com/c/cncnutz Link to the Facebook group The Make, run by Bull Shanagan: facebook.com/groups/480119312742098 Link to the Vectric for the Absolute Beginner Playlist: youtube.com/playlist?list=PLLuYLaC3-QRNuVTej2P5emp1D4_Tm774p Link to the 3D Modeling for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QRPb0jNAfuB-xOlAUHWl1wkC Link to the V-Carving for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QROVf1Ua9BhGCzBty2FhZFmE ______________________________________________________________________________ Click the JOIN button to get access to perks: youtube.com/marklindsaycnc/join Here’s a link to a YouTube page that gives you more info about Channel Memberships, how to join, upgrade or downgrade your membership, or how to cancel your membership: youtube.com/intl/en_au/join Please remember that I am NOT a CNC expert, and I cannot help you troubleshoot your CNC router. Every CNC router, controller, and controller software is different. Your best option is to contact your CNC manufacturer’s Tech Support division, or look for a Support Forum or Support Community through their website. They are the people who know your machine best, while I would only be guessing. Link to Mark’s Other Channel. My second YouTube channel that’s dedicated to non-CNC related projects. youtube.com/channel/UCXMdT30E3tx7myvt9jGx-pA ______________________________________________________________________________ If you’d like to support my channel, help fund the shop/shed build, and help with the making of future videos, you can donate by using the link below: PayPal: paypal.me/MarkLindsayCNC ___________________________________________________________________________________ Get your Official Mark Lindsay CNC T-shirts and coffee mugs here: http://marklindsaycnc.com/index.php/product-category/logo-products marklindsaycnc.com is sponsored by Harneal Media – a website developing company that specializes in websites for the maker community. Find out more at: harnealmedia.com ___________________________________________________________________________________ For more info, or to configure an Avid CNC of your own, visit their website: avidcnc.com For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at: http://www.vectric.com For more tutorials on how to use Vectric Software, as well as some very cool projects, visit and subscribe to Vectric’s YouTube channel: youtube.com/user/Vectric Interested in hosting your own live streams? Check out StreamYard: streamyard.com/pal/5708919750000640 __________________________________________________________________________________ Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos. I appreciate your support! This video is for informational and entertainment purposes only. #Aspire #VCarvePro #Tutorial #Beginner Check out StreamYard: streamyard.com/pal/d/5708919750000640
Live Q&A #210 – Open Q&A - Version 11.55 Update Mark Lindsay CNC 2023-09-25 | Live Q&A #210 – Open Q&A More down here ↓↓↓ Click MORE! This week is an Open Live Q&A where I'll answer your general CNC or Vectric Software questions. So, join me at Noon Pacific Time, 3 pm Eastern Time for this week’s Live Q&A, and get your questions answered! As usual, if you have any comments or questions, please put ‘em in the comment section below. Thanks for watching! Links to videos, Playlists, YouTube channels, products, and supplies as discussed in this video: Link to @vectric video What's New in Version 11.55: youtube.com/watch?v=S7VscQN1TkI Link to my video on Create Stacked Text (and Create a Stacked Text Template:) youtube.com/watch?v=Ymo-f3Ew-UULink to my video on Using a Stacked Text Template: youtube.com/watch?v=Bh1PuBIoF-E Link to Michael Mezalick’s YouTube channel: youtube.com/user/mezalick Link to CNCnutz (Peter Passuello’s) YouTube channel: youtube.com/c/cncnutz Link to the Facebook group The Make, run by Bull Shanagan: facebook.com/groups/480119312742098 Link to the Vectric for the Absolute Beginner Playlist: youtube.com/playlist?list=PLLuYLaC3-QRNuVTej2P5emp1D4_Tm774p Link to the 3D Modeling for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QRPb0jNAfuB-xOlAUHWl1wkC Link to the V-Carving for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QROVf1Ua9BhGCzBty2FhZFmE ______________________________________________________________________________ Click the JOIN button to get access to perks: youtube.com/marklindsaycnc/join Here’s a link to a YouTube page that gives you more info about Channel Memberships, how to join, upgrade or downgrade your membership, or how to cancel your membership: youtube.com/intl/en_au/join Please remember that I am NOT a CNC expert, and I cannot help you troubleshoot your CNC router. Every CNC router, controller, and controller software is different. Your best option is to contact your CNC manufacturer’s Tech Support division, or look for a Support Forum or Support Community through their website. They are the people who know your machine best, while I would only be guessing. Link to Mark’s Other Channel. My second YouTube channel that’s dedicated to non-CNC related projects. youtube.com/channel/UCXMdT30E3tx7myvt9jGx-pA ______________________________________________________________________________ If you’d like to support my channel, help fund the shop/shed build, and help with the making of future videos, you can donate by using the link below: PayPal: paypal.me/MarkLindsayCNC ___________________________________________________________________________________ Get your Official Mark Lindsay CNC T-shirts and coffee mugs here: http://marklindsaycnc.com/index.php/product-category/logo-products marklindsaycnc.com is sponsored by Harneal Media – a website developing company that specializes in websites for the maker community. Find out more at: harnealmedia.com ___________________________________________________________________________________ For more info, or to configure an Avid CNC of your own, visit their website: avidcnc.com For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at: http://www.vectric.com For more tutorials on how to use Vectric Software, as well as some very cool projects, visit and subscribe to Vectric’s YouTube channel: youtube.com/user/Vectric Interested in hosting your own live streams? Check out StreamYard: streamyard.com/pal/5708919750000640 __________________________________________________________________________________ Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos. I appreciate your support! This video is for informational and entertainment purposes only. #Aspire #VCarvePro #Tutorial #Beginner Check out StreamYard: streamyard.com/pal/d/5708919750000640
Live YouTube Q&A – Open Q&A Mark Lindsay CNC 2023-09-21 | Live YouTube Q&A – Open Q&A More down here ↓↓↓ Click MORE! Over the years, I’ve been asked a lot of questions about YouTube – why I do it, how I do it, and how to get started. In this open Live Q&A, I'll do my best to answer your general YouTube questions. Please note that I am NOT a YouTube expert. There are many, many more people out there who know a LOT more than I do about YouTube, YouTube success, and content creation. I cannot tell you how to get 1 million subscribers or 10 million views on a video, and I’m not going to attempt to do so. What I WILL do is try to help you understand the basics, and help you get into a healthy mindset if you really want to get started creating and posting videos on YouTube. So, join me Wednesday, September 20th at 5 pm Pacific Time, 8 pm Eastern Time for this Live YouTube Q&A, and get your questions answered! As usual, if you have any comments or questions, please put ‘em in the comment section below. Thanks for watching! Links to videos, Playlists, YouTube channels, products, and supplies as discussed in this video: Interested in hosting your own live streams? Check out StreamYard: streamyard.com/pal/5708919750000640 Link to Team YouTube on Twitter: twitter.com/TeamYouTube Link to Audacity audio editing software: audacityteam.org Link to Davinci Resolve video editing software: blackmagicdesign.com/products/davinciresolve Link to Logitech C930e webcam: amzn.to/3r4TheV Link to Audio-Technica ATR2100x-USB Cardioid Dynamic Microphone: amzn.to/45T0Wfw Link to Shure X2u XLR-to-USB Signal Adapter, Integrated Pre-amp: amzn.to/3sTf9ue Link to HyperX Cloud II Wireless Headset: amzn.to/3LobhrD Link to Panasonic HC-V785 Video Camcorder: amzn.to/3r6705c Link to Neewer Battery 2-Pack and Dual USB Charger Kit for Panasonic HC-V785 Video Camcorder: amzn.to/3PGa3dS Link to Rode Wireless GO II Single Channel Wireless Microphone System: amzn.to/3Pg4qSc Link to Zoom ZH1 Portable Digital Recorder: amzn.to/46cel22 Link to HUACAM Lavalier Lapel Microphone: amzn.to/3EEtrl0 ______________________________________________________________________________ Click the JOIN button to get access to perks: youtube.com/marklindsaycnc/join Here’s a link to a YouTube page that gives you more info about Channel Memberships, how to join, upgrade or downgrade your membership, or how to cancel your membership: youtube.com/intl/en_au/join Please remember that I am NOT a YouTube expert, and I cannot help you troubleshoot your YouTube channel issues. Link to Mark’s Other Channel. My second YouTube channel that’s dedicated to non-CNC related projects. youtube.com/channel/UCXMdT30E3tx7myvt9jGx-pA ______________________________________________________________________________ If you’d like to support my channel, help fund the shop/shed build, and help with the making of future videos, you can donate by using the link below: PayPal: paypal.me/MarkLindsayCNC ___________________________________________________________________________________ Get your Official Mark Lindsay CNC T-shirts and coffee mugs here: http://marklindsaycnc.com/index.php/product-category/logo-products marklindsaycnc.com is sponsored by Harneal Media – a website developing company that specializes in websites for the maker community. Find out more at: harnealmedia.com ___________________________________________________________________________________ For more info, or to configure an Avid CNC of your own, visit their website: avidcnc.com For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at: http://www.vectric.com For more tutorials on how to use Vectric Software, as well as some very cool projects, visit and subscribe to Vectric’s YouTube channel: youtube.com/user/Vectric __________________________________________________________________________________ Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos. I appreciate your support! This video is for informational and entertainment purposes only. #YouTube #ContentCreator #Beginner Check out StreamYard: streamyard.com/pal/d/5708919750000640
Live Q&A #209 – Open Q&A Mark Lindsay CNC 2023-09-18 | Live Q&A #209 – Open Q&A More down here ↓↓↓ Click MORE! This week is an Open Live Q&A where I'll answer your general CNC or Vectric Software questions. So, join me at Noon Pacific Time, 3 pm Eastern Time for this week’s Live Q&A, and get your questions answered! As usual, if you have any comments or questions, please put ‘em in the comment section below. Thanks for watching! Links to videos, Playlists, YouTube channels, products, and supplies as discussed in this video: Link to Wood if I Could - John C "Daily Scrolls" Live Stream: youtube.com/watch?v=xs4OEWF41D8Link to my video on the Distort Tool Part 1: youtube.com/watch?v=IRTiQizraY8Link to my video on the Distort Tool Part 2: youtube.com/watch?v=ch_8MiTjDgQLink to my video on Creating a 50 Star Union: youtube.com/watch?v=hWcwmTIxLCg Link to Vectric's video What's New in Version 11.55: youtube.com/watch?v=S7VscQN1TkI Link to Michael Mezalick’s YouTube channel: youtube.com/user/mezalick Link to CNCnutz (Peter Passuello’s) YouTube channel: youtube.com/c/cncnutz Link to the Facebook group The Make, run by Bull Shanagan: facebook.com/groups/480119312742098 Link to the Vectric for the Absolute Beginner Playlist: youtube.com/playlist?list=PLLuYLaC3-QRNuVTej2P5emp1D4_Tm774p Link to the 3D Modeling for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QRPb0jNAfuB-xOlAUHWl1wkC Link to the V-Carving for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QROVf1Ua9BhGCzBty2FhZFmE ______________________________________________________________________________ Click the JOIN button to get access to perks: youtube.com/marklindsaycnc/join Here’s a link to a YouTube page that gives you more info about Channel Memberships, how to join, upgrade or downgrade your membership, or how to cancel your membership: youtube.com/intl/en_au/join Please remember that I am NOT a CNC expert, and I cannot help you troubleshoot your CNC router. Every CNC router, controller, and controller software is different. Your best option is to contact your CNC manufacturer’s Tech Support division, or look for a Support Forum or Support Community through their website. They are the people who know your machine best, while I would only be guessing. Link to Mark’s Other Channel. My second YouTube channel that’s dedicated to non-CNC related projects. youtube.com/channel/UCXMdT30E3tx7myvt9jGx-pA ______________________________________________________________________________ If you’d like to support my channel, help fund the shop/shed build, and help with the making of future videos, you can donate by using the link below: PayPal: paypal.me/MarkLindsayCNC ___________________________________________________________________________________ Get your Official Mark Lindsay CNC T-shirts and coffee mugs here: http://marklindsaycnc.com/index.php/product-category/logo-products marklindsaycnc.com is sponsored by Harneal Media – a website developing company that specializes in websites for the maker community. Find out more at: harnealmedia.com ___________________________________________________________________________________ For more info, or to configure an Avid CNC of your own, visit their website: avidcnc.com For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at: http://www.vectric.com For more tutorials on how to use Vectric Software, as well as some very cool projects, visit and subscribe to Vectric’s YouTube channel: youtube.com/user/Vectric Interested in hosting your own live streams? Check out StreamYard: streamyard.com/pal/5708919750000640 __________________________________________________________________________________ Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos. I appreciate your support! This video is for informational and entertainment purposes only. #Aspire #VCarvePro #Tutorial #Beginner Check out StreamYard: streamyard.com/pal/d/5708919750000640
Live Q&A #208 – Open Q&A Mark Lindsay CNC 2023-09-11 | Live Q&A #208 – Open Q&A More down here ↓↓↓ Click MORE! This week is an Open Live Q&A where I'll answer your general CNC or Vectric Software questions. So, join me at Noon Pacific Time, 3 pm Eastern Time for this week’s Live Q&A, and get your questions answered! As usual, if you have any comments or questions, please put ‘em in the comment section below. Thanks for watching! Links to videos, Playlists, YouTube channels, products, and supplies as discussed in this video: Link to my video on Setting Z Zero to Machine Bed AND Material Surface in the Same File: youtube.com/watch?v=uIgbkE-r4AY Link to Michael Mezalick’s YouTube channel: youtube.com/user/mezalick Link to CNCnutz (Peter Passuello’s) YouTube channel: youtube.com/c/cncnutz Link to the Facebook group The Make, run by Bull Shanagan: facebook.com/groups/480119312742098 Link to the Vectric for the Absolute Beginner Playlist: youtube.com/playlist?list=PLLuYLaC3-QRNuVTej2P5emp1D4_Tm774p Link to the 3D Modeling for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QRPb0jNAfuB-xOlAUHWl1wkC Link to the V-Carving for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QROVf1Ua9BhGCzBty2FhZFmE ______________________________________________________________________________ Click the JOIN button to get access to perks: youtube.com/marklindsaycnc/join Here’s a link to a YouTube page that gives you more info about Channel Memberships, how to join, upgrade or downgrade your membership, or how to cancel your membership: youtube.com/intl/en_au/join Please remember that I am NOT a CNC expert, and I cannot help you troubleshoot your CNC router. Every CNC router, controller, and controller software is different. Your best option is to contact your CNC manufacturer’s Tech Support division, or look for a Support Forum or Support Community through their website. They are the people who know your machine best, while I would only be guessing. Link to Mark’s Other Channel. My second YouTube channel that’s dedicated to non-CNC related projects. youtube.com/channel/UCXMdT30E3tx7myvt9jGx-pA ______________________________________________________________________________ If you’d like to support my channel, help fund the shop/shed build, and help with the making of future videos, you can donate by using the link below: PayPal: paypal.me/MarkLindsayCNC ___________________________________________________________________________________ Get your Official Mark Lindsay CNC T-shirts and coffee mugs here: http://marklindsaycnc.com/index.php/product-category/logo-products marklindsaycnc.com is sponsored by Harneal Media – a website developing company that specializes in websites for the maker community. Find out more at: harnealmedia.com ___________________________________________________________________________________ For more info, or to configure an Avid CNC of your own, visit their website: avidcnc.com For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at: http://www.vectric.com For more tutorials on how to use Vectric Software, as well as some very cool projects, visit and subscribe to Vectric’s YouTube channel: youtube.com/user/Vectric Interested in hosting your own live streams? Check out StreamYard: streamyard.com/pal/5708919750000640 __________________________________________________________________________________ Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos. I appreciate your support! This video is for informational and entertainment purposes only. #Aspire #VCarvePro #Tutorial #Beginner Check out StreamYard: streamyard.com/pal/d/5708919750000640
Live Q&A #207 – Open Q&A Mark Lindsay CNC 2023-09-04 | Live Q&A #207 – Open Q&A More down here ↓↓↓ Click MORE! This week is an Open Live Q&A where I'll answer your general CNC or Vectric Software questions. So, join me at Noon Pacific Time, 3 pm Eastern Time for this week’s Live Q&A, and get your questions answered! As usual, if you have any comments or questions, please put ‘em in the comment section below. Thanks for watching! Links to videos, Playlists, YouTube channels, products, and supplies as discussed in this video:Link to Wordmark: https://wordmark.it/ Link to my video on Stacked Text: youtube.com/watch?v=Ymo-f3Ew-UU Link to my video on Creating a Custom Clipart Library: youtube.com/watch?v=qePoJThpSKc Link to Michael Mezalick’s YouTube channel: youtube.com/user/mezalick Link to CNCnutz (Peter Passuello’s) YouTube channel: youtube.com/c/cncnutz Link to the Facebook group The Make, run by Bull Shanagan: facebook.com/groups/480119312742098 Link to the Vectric for the Absolute Beginner Playlist: youtube.com/playlist?list=PLLuYLaC3-QRNuVTej2P5emp1D4_Tm774p Link to the 3D Modeling for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QRPb0jNAfuB-xOlAUHWl1wkC Link to the V-Carving for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QROVf1Ua9BhGCzBty2FhZFmE ______________________________________________________________________________ Click the JOIN button to get access to perks: youtube.com/marklindsaycnc/join Here’s a link to a YouTube page that gives you more info about Channel Memberships, how to join, upgrade or downgrade your membership, or how to cancel your membership: youtube.com/intl/en_au/join Please remember that I am NOT a CNC expert, and I cannot help you troubleshoot your CNC router. Every CNC router, controller, and controller software is different. Your best option is to contact your CNC manufacturer’s Tech Support division, or look for a Support Forum or Support Community through their website. They are the people who know your machine best, while I would only be guessing. Link to Mark’s Other Channel. My second YouTube channel that’s dedicated to non-CNC related projects. youtube.com/channel/UCXMdT30E3tx7myvt9jGx-pA ______________________________________________________________________________ If you’d like to support my channel, help fund the shop/shed build, and help with the making of future videos, you can donate by using the link below: PayPal: paypal.me/MarkLindsayCNC ___________________________________________________________________________________ Get your Official Mark Lindsay CNC T-shirts and coffee mugs here: http://marklindsaycnc.com/index.php/product-category/logo-products marklindsaycnc.com is sponsored by Harneal Media – a website developing company that specializes in websites for the maker community. Find out more at: harnealmedia.com ___________________________________________________________________________________ For more info, or to configure an Avid CNC of your own, visit their website: avidcnc.com For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at: http://www.vectric.com For more tutorials on how to use Vectric Software, as well as some very cool projects, visit and subscribe to Vectric’s YouTube channel: youtube.com/user/Vectric Interested in hosting your own live streams? Check out StreamYard: streamyard.com/pal/5708919750000640 __________________________________________________________________________________ Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos. I appreciate your support! This video is for informational and entertainment purposes only. #Aspire #VCarvePro #Tutorial #Beginner Check out StreamYard: streamyard.com/pal/d/5708919750000640
LIVE Q&A #206 – Shop/Shed Update #11 Mark Lindsay CNC 2023-08-28 | LIVE Q&A #206 – Shop/Shed Update #11 More down here ↓↓↓ Click SHOW MORE! This week, I'll answer your questions on Building a Home Hobby CNC Shop/Shed - Part 11 – Lean-To Addition. Here’s a link to Building a Home Hobby CNC Shop/Shed - Part 11 – Lean-To Addition: youtu.be/396eJvJHQfE Link to the Shop/Shed Build series playlist: youtube.com/playlist?list=PLLuYLaC3-QRPWkPpMiq9o69TBb8WifCqG Link to my video on Using a Keyhole Bit in Cut2D, VCarve, and Aspire: youtube.com/watch?v=SblFFBq2bxo Links to videos, Playlists, YouTube channels, products, and supplies as discussed in this video:Link to the M5 Roll In T-Nuts I used to mount the Magnetic Tool Holder to my CNC extrusion (I sourced the M5 bolts locally to get the length I needed): amzn.to/3L3abkH Oneida Air Systems Super Dust Deputy (4/5 Deluxe): amzn.to/3YSKLvH POWERTEC 4" x 20' PVC Dust Collection Hose: amzn.to/3qVB6Ih EZ-Release Hose Clamp for 4 inch Dust Collection Hoses: amzn.to/3KZcPrH Sherwin Williams Showcase semi-gloss paint: low.es/3DDyUXA 3M Aluminum Foil Tape: amzn.to/3KVIIBs Tripp Lite 12-ft Heavy Duty Computer Power Cord: amzn.to/3PdY7Qg Cuchiilo 6inch Duct Flanges: amzn.to/45F5tBw Harbor Freight 70 gallon, 2hp Dust Collector: harborfreight.com/2-hp-industrial-5-micron-dust-collector-97869.htmlLink to Harbor Freight 18 inch Magnetic Tool Holder: harborfreight.com/18-in-magnetic-tool-holder-60433.html Link to Wood if I Could - John C's Sunday Livestream: youtube.com/watch?v=SDchXBDuUC0 Link to Michael Mezalick’s YouTube channel: youtube.com/user/mezalick Link to CNCnutz (Peter Passuello’s) YouTube channel: youtube.com/c/cncnutz Link to the Facebook group The Make, run by Bull Shanagan: facebook.com/groups/480119312742098 ______________________________________________________________________________ Link to the Vectric for the Absolute Beginner Playlist: youtube.com/playlist?list=PLLuYLaC3-QRNuVTej2P5emp1D4_Tm774p Link to the 3D Modeling for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QRPb0jNAfuB-xOlAUHWl1wkC Link to the V-Carving for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QROVf1Ua9BhGCzBty2FhZFmE ______________________________________________________________________________ Please remember that I am NOT a CNC expert, and I cannot help you troubleshoot your CNC router. Every CNC router, controller, and controller software is different. Your best option is to contact your CNC manufacturer’s Tech Support division, or look for a Support Forum or Support community. They are the people who know your machine best, while I would only be guessing. ______________________________________________________________________________ If you’d like to support my channel, help fund the shop/shed build, and help with the making of future videos, you can donate by using the link below: PayPal: paypal.me/MarkLindsayCNC ___________________________________________________________________________________ Get your Official Mark Lindsay CNC T-shirts and coffee mugs here: http://marklindsaycnc.com/index.php/product-category/logo-products I’m a proud founding member of the Maker’s Media Network. Come check us out at: http://makersmedianetwork.com ___________________________________________________________________________________ marklindsaycnc.com is sponsored by Harneal Media – a website developing company that specializes in websites for the maker community. Find out more at: harnealmedia.com For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at: http://www.vectric.com __________________________________________________________________________________ Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos. I appreciate your support! This video is for informational and entertainment purposes only. #Vectric #Q&A #Beginner Check out StreamYard: streamyard.com/pal/d/5708919750000640
Building a Home Hobby CNC Shop/Shed - Part 11 – Lean-To Addition Mark Lindsay CNC 2023-08-27 | Building a Home Hobby CNC Shop/Shed - Part 11 – Lean-To AdditionMore down here ↓↓↓ Click SHOW MORE!This is the 11th in a series of videos that will document my building a home hobby CNC shop/shed from the ground up. In this video, I’ll show you footage from the installation of a separate Lean-To shed along the west side of my Shop/Shed.I’ll show you time-lapse footage of the build/installation, then show you how I moved my dust collector into the lean-to, and plumbed in the dust collection system.As usual, if you have any comments or questions about anything I covered in this video, please join me for the Live Q&A, or put ‘em in the comment section below. On Sunday, August 27th, I’ll be hosting a LIVE Q&A session, where you can ask your questions pertaining to anything I covered in this video. That Q&A starts at 3 pm Eastern time, Noon Pacific time. Hope to see you there!Here’s a link to the Live Q&A: youtube.com/live/P2QPFfPD-M0______________________________________________________________________________Link to Tools and Supplies used in this video:Oneida Air Systems Super Dust Deputy (4/5 Deluxe): amzn.to/3YSKLvHPOWERTEC 4" x 20' PVC Dust Collection Hose: amzn.to/3qVB6IhEZ-Release Hose Clamp for 4 inch Dust Collection Hoses: amzn.to/3KZcPrHSherwin Williams Showcase semi-gloss paint: low.es/3DDyUXA3M Aluminum Foil Tape: amzn.to/3KVIIBsTripp Lite 12-ft Heavy Duty Computer Power Cord: amzn.to/3PdY7QgCuchiilo 6inch Duct Flanges: amzn.to/45F5tBwHarbor Freight 70 gallon, 2hp Dust Collector: harborfreight.com/2-hp-industrial-5-micron-dust-collector-97869.html______________________________________________________________________________Link to the Shop/Shed Build series: youtube.com/playlist?list=PLLuYLaC3-QRPWkPpMiq9o69TBb8WifCqG______________________________________________________________________________If you’d like to support my channel, help fund the shop/shed build, and help with the making of future videos, you can donate by using the link below:PayPal: paypal.me/MarkLindsayCNC______________________________________________________________________________Get your Official Mark Lindsay CNC T-shirts and coffee mugs here:http://marklindsaycnc.com/index.php/product-category/logo-productsmarklindsaycnc.com is sponsored by Harneal Media – a website developing company that specializes in websites for the maker community. Find out more at:harnealmedia.com______________________________________________________________________________For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at:http://www.vectric.com______________________________________________________________________________Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos. I appreciate your support! You Folks ROCK!This video is for informational and entertainment purposes only.#ShopShed #ShopBuild #ShedBuild #NotSponsored
Live Q&A #205 – Open Q&A Mark Lindsay CNC 2023-08-21 | Live Q&A #205 – Open Q&A More down here ↓↓↓ Click MORE! This week is an Open Live Q&A where I'll answer your general CNC or Vectric Software questions. So, join me at Noon Pacific Time, 3 pm Eastern Time for this week’s Live Q&A, and get your questions answered! As usual, if you have any comments or questions, please put ‘em in the comment section below. Thanks for watching! Links to videos, Playlists, YouTube channels, products, and supplies as discussed in this video: Link to my friend John C's live stream: youtube.com/watch?v=3kLN4uYzqmc Link to Michael Mezalick’s YouTube channel: youtube.com/user/mezalick Link to CNCnutz (Peter Passuello’s) YouTube channel: youtube.com/c/cncnutz Link to the Facebook group The Make, run by Bull Shanagan: facebook.com/groups/480119312742098 Link to the Vectric for the Absolute Beginner Playlist: youtube.com/playlist?list=PLLuYLaC3-QRNuVTej2P5emp1D4_Tm774p Link to the 3D Modeling for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QRPb0jNAfuB-xOlAUHWl1wkC Link to the V-Carving for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QROVf1Ua9BhGCzBty2FhZFmE ______________________________________________________________________________ Click the JOIN button to get access to perks: youtube.com/marklindsaycnc/join Here’s a link to a YouTube page that gives you more info about Channel Memberships, how to join, upgrade or downgrade your membership, or how to cancel your membership: youtube.com/intl/en_au/join Please remember that I am NOT a CNC expert, and I cannot help you troubleshoot your CNC router. Every CNC router, controller, and controller software is different. Your best option is to contact your CNC manufacturer’s Tech Support division, or look for a Support Forum or Support Community through their website. They are the people who know your machine best, while I would only be guessing. Link to Mark’s Other Channel. My second YouTube channel that’s dedicated to non-CNC related projects. youtube.com/channel/UCXMdT30E3tx7myvt9jGx-pA ______________________________________________________________________________ If you’d like to support my channel, help fund the shop/shed build, and help with the making of future videos, you can donate by using the link below: PayPal: paypal.me/MarkLindsayCNC ___________________________________________________________________________________ Get your Official Mark Lindsay CNC T-shirts and coffee mugs here: http://marklindsaycnc.com/index.php/product-category/logo-products marklindsaycnc.com is sponsored by Harneal Media – a website developing company that specializes in websites for the maker community. Find out more at: harnealmedia.com ___________________________________________________________________________________ For more info, or to configure an Avid CNC of your own, visit their website: avidcnc.com For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at: http://www.vectric.com For more tutorials on how to use Vectric Software, as well as some very cool projects, visit and subscribe to Vectric’s YouTube channel: youtube.com/user/Vectric Interested in hosting your own live streams? Check out StreamYard: streamyard.com/pal/5708919750000640 __________________________________________________________________________________ Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos. I appreciate your support! This video is for informational and entertainment purposes only. #Aspire #VCarvePro #Tutorial #Beginner Check out StreamYard: streamyard.com/pal/d/5708919750000640
Live Q&A #204 – Open Q&A Mark Lindsay CNC 2023-08-14 | Live Q&A #204 – Open Q&A More down here ↓↓↓ Click MORE! This week is an Open Live Q&A where I'll answer your general CNC or Vectric Software questions. So, join me at Noon Pacific Time, 3 pm Eastern Time for this week’s Live Q&A, and get your questions answered! As usual, if you have any comments or questions, please put ‘em in the comment section below. Thanks for watching! Links to videos, Playlists, YouTube channels, products, and supplies as discussed in this video:Link to Otis Technology 10 Pack AP Brush: amzn.to/45vgXaV Link to Wood if I Could John C's Live Stream: youtube.com/watch?v=yv11e4Vos-8 Link to Dennis van Hoof's 4-Sided Greek Column video: youtube.com/watch?v=jfcQBFt0ZSALink to Vectric's video on 2-Sided 3D Carving: youtube.com/watch?v=PA7RzWyvqFcLink to my video on a Simple Text Project (Address Sign): youtube.com/watch?v=QH6kkoDT3rMLink to my video on Bits and End Mills for the Absolute Beginner: youtube.com/watch?v=GA73IiT9QBE Link to Michael Mezalick’s YouTube channel: youtube.com/user/mezalick Link to CNCnutz (Peter Passuello’s) YouTube channel: youtube.com/c/cncnutz Link to the Facebook group The Make, run by Bull Shanagan: facebook.com/groups/480119312742098 Link to the Vectric for the Absolute Beginner Playlist: youtube.com/playlist?list=PLLuYLaC3-QRNuVTej2P5emp1D4_Tm774p Link to the 3D Modeling for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QRPb0jNAfuB-xOlAUHWl1wkC Link to the V-Carving for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QROVf1Ua9BhGCzBty2FhZFmE ______________________________________________________________________________ Click the JOIN button to get access to perks: youtube.com/marklindsaycnc/join Here’s a link to a YouTube page that gives you more info about Channel Memberships, how to join, upgrade or downgrade your membership, or how to cancel your membership: youtube.com/intl/en_au/join Please remember that I am NOT a CNC expert, and I cannot help you troubleshoot your CNC router. Every CNC router, controller, and controller software is different. Your best option is to contact your CNC manufacturer’s Tech Support division, or look for a Support Forum or Support Community through their website. They are the people who know your machine best, while I would only be guessing. Link to Mark’s Other Channel. My second YouTube channel that’s dedicated to non-CNC related projects. youtube.com/channel/UCXMdT30E3tx7myvt9jGx-pA ______________________________________________________________________________ If you’d like to support my channel, help fund the shop/shed build, and help with the making of future videos, you can donate by using the link below: PayPal: paypal.me/MarkLindsayCNC ___________________________________________________________________________________ Get your Official Mark Lindsay CNC T-shirts and coffee mugs here: http://marklindsaycnc.com/index.php/product-category/logo-products marklindsaycnc.com is sponsored by Harneal Media – a website developing company that specializes in websites for the maker community. Find out more at: harnealmedia.com ___________________________________________________________________________________ For more info, or to configure an Avid CNC of your own, visit their website: avidcnc.com For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at: http://www.vectric.com For more tutorials on how to use Vectric Software, as well as some very cool projects, visit and subscribe to Vectric’s YouTube channel: youtube.com/user/Vectric Interested in hosting your own live streams? Check out StreamYard: streamyard.com/pal/5708919750000640 __________________________________________________________________________________ Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos. I appreciate your support! This video is for informational and entertainment purposes only. #Aspire #VCarvePro #Tutorial #Beginner Check out StreamYard: streamyard.com/pal/d/5708919750000640
Live Q&A #203 – Open Q&A Mark Lindsay CNC 2023-08-07 | Live Q&A #203 – Open Q&A More down here ↓↓↓ Click MORE! This week is an Open Live Q&A where I'll answer your general CNC or Vectric Software questions. So, join me at Noon Pacific Time, 3 pm Eastern Time for this week’s Live Q&A, and get your questions answered! As usual, if you have any comments or questions, please put ‘em in the comment section below. Thanks for watching! Links to videos, Playlists, YouTube channels, products, and supplies as discussed in this video: Link to Michael Mezalick’s YouTube channel: youtube.com/user/mezalick Link to CNCnutz (Peter Passuello’s) YouTube channel: youtube.com/c/cncnutz Link to the Facebook group The Make, run by Bull Shanagan: facebook.com/groups/480119312742098 Link to the Vectric for the Absolute Beginner Playlist: youtube.com/playlist?list=PLLuYLaC3-QRNuVTej2P5emp1D4_Tm774p Link to the 3D Modeling for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QRPb0jNAfuB-xOlAUHWl1wkC Link to the V-Carving for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QROVf1Ua9BhGCzBty2FhZFmE ______________________________________________________________________________ Click the JOIN button to get access to perks: youtube.com/marklindsaycnc/join Here’s a link to a YouTube page that gives you more info about Channel Memberships, how to join, upgrade or downgrade your membership, or how to cancel your membership: youtube.com/intl/en_au/join Please remember that I am NOT a CNC expert, and I cannot help you troubleshoot your CNC router. Every CNC router, controller, and controller software is different. Your best option is to contact your CNC manufacturer’s Tech Support division, or look for a Support Forum or Support Community through their website. They are the people who know your machine best, while I would only be guessing. Link to Mark’s Other Channel. My second YouTube channel that’s dedicated to non-CNC related projects. youtube.com/channel/UCXMdT30E3tx7myvt9jGx-pA ______________________________________________________________________________ If you’d like to support my channel, help fund the shop/shed build, and help with the making of future videos, you can donate by using the link below: PayPal: paypal.me/MarkLindsayCNC ___________________________________________________________________________________ Get your Official Mark Lindsay CNC T-shirts and coffee mugs here: http://marklindsaycnc.com/index.php/product-category/logo-products marklindsaycnc.com is sponsored by Harneal Media – a website developing company that specializes in websites for the maker community. Find out more at: harnealmedia.com ___________________________________________________________________________________ For more info, or to configure an Avid CNC of your own, visit their website: avidcnc.com For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at: http://www.vectric.com For more tutorials on how to use Vectric Software, as well as some very cool projects, visit and subscribe to Vectric’s YouTube channel: youtube.com/user/Vectric Interested in hosting your own live streams? Check out StreamYard: streamyard.com/pal/5708919750000640 __________________________________________________________________________________ Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos. I appreciate your support! This video is for informational and entertainment purposes only. #Aspire #VCarvePro #Tutorial #Beginner Check out StreamYard: streamyard.com/pal/d/5708919750000640
Live Q&A #202 – Open Q&A Mark Lindsay CNC 2023-07-31 | Live Q&A #202 – Open Q&A More down here ↓↓↓ Click MORE! This week is an Open Live Q&A where I'll answer your general CNC or Vectric Software questions. So, join me at Noon Pacific Time, 3 pm Eastern Time for this week’s Live Q&A, and get your questions answered! As usual, if you have any comments or questions, please put ‘em in the comment section below. Thanks for watching! Links to videos, Playlists, YouTube channels, products, and supplies as discussed in this video: Link to Brooks Martin's YouTube channel (Tape Splitting): youtube.com/@brooksmartin2665 Link to Michael Mezalick’s YouTube channel: youtube.com/user/mezalick Link to CNCnutz (Peter Passuello’s) YouTube channel: youtube.com/c/cncnutz Link to the Facebook group The Make, run by Bull Shanagan: facebook.com/groups/480119312742098 Link to the Vectric for the Absolute Beginner Playlist: youtube.com/playlist?list=PLLuYLaC3-QRNuVTej2P5emp1D4_Tm774p Link to the 3D Modeling for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QRPb0jNAfuB-xOlAUHWl1wkC Link to the V-Carving for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QROVf1Ua9BhGCzBty2FhZFmE ______________________________________________________________________________ Click the JOIN button to get access to perks: youtube.com/marklindsaycnc/join Here’s a link to a YouTube page that gives you more info about Channel Memberships, how to join, upgrade or downgrade your membership, or how to cancel your membership: youtube.com/intl/en_au/join Please remember that I am NOT a CNC expert, and I cannot help you troubleshoot your CNC router. Every CNC router, controller, and controller software is different. Your best option is to contact your CNC manufacturer’s Tech Support division, or look for a Support Forum or Support Community through their website. They are the people who know your machine best, while I would only be guessing. Link to Mark’s Other Channel. My second YouTube channel that’s dedicated to non-CNC related projects. youtube.com/channel/UCXMdT30E3tx7myvt9jGx-pA ______________________________________________________________________________ If you’d like to support my channel, help fund the shop/shed build, and help with the making of future videos, you can donate by using the link below: PayPal: paypal.me/MarkLindsayCNC ___________________________________________________________________________________ Get your Official Mark Lindsay CNC T-shirts and coffee mugs here: http://marklindsaycnc.com/index.php/product-category/logo-products marklindsaycnc.com is sponsored by Harneal Media – a website developing company that specializes in websites for the maker community. Find out more at: harnealmedia.com ___________________________________________________________________________________ For more info, or to configure an Avid CNC of your own, visit their website: avidcnc.com For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at: http://www.vectric.com For more tutorials on how to use Vectric Software, as well as some very cool projects, visit and subscribe to Vectric’s YouTube channel: youtube.com/user/Vectric Interested in hosting your own live streams? Check out StreamYard: streamyard.com/pal/5708919750000640 __________________________________________________________________________________ Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos. I appreciate your support! This video is for informational and entertainment purposes only. #Aspire #VCarvePro #Tutorial #Beginner Check out StreamYard: streamyard.com/pal/d/5708919750000640
Live Q&A #201 – Open Q&A Mark Lindsay CNC 2023-07-24 | Live Q&A #201 – Open Q&A More down here ↓↓↓ Click MORE! This week is an Open Live Q&A where I'll answer your general CNC or Vectric Software questions. So, join me at Noon Pacific Time, 3 pm Eastern Time for this week’s Live Q&A, and get your questions answered! As usual, if you have any comments or questions, please put ‘em in the comment section below. Thanks for watching! Links to videos, Playlists, YouTube channels, products, and supplies as discussed in this video: Link to my video on Join and Group Vectors (and the difference between the two): youtube.com/watch?v=dWC1QesHduU Link to Stephan Forseilles video on Deep VCarving Inlays: youtube.com/watch?v=RY0zLv3wcycLink to the Facebook group The Make, run by Bull Shanagan: facebook.com/groups/480119312742098 Link to Michael Mezalick’s YouTube channel: youtube.com/user/mezalick Link to CNCnutz (Peter Passuello’s) YouTube channel: youtube.com/c/cncnutz Link to the Vectric for the Absolute Beginner Playlist: youtube.com/playlist?list=PLLuYLaC3-QRNuVTej2P5emp1D4_Tm774p Link to the 3D Modeling for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QRPb0jNAfuB-xOlAUHWl1wkC Link to the V-Carving for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QROVf1Ua9BhGCzBty2FhZFmE ______________________________________________________________________________ Click the JOIN button to get access to perks: youtube.com/marklindsaycnc/join Here’s a link to a YouTube page that gives you more info about Channel Memberships, how to join, upgrade or downgrade your membership, or how to cancel your membership: youtube.com/intl/en_au/join Please remember that I am NOT a CNC expert, and I cannot help you troubleshoot your CNC router. Every CNC router, controller, and controller software is different. Your best option is to contact your CNC manufacturer’s Tech Support division, or look for a Support Forum or Support Community through their website. They are the people who know your machine best, while I would only be guessing. Link to Mark’s Other Channel. My second YouTube channel that’s dedicated to non-CNC related projects. youtube.com/channel/UCXMdT30E3tx7myvt9jGx-pA ______________________________________________________________________________ If you’d like to support my channel, help fund the shop/shed build, and help with the making of future videos, you can donate by using the link below: PayPal: paypal.me/MarkLindsayCNC ___________________________________________________________________________________ Get your Official Mark Lindsay CNC T-shirts and coffee mugs here: http://marklindsaycnc.com/index.php/product-category/logo-products marklindsaycnc.com is sponsored by Harneal Media – a website developing company that specializes in websites for the maker community. Find out more at: harnealmedia.com ___________________________________________________________________________________ For more info, or to configure an Avid CNC of your own, visit their website: avidcnc.com For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at: http://www.vectric.com For more tutorials on how to use Vectric Software, as well as some very cool projects, visit and subscribe to Vectric’s YouTube channel: youtube.com/user/Vectric Interested in hosting your own live streams? Check out StreamYard: streamyard.com/pal/5708919750000640 __________________________________________________________________________________ Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos. I appreciate your support! This video is for informational and entertainment purposes only. #Aspire #VCarvePro #Tutorial #Beginner Check out StreamYard: streamyard.com/pal/d/5708919750000640
Live Q&A #200 – Open Q&A Mark Lindsay CNC 2023-07-17 | Live Q&A #200 – Open Q&A More down here ↓↓↓ Click MORE! This week is an Open Live Q&A where I'll answer your general CNC or Vectric Software questions. So, join me at Noon Pacific Time, 3 pm Eastern Time for this week’s Live Q&A, and get your questions answered! As usual, if you have any comments or questions, please put ‘em in the comment section below. Thanks for watching! Links to videos, Playlists, YouTube channels, products, and supplies as discussed in this video: Link to the Facebook Group "The Make" run by Bull Shanagan: facebook.com/groups/480119312742098 Link to my video on Bits and End Mills for Beginners: youtube.com/watch?v=GA73IiT9QBE Link to Michael Mezalick’s YouTube channel: youtube.com/user/mezalick Link to CNCnutz (Peter Passuello’s) YouTube channel: youtube.com/c/cncnutz Link to the Vectric for the Absolute Beginner Playlist: youtube.com/playlist?list=PLLuYLaC3-QRNuVTej2P5emp1D4_Tm774p Link to the 3D Modeling for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QRPb0jNAfuB-xOlAUHWl1wkC Link to the V-Carving for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QROVf1Ua9BhGCzBty2FhZFmE ______________________________________________________________________________ Click the JOIN button to get access to perks: youtube.com/marklindsaycnc/join Here’s a link to a YouTube page that gives you more info about Channel Memberships, how to join, upgrade or downgrade your membership, or how to cancel your membership: youtube.com/intl/en_au/join Please remember that I am NOT a CNC expert, and I cannot help you troubleshoot your CNC router. Every CNC router, controller, and controller software is different. Your best option is to contact your CNC manufacturer’s Tech Support division, or look for a Support Forum or Support Community through their website. They are the people who know your machine best, while I would only be guessing. Link to Mark’s Other Channel. My second YouTube channel that’s dedicated to non-CNC related projects. youtube.com/channel/UCXMdT30E3tx7myvt9jGx-pA ______________________________________________________________________________ If you’d like to support my channel, help fund the shop/shed build, and help with the making of future videos, you can donate by using the link below: PayPal: paypal.me/MarkLindsayCNC ___________________________________________________________________________________ Get your Official Mark Lindsay CNC T-shirts and coffee mugs here: http://marklindsaycnc.com/index.php/product-category/logo-products marklindsaycnc.com is sponsored by Harneal Media – a website developing company that specializes in websites for the maker community. Find out more at: harnealmedia.com ___________________________________________________________________________________ For more info, or to configure an Avid CNC of your own, visit their website: avidcnc.com For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at: http://www.vectric.com For more tutorials on how to use Vectric Software, as well as some very cool projects, visit and subscribe to Vectric’s YouTube channel: youtube.com/user/Vectric Interested in hosting your own live streams? Check out StreamYard: streamyard.com/pal/5708919750000640 __________________________________________________________________________________ Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos. I appreciate your support! This video is for informational and entertainment purposes only. #Aspire #VCarvePro #Tutorial #Beginner Check out StreamYard: streamyard.com/pal/d/5708919750000640
Live Q&A #199 – Open Q&A Mark Lindsay CNC 2023-07-10 | Live Q&A #199 – Open Q&A More down here ↓↓↓ Click MORE! This week is an Open Live Q&A where I'll answer your general CNC or Vectric Software questions. So, join me at Noon Pacific Time, 3 pm Eastern Time for this week’s Live Q&A, and get your questions answered! As usual, if you have any comments or questions, please put ‘em in the comment section below. Thanks for watching! Links to videos, Playlists, YouTube channels, products, and supplies as discussed in this video: Link to my video on Importing STL Files in Vectric Software Version 11.0 and later: youtube.com/watch?v=r5PY4DmFKwE Link to my video on Importing STL Files in Vectric Software Version 10.5 and Older: youtube.com/watch?v=GSkFb-5lXkgLink to the Facebook group The Make, run by Bull Shanagan: facebook.com/groups/480119312742098 Link to Michael Mezalick’s YouTube channel: youtube.com/user/mezalick Link to CNCnutz (Peter Passuello’s) YouTube channel: youtube.com/c/cncnutz Link to the Vectric for the Absolute Beginner Playlist: youtube.com/playlist?list=PLLuYLaC3-QRNuVTej2P5emp1D4_Tm774p Link to the 3D Modeling for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QRPb0jNAfuB-xOlAUHWl1wkC Link to the V-Carving for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QROVf1Ua9BhGCzBty2FhZFmE ______________________________________________________________________________ Click the JOIN button to get access to perks: youtube.com/marklindsaycnc/join Here’s a link to a YouTube page that gives you more info about Channel Memberships, how to join, upgrade or downgrade your membership, or how to cancel your membership: youtube.com/intl/en_au/join Please remember that I am NOT a CNC expert, and I cannot help you troubleshoot your CNC router. Every CNC router, controller, and controller software is different. Your best option is to contact your CNC manufacturer’s Tech Support division, or look for a Support Forum or Support Community through their website. They are the people who know your machine best, while I would only be guessing. Link to Mark’s Other Channel. My second YouTube channel that’s dedicated to non-CNC related projects. youtube.com/channel/UCXMdT30E3tx7myvt9jGx-pA ______________________________________________________________________________ If you’d like to support my channel, help fund the shop/shed build, and help with the making of future videos, you can donate by using the link below: PayPal: paypal.me/MarkLindsayCNC ___________________________________________________________________________________ Get your Official Mark Lindsay CNC T-shirts and coffee mugs here: http://marklindsaycnc.com/index.php/product-category/logo-products marklindsaycnc.com is sponsored by Harneal Media – a website developing company that specializes in websites for the maker community. Find out more at: harnealmedia.com ___________________________________________________________________________________ For more info, or to configure an Avid CNC of your own, visit their website: avidcnc.com For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at: http://www.vectric.com For more tutorials on how to use Vectric Software, as well as some very cool projects, visit and subscribe to Vectric’s YouTube channel: youtube.com/user/Vectric Interested in hosting your own live streams? Check out StreamYard: streamyard.com/pal/5708919750000640 __________________________________________________________________________________ Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos. I appreciate your support! This video is for informational and entertainment purposes only. #Aspire #VCarvePro #Tutorial #Beginner Check out StreamYard: streamyard.com/pal/d/5708919750000640
Live Q&A #198 – Open Q&A Mark Lindsay CNC 2023-07-03 | More down here ↓↓↓ Click MORE! This week is an Open Live Q&A where I'll answer your general CNC or Vectric Software questions. So, join me at Noon Pacific Time, 3 pm Eastern Time for this week’s Live Q&A, and get your questions answered! As usual, if you have any comments or questions, please put ‘em in the comment section below. Thanks for watching! Link to the GoFundMe to help my friend Steve Nealon and his family in their time of crisis. Every contribution, large or small, will help them with his mother’s final costs. I thank you sincerely. gofund.me/3a25d602 Links to videos, Playlists, YouTube channels, products, and supplies as discussed in this video: Link to CNCnutz (Peter Passuello's) video on Sharpening Your Cutters: youtube.com/watch?v=wkS586EdVp0 Link to Michael Mezalick’s YouTube channel: youtube.com/user/mezalick Link to CNCnutz (Peter Passuello’s) YouTube channel: youtube.com/c/cncnutz Link to the Vectric for the Absolute Beginner Playlist: youtube.com/playlist?list=PLLuYLaC3-QRNuVTej2P5emp1D4_Tm774p Link to the 3D Modeling for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QRPb0jNAfuB-xOlAUHWl1wkC Link to the V-Carving for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QROVf1Ua9BhGCzBty2FhZFmE ______________________________________________________________________________ Click the JOIN button to get access to perks: youtube.com/marklindsaycnc/join Here’s a link to a YouTube page that gives you more info about Channel Memberships, how to join, upgrade or downgrade your membership, or how to cancel your membership: youtube.com/intl/en_au/join Please remember that I am NOT a CNC expert, and I cannot help you troubleshoot your CNC router. Every CNC router, controller, and controller software is different. Your best option is to contact your CNC manufacturer’s Tech Support division, or look for a Support Forum or Support Community through their website. They are the people who know your machine best, while I would only be guessing. Link to Mark’s Other Channel. My second YouTube channel that’s dedicated to non-CNC related projects. youtube.com/channel/UCXMdT30E3tx7myvt9jGx-pA ______________________________________________________________________________ If you’d like to support my channel, help fund the shop/shed build, and help with the making of future videos, you can donate by using the link below: PayPal: paypal.me/MarkLindsayCNC ___________________________________________________________________________________ Get your Official Mark Lindsay CNC T-shirts and coffee mugs here: http://marklindsaycnc.com/index.php/product-category/logo-products marklindsaycnc.com is sponsored by Harneal Media – a website developing company that specializes in websites for the maker community. Find out more at: harnealmedia.com ___________________________________________________________________________________ For more info, or to configure an Avid CNC of your own, visit their website: avidcnc.com For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at: http://www.vectric.com For more tutorials on how to use Vectric Software, as well as some very cool projects, visit and subscribe to Vectric’s YouTube channel: youtube.com/user/Vectric Interested in hosting your own live streams? Check out StreamYard: streamyard.com/pal/5708919750000640 __________________________________________________________________________________ Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos. I appreciate your support! This video is for informational and entertainment purposes only. #Aspire #VCarvePro #Tutorial #Beginner Check out StreamYard: streamyard.com/pal/d/5708919750000640
Live Q&A #197 – Tiling Toolpaths Part 1 – Design, Toolpath, and Save G-code Mark Lindsay CNC 2023-06-26 | Click MORE! This week I will answer your questions about tiling toolpaths in Vectric software. I will also I'll answer your general CNC or Vectric Software question! So, join me at Noon Pacific Time, 3 pm Eastern Time for this week’s Live Q&A, and get your questions answered! Link to my video Tiling Toolpaths Part 1 – Design, Toolpath, and Save G-code: youtu.be/UDr2-ADDThs As usual, if you have any comments or questions, please put ‘em in the comment section below. Thanks for watching! Link to my video on Array Copy Toolpaths in Vectric Software: youtube.com/watch?v=6y-Fos9KItALink to Michael Mezalick's video on Parametric Designing: youtube.com/watch?v=aQm_w-fYD8s Link to Michael Mezalick’s YouTube channel: youtube.com/user/mezalick Link to CNCnutz (Peter Passuello’s) YouTube channel: youtube.com/c/cncnutz Click the JOIN button to get access to perks: youtube.com/marklindsaycnc/join Here’s a link to a YouTube page that gives you more info about Channel Memberships, how to join, upgrade or downgrade your membership, or how to cancel your membership: youtube.com/intl/en_au/join Please remember that I am NOT a CNC expert, and I cannot help you troubleshoot your CNC router. Every CNC router, controller, and controller software is different. Your best option is to contact your CNC manufacturer’s Tech Support division, or look for a Support Forum or Support Community through their website. They are the people who know your machine best, while I would only be guessing. Link to Mark’s Other Channel. My second YouTube channel that’s dedicated to non-CNC related projects. youtube.com/channel/UCXMdT30E3tx7myvt9jGx-pA ______________________________________________________________________________ If you’d like to support my channel, help fund the shop/shed build, and help with the making of future videos, you can donate by using the following link: PayPal: paypal.me/MarkLindsayCNC _______________________________________________________________________________ Link to the Vectric for the Absolute Beginner Playlist: youtube.com/playlist?list=PLLuYLaC3-QRNuVTej2P5emp1D4_Tm774p Link to the 3D Modeling for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QRPb0jNAfuB-xOlAUHWl1wkC Link to the V-Carving for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QROVf1Ua9BhGCzBty2FhZFmE ___________________________________________________________________________________ Get your Official Mark Lindsay CNC T-shirts and coffee mugs here: http://marklindsaycnc.com/index.php/product-category/logo-products ___________________________________________________________________________________ marklindsaycnc.com is sponsored by Harneal Media – a website developing company that specializes in websites for the maker community. Find out more at: harnealmedia.com For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at: http://www.vectric.com For more tutorials on how to use Vectric Software, as well as some very cool projects, visit and subscribe to Vectric’s YouTube channel: youtube.com/user/Vectric For more info, or to configure an Avid CNC of your own, visit their website: avidcnc.com __________________________________________________________________________________ Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos. I appreciate your support! This video is for informational and entertainment purposes only. #vectric #tiling #toolpath Check out StreamYard: streamyard.com/pal/d/5708919750000640
Tiling Toolpaths Part 1 – Design, Toolpath, and Save G-Code Mark Lindsay CNC 2023-06-25 | More down here ↓↓↓ Click MORE!In this video, I’ll introduce the subject of Tiling Toolpaths, using Vectric Aspire Version 11.5. I’ll first discuss what toolpaths actually is, and describe the reasons for tiling toolpaths. Then I’ll show you some things that need to be taken into consideration before tiling, such as mounting the material. I’ll then show you how I intend to mount my project, and discuss the complications that introduced to my overall design.I’ll show you the entire toolpath tiling process, step by step, and discuss important considerations along the way. I’ll then wrap things up by showing you the finished project, and save the G-code for each toolpath. As usual, if you have any comments or questions about anything I covered in this video, please join me for the Live Q&A, or put ‘em in the comment section below. On Sunday, June 25th, I’ll be hosting a LIVE Q&A session, where you can ask your questions pertaining to anything I’ve covered in this video. That Q&A starts at 3 pm Eastern time, Noon Pacific time. Hope to see you there!Here’s a link to the Live Q&A: youtube.com/live/Qo6el7ni0Co______________________________________________________________________________If you’d like to support my channel and help with the making of future videos, please consider becoming a channel member. If you’d rather make a one-time donation, you can do that by using the following link:PayPal: paypal.me/MarkLindsayCNCDirect link to more information on becoming a Channel Member: youtube.com/channel/UCMrMqMabXS5_cFcq5K9Ob-w/joinThank you very much!______________________________________________________________________________Link to the Vectric for the Absolute Beginner Playlist: youtube.com/playlist?list=PLLuYLaC3-QRNuVTej2P5emp1D4_Tm774pLink to the 3D Modeling for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QRPb0jNAfuB-xOlAUHWl1wkCLink to the V-Carving for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QROVf1Ua9BhGCzBty2FhZFmE______________________________________________________________________________Get your Official Mark Lindsay CNC T-shirts and coffee mugs here:http://marklindsaycnc.com/index.php/product-category/logo-productsmarklindsaycnc.com is sponsored by Harneal Media – a website developing company that specializes in websites for the maker community. Find out more at:harnealmedia.com______________________________________________________________________________For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at:http://www.vectric.comFor more info, or to configure an Avid CNC of your own, visit their website: avidcnc.com______________________________________________________________________________Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos. I appreciate your support! This video is for informational and entertainment purposes only.#vectric #tiling #toolpaths
Live Q&A #196 – Open Q&A Mark Lindsay CNC 2023-06-19 | Live Q&A #196 – Open Q&A IMPORTANT - PLEASE READ ↓↓↓ Click MORE! During this live stream, my ethernet router froze, then came back online. When you see me freeze up, just scrub ahead to the point that the live stream starts again. Sorry for the inconvenience. This week is an Open Live Q&A where I'll answer your general CNC or Vectric Software questions. So, join me at Noon Pacific Time, 3 pm Eastern Time for this week’s Live Q&A, and get your questions answered! As usual, if you have any comments or questions, please put ‘em in the comment section below. Thanks for watching! Link to the GoFundMe to help my friend Steve Nealon and his family in their time of crisis. Every contribution, large or small, will help them with his mother’s final costs. I thank you sincerely. gofund.me/3a25d602 Links to videos, Playlists, YouTube channels, products, and supplies as discussed in this video: Link to my Bitmap Tracing and Node Editing video Playlist: youtube.com/playlist?list=PLLuYLaC3-QRP32d8KMdDgh11yPaG8VfBb Link to Cadence Mfg and Design (downcut v-bits): cadencemfgdesign.comLink to CNC Zone Message Forum: cnczone.com/forums Link to Michael Mezalick’s YouTube channel: youtube.com/user/mezalick Link to CNCnutz (Peter Passuello’s) YouTube channel: youtube.com/c/cncnutz Link to the Vectric for the Absolute Beginner Playlist: youtube.com/playlist?list=PLLuYLaC3-QRNuVTej2P5emp1D4_Tm774p Link to the 3D Modeling for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QRPb0jNAfuB-xOlAUHWl1wkC Link to the V-Carving for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QROVf1Ua9BhGCzBty2FhZFmE ______________________________________________________________________________ Click the JOIN button to get access to perks: youtube.com/marklindsaycnc/join Here’s a link to a YouTube page that gives you more info about Channel Memberships, how to join, upgrade or downgrade your membership, or how to cancel your membership: youtube.com/intl/en_au/join Please remember that I am NOT a CNC expert, and I cannot help you troubleshoot your CNC router. Every CNC router, controller, and controller software is different. Your best option is to contact your CNC manufacturer’s Tech Support division, or look for a Support Forum or Support Community through their website. They are the people who know your machine best, while I would only be guessing. Link to Mark’s Other Channel. My second YouTube channel that’s dedicated to non-CNC related projects. youtube.com/channel/UCXMdT30E3tx7myvt9jGx-pA ______________________________________________________________________________ If you’d like to support my channel, help fund the shop/shed build, and help with the making of future videos, you can donate by using the link below: PayPal: paypal.me/MarkLindsayCNC ___________________________________________________________________________________ Get your Official Mark Lindsay CNC T-shirts and coffee mugs here: http://marklindsaycnc.com/index.php/product-category/logo-products marklindsaycnc.com is sponsored by Harneal Media – a website developing company that specializes in websites for the maker community. Find out more at: harnealmedia.com ___________________________________________________________________________________ For more info, or to configure an Avid CNC of your own, visit their website: avidcnc.com For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at: http://www.vectric.com For more tutorials on how to use Vectric Software, as well as some very cool projects, visit and subscribe to Vectric’s YouTube channel: youtube.com/user/Vectric Interested in hosting your own live streams? Check out StreamYard: streamyard.com/pal/5708919750000640 __________________________________________________________________________________ Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos. I appreciate your support! This video is for informational and entertainment purposes only. #Aspire #VCarvePro #Tutorial #Beginner Check out StreamYard: streamyard.com/pal/d/5708919750000640
Live Q&A #195 – Open Q&A – Tiling Toolpath Video Poll Results Mark Lindsay CNC 2023-06-12 | Live Q&A #195 – Open Q&A – Tiling Toolpath Video Poll Results More down here ↓↓↓ Click MORE! This week is an Open Live Q&A where I'll answer your general CNC or Vectric Software questions. I’ll also reveal the results of my Toolpath Tiling poll that I announced on Thursday, June 8th. So, join me at Noon Pacific Time, 3 pm Eastern Time for this week’s Live Q&A, and get your questions answered! As usual, if you have any comments or questions, please put ‘em in the comment section below. Thanks for watching! Link to the GoFundMe to help my friend Steve Nealon and his family in their time of crisis. Every contribution, large or small, will help them with his mother’s final costs. I thank you sincerely. gofund.me/3a25d602 Links to videos, Playlists, YouTube channels, products, and supplies as discussed in this video: Link to the Whiteside Square Corner Chisel: amzn.to/3WXHj29 Link to Flashback Express (Blueberry Software): flashbackrecorder.com/expressLink to Rob Shuster's YouTube channel (Rotary Axis): youtube.com/@sidewinderdrums Link to my video on Setting Z Zero to Material Surface or Machine Bed?: youtube.com/watch?v=ita1zpHLKsgLink to my video on Setting Z Zero to Material Surface AND Machine Bed in the Same File: youtube.com/watch?v=uIgbkE-r4AYLink to my video on Intro to Work and Fixture Offsets: youtube.com/watch?v=qo0h4Jdp-AQLink to my video on Creating Two Fixture Offsets in Mach4: youtube.com/watch?v=NpQ5FgwqaqkLink to my 2-Sided Machining video playlist (6 videos): youtube.com/playlist?list=PLLuYLaC3-QRPY1yU-D-QcUNUIcjzYkCdbLink to Michael Mezalick’s YouTube channel: youtube.com/user/mezalick Link to CNCnutz (Peter Passuello’s) YouTube channel: youtube.com/c/cncnutz Link to the Vectric for the Absolute Beginner Playlist: youtube.com/playlist?list=PLLuYLaC3-QRNuVTej2P5emp1D4_Tm774p Link to the 3D Modeling for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QRPb0jNAfuB-xOlAUHWl1wkC Link to the V-Carving for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QROVf1Ua9BhGCzBty2FhZFmE ______________________________________________________________________________ Click the JOIN button to get access to perks: youtube.com/marklindsaycnc/join Here’s a link to a YouTube page that gives you more info about Channel Memberships, how to join, upgrade or downgrade your membership, or how to cancel your membership: youtube.com/intl/en_au/join Please remember that I am NOT a CNC expert, and I cannot help you troubleshoot your CNC router. Every CNC router, controller, and controller software is different. Your best option is to contact your CNC manufacturer’s Tech Support division, or look for a Support Forum or Support Community through their website. They are the people who know your machine best, while I would only be guessing. Link to Mark’s Other Channel. My second YouTube channel that’s dedicated to non-CNC related projects. youtube.com/channel/UCXMdT30E3tx7myvt9jGx-pA ______________________________________________________________________________ If you’d like to support my channel, help fund the shop/shed build, and help with the making of future videos, you can donate by using the link below: PayPal: paypal.me/MarkLindsayCNC ___________________________________________________________________________________ Get your Official Mark Lindsay CNC T-shirts and coffee mugs here: http://marklindsaycnc.com/index.php/product-category/logo-products marklindsaycnc.com is sponsored by Harneal Media – a website developing company that specializes in websites for the maker community. Find out more at: harnealmedia.com ___________________________________________________________________________________ For more info, or to configure an Avid CNC of your own, visit their website: avidcnc.com For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at: http://www.vectric.com For more tutorials on how to use Vectric Software, as well as some very cool projects, visit and subscribe to Vectric’s YouTube channel: youtube.com/user/Vectric Interested in hosting your own live streams? Check out StreamYard: streamyard.com/pal/5708919750000640 __________________________________________________________________________________ Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos. I appreciate your support! This video is for informational and entertainment purposes only. #Aspire #VCarvePro #Tutorial #Beginner Check out StreamYard: streamyard.com/pal/d/5708919750000640
Vote in the Toolpath Tiling Poll On My Community Tab Mark Lindsay CNC 2023-06-08 | I'm going to split the Toolpath Tiling series into 2 parts. Part 1 will be drawing the design, calculating the toolpaths, and saving the G-Code. Part 2 will be actually machining and finishing the project. The question is, should I release Part 1 as a recorded and edited video, with a normal Live Q&A later that same day? Or should I do the design work, calculate the toolpaths, and save G-Code during a live stream on a Sunday? This poll will run until Sunday, June 11th at Noon Pacific time, 3 pm Eastern time, and the results will be announced on that day's Live Q&A. VOTE!!! youtube.com/@MarkLindsayCNC/community Check out StreamYard: streamyard.com/pal/d/5708919750000640
Live Q&A #194 – Open Q&A - Vectric Program Options Mark Lindsay CNC 2023-06-05 | Live Q&A #194 – Open Q&A More down here ↓↓↓ Click MORE! This week is an Open Live Q&A where I'll answer your general CNC or Vectric Software questions.We'll also have a discussion on some of the Program Options found in VCarve and Aspire software. So, join me at Noon Pacific Time, 3 pm Eastern Time for this week’s Live Q&A, and get your questions answered! As usual, if you have any comments or questions, please put ‘em in the comment section below. Thanks for watching! Link to the GoFundMe to help my friend Steve Nealon and his family in their time of crisis. Every contribution, large or small, will help them with his mother’s final costs. I thank you sincerely. gofund.me/3a25d602 Links to videos, Playlists, YouTube channels, products, and supplies as discussed in this video: Link to my video on Adding a Custom Background and Texture Images to VCarve and Aspire: youtube.com/watch?v=xOvrgjEvVbE Link to my video on Flashback Express Screen Capture Software: youtube.com/watch?v=IPvebOxP7I0For more information on, or to download a free copy of Flashback Express visit the Blueberry Software website at:flashbackrecorder.com/expressLink to Michael Mezalick’s YouTube channel: youtube.com/user/mezalick Link to CNCnutz (Peter Passuello’s) YouTube channel: youtube.com/c/cncnutz Link to the Vectric for the Absolute Beginner Playlist: youtube.com/playlist?list=PLLuYLaC3-QRNuVTej2P5emp1D4_Tm774p Link to the 3D Modeling for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QRPb0jNAfuB-xOlAUHWl1wkC Link to the V-Carving for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QROVf1Ua9BhGCzBty2FhZFmE ______________________________________________________________________________ Click the JOIN button to get access to perks: youtube.com/marklindsaycnc/join Here’s a link to a YouTube page that gives you more info about Channel Memberships, how to join, upgrade or downgrade your membership, or how to cancel your membership: youtube.com/intl/en_au/join Please remember that I am NOT a CNC expert, and I cannot help you troubleshoot your CNC router. Every CNC router, controller, and controller software is different. Your best option is to contact your CNC manufacturer’s Tech Support division, or look for a Support Forum or Support Community through their website. They are the people who know your machine best, while I would only be guessing. Link to Mark’s Other Channel. My second YouTube channel that’s dedicated to non-CNC related projects. youtube.com/channel/UCXMdT30E3tx7myvt9jGx-pA ______________________________________________________________________________ If you’d like to support my channel, help fund the shop/shed build, and help with the making of future videos, you can donate by using the link below: PayPal: paypal.me/MarkLindsayCNC ___________________________________________________________________________________ Get your Official Mark Lindsay CNC T-shirts and coffee mugs here: http://marklindsaycnc.com/index.php/product-category/logo-products marklindsaycnc.com is sponsored by Harneal Media – a website developing company that specializes in websites for the maker community. Find out more at: harnealmedia.com ___________________________________________________________________________________ For more info, or to configure an Avid CNC of your own, visit their website: avidcnc.com For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at: http://www.vectric.com For more tutorials on how to use Vectric Software, as well as some very cool projects, visit and subscribe to Vectric’s YouTube channel: youtube.com/user/Vectric Interested in hosting your own live streams? Check out StreamYard: streamyard.com/pal/5708919750000640 __________________________________________________________________________________ Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos. I appreciate your support! This video is for informational and entertainment purposes only. #Aspire #VCarvePro #Tutorial #Beginner Check out StreamYard: streamyard.com/pal/d/5708919750000640
Live Q&A #193 – Open Q&A – Discussion On Composite Nails Mark Lindsay CNC 2023-05-29 | Live Q&A #193 – Open Q&A – Discussion On Composite Nails More down here ↓↓↓ Click MORE! This week is an Open Live Q&A where I'll answer your general CNC or Vectric Software questions. I’ll also briefly talk about using composite nails for work holding. So, join me at Noon Pacific Time, 3 pm Eastern Time for this week’s Live Q&A, and get your questions answered! As usual, if you have any comments or questions, please put ‘em in the comment section below. Thanks for watching! Link to the GoFundMe to help my friend Steve Nealon and his family in their time of crisis. Every contribution, large or small, will help them with his mother’s final costs. I thank you sincerely. gofund.me/3a25d602 Links to videos, Playlists, YouTube channels, products, and supplies as discussed in this video: Link to the Omer B17P Composite Nailer I use: avidcnc.com/omer-b17p-composite-nailer-p-315.html Link to the Raptor Composite Nails that I use in a variety of sizes: avidcnc.com/raptor-composite-nails-p-316.html Link to Michael Mezalick’s YouTube channel: youtube.com/user/mezalick Link to CNCnutz (Peter Passuello’s) YouTube channel: youtube.com/c/cncnutz Link to the Vectric for the Absolute Beginner Playlist: youtube.com/playlist?list=PLLuYLaC3-QRNuVTej2P5emp1D4_Tm774p Link to the 3D Modeling for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QRPb0jNAfuB-xOlAUHWl1wkC Link to the V-Carving for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QROVf1Ua9BhGCzBty2FhZFmE ______________________________________________________________________________ Click the JOIN button to get access to perks: youtube.com/marklindsaycnc/join Here’s a link to a YouTube page that gives you more info about Channel Memberships, how to join, upgrade or downgrade your membership, or how to cancel your membership: youtube.com/intl/en_au/join Please remember that I am NOT a CNC expert, and I cannot help you troubleshoot your CNC router. Every CNC router, controller, and controller software is different. Your best option is to contact your CNC manufacturer’s Tech Support division, or look for a Support Forum or Support Community through their website. They are the people who know your machine best, while I would only be guessing. Link to Mark’s Other Channel. My second YouTube channel that’s dedicated to non-CNC related projects. youtube.com/channel/UCXMdT30E3tx7myvt9jGx-pA ______________________________________________________________________________ If you’d like to support my channel, help fund the shop/shed build, and help with the making of future videos, you can donate by using the link below: PayPal: paypal.me/MarkLindsayCNC ___________________________________________________________________________________ Get your Official Mark Lindsay CNC T-shirts and coffee mugs here: http://marklindsaycnc.com/index.php/product-category/logo-products marklindsaycnc.com is sponsored by Harneal Media – a website developing company that specializes in websites for the maker community. Find out more at: harnealmedia.com ___________________________________________________________________________________ For more info, or to configure an Avid CNC of your own, visit their website: avidcnc.com For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at: http://www.vectric.com For more tutorials on how to use Vectric Software, as well as some very cool projects, visit and subscribe to Vectric’s YouTube channel: youtube.com/user/Vectric Interested in hosting your own live streams? Check out StreamYard: streamyard.com/pal/5708919750000640 __________________________________________________________________________________ Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos. I appreciate your support! This video is for informational and entertainment purposes only. #Aspire #VCarvePro #Tutorial #Beginner Check out StreamYard: streamyard.com/pal/5708919750000640
Live Q&A #192 – Open Q&A Mark Lindsay CNC 2023-05-22 | Live Q&A #192 – Open Q&A More down here ↓↓↓ Click MORE! This week is an Open Live Q&A where I'll answer your general CNC or Vectric Software questions. So, join me at Noon Pacific Time, 3 pm Eastern Time for this week’s Live Q&A, and get your questions answered! As usual, if you have any comments or questions, please put ‘em in the comment section below. Thanks for watching! Link to the GoFundMe to help my friend Steve Nealon and his family in their time of crisis. Every contribution, large or small, will help them with his mother’s final costs. I thank you sincerely. gofund.me/3a25d602 Links to videos, Playlists, YouTube channels, products, and supplies as discussed in this video: Link to Chris Salomone’s video Why YouTube Furniture Sucks: youtube.com/watch?v=1DOIJosHkWw Link to Michael Mezalick’s YouTube channel: youtube.com/user/mezalick Link to CNCnutz (Peter Passuello’s) YouTube channel: youtube.com/c/cncnutz Link to the Vectric for the Absolute Beginner Playlist: youtube.com/playlist?list=PLLuYLaC3-QRNuVTej2P5emp1D4_Tm774p Link to the 3D Modeling for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QRPb0jNAfuB-xOlAUHWl1wkC Link to the V-Carving for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QROVf1Ua9BhGCzBty2FhZFmE ______________________________________________________________________________ Click the JOIN button to get access to perks: youtube.com/marklindsaycnc/join Here’s a link to a YouTube page that gives you more info about Channel Memberships, how to join, upgrade or downgrade your membership, or how to cancel your membership: youtube.com/intl/en_au/join Please remember that I am NOT a CNC expert, and I cannot help you troubleshoot your CNC router. Every CNC router, controller, and controller software is different. Your best option is to contact your CNC manufacturer’s Tech Support division, or look for a Support Forum or Support Community through their website. They are the people who know your machine best, while I would only be guessing. Link to Mark’s Other Channel. My second YouTube channel that’s dedicated to non-CNC related projects. youtube.com/channel/UCXMdT30E3tx7myvt9jGx-pA ______________________________________________________________________________ If you’d like to support my channel, help fund the shop/shed build, and help with the making of future videos, you can donate by using the link below: PayPal: paypal.me/MarkLindsayCNC ___________________________________________________________________________________ Get your Official Mark Lindsay CNC T-shirts and coffee mugs here: http://marklindsaycnc.com/index.php/product-category/logo-products marklindsaycnc.com is sponsored by Harneal Media – a website developing company that specializes in websites for the maker community. Find out more at: harnealmedia.com ___________________________________________________________________________________ For more info, or to configure an Avid CNC of your own, visit their website: avidcnc.com For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at: http://www.vectric.com For more tutorials on how to use Vectric Software, as well as some very cool projects, visit and subscribe to Vectric’s YouTube channel: youtube.com/user/Vectric Interested in hosting your own live streams? Check out StreamYard: streamyard.com/pal/5708919750000640 __________________________________________________________________________________ Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos. I appreciate your support! This video is for informational and entertainment purposes only. #Aspire #VCarvePro #Tutorial #Beginner Check out StreamYard: streamyard.com/pal/5708919750000640
Live Q&A #191 – Open Q&A Mark Lindsay CNC 2023-05-15 | More down here ↓↓↓ Click MORE! This week is an Open Live Q&A where I'll answer your general CNC or Vectric Software questions.So, join me at Noon Pacific Time, 3 pm Eastern Time for this week’s Live Q&A, and get your questions answered!As usual, if you have any comments or questions, please put ‘em in the comment section below.Thanks for watching! Link to the GoFundMe to help my friend Steve Nealon and his family in their time of crisis. Every contribution, large or small, will help them with his mother’s final costs. I thank you sincerely. gofund.me/3a25d602 Links to videos, Playlists, YouTube channels, products, and supplies as discussed in this video: Link to Chris Salomone’s video Why YouTube Furniture Sucks: youtube.com/watch?v=1DOIJosHkWw Link to Michael Mezalick’s YouTube channel: youtube.com/user/mezalick Link to CNCnutz (Peter Passuello’s) YouTube channel: youtube.com/c/cncnutz Link to the Vectric for the Absolute Beginner Playlist: youtube.com/playlist?list=PLLuYLaC3-QRNuVTej2P5emp1D4_Tm774p Link to the 3D Modeling for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QRPb0jNAfuB-xOlAUHWl1wkC Link to the V-Carving for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QROVf1Ua9BhGCzBty2FhZFmE ______________________________________________________________________________ Click the JOIN button to get access to perks: youtube.com/marklindsaycnc/join Here’s a link to a YouTube page that gives you more info about Channel Memberships, how to join, upgrade or downgrade your membership, or how to cancel your membership: youtube.com/intl/en_au/join Please remember that I am NOT a CNC expert, and I cannot help you troubleshoot your CNC router. Every CNC router, controller, and controller software is different. Your best option is to contact your CNC manufacturer’s Tech Support division, or look for a Support Forum or Support Community through their website. They are the people who know your machine best, while I would only be guessing. Link to Mark’s Other Channel. My second YouTube channel that’s dedicated to non-CNC related projects. youtube.com/channel/UCXMdT30E3tx7myvt9jGx-pA ______________________________________________________________________________ If you’d like to support my channel, help fund the shop/shed build, and help with the making of future videos, you can donate by using the link below: PayPal: paypal.me/MarkLindsayCNC ___________________________________________________________________________________ Get your Official Mark Lindsay CNC T-shirts and coffee mugs here: http://marklindsaycnc.com/index.php/product-category/logo-products marklindsaycnc.com is sponsored by Harneal Media – a website developing company that specializes in websites for the maker community. Find out more at: harnealmedia.com ___________________________________________________________________________________ For more info, or to configure an Avid CNC of your own, visit their website: avidcnc.com For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at: http://www.vectric.com For more tutorials on how to use Vectric Software, as well as some very cool projects, visit and subscribe to Vectric’s YouTube channel: youtube.com/user/Vectric Interested in hosting your own live streams? Check out StreamYard: streamyard.com/pal/5708919750000640 __________________________________________________________________________________ Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos. I appreciate your support! This video is for informational and entertainment purposes only. #Aspire #VCarvePro #Tutorial #Beginner Check out StreamYard: streamyard.com/pal/5708919750000640
Live Q&A #190 – Open Q&A – Announcing Major Channel Changes Mark Lindsay CNC 2023-05-08 | Live Q&A #190 – Open Q&A – Announcing Major Channel Changes More down here ↓↓↓ Click MORE! This week is an Open Live Q&A where I'll answer your general CNC or Vectric Software questions. I’ll also announce some major changes I’ll be making to my YouTube channel. So, join me at Noon Pacific Time, 3 pm Eastern Time for this week’s Live Q&A, and get your questions answered! As usual, if you have any comments or questions, please put ‘em in the comment section below. Thanks for watching! Links to videos, Playlists, YouTube channels, products, and supplies as discussed in this video: Link to Chris Salomone’s video Why YouTube Furniture Sucks: youtube.com/watch?v=1DOIJosHkWwLink to the book Making Authentic Craftsman Furniture: Instructions and Plans for 62 Projects by Gustav Stickley: amzn.to/3HMIUl5Link to Garret Fromme's YouTube channel CNC Routers, Beginners & Beyond: youtube.com/@IDCWoodcraft Link to Michael Mezalick’s YouTube channel: youtube.com/user/mezalick Link to CNCnutz (Peter Passuello’s) YouTube channel: youtube.com/c/cncnutz Link to the Vectric for the Absolute Beginner Playlist: youtube.com/playlist?list=PLLuYLaC3-QRNuVTej2P5emp1D4_Tm774p Link to the 3D Modeling for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QRPb0jNAfuB-xOlAUHWl1wkC Link to the V-Carving for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QROVf1Ua9BhGCzBty2FhZFmE ______________________________________________________________________________ Click the JOIN button to get access to perks: youtube.com/marklindsaycnc/join Here’s a link to a YouTube page that gives you more info about Channel Memberships, how to join, upgrade or downgrade your membership, or how to cancel your membership: youtube.com/intl/en_au/join Please remember that I am NOT a CNC expert, and I cannot help you troubleshoot your CNC router. Every CNC router, controller, and controller software is different. Your best option is to contact your CNC manufacturer’s Tech Support division, or look for a Support Forum or Support Community through their website. They are the people who know your machine best, while I would only be guessing. Link to Mark’s Other Channel. My second YouTube channel that’s dedicated to non-CNC related projects. youtube.com/channel/UCXMdT30E3tx7myvt9jGx-pA ______________________________________________________________________________ If you’d like to support my channel, help fund the shop/shed build, and help with the making of future videos, you can donate by using the link below: PayPal: paypal.me/MarkLindsayCNC ___________________________________________________________________________________ Get your Official Mark Lindsay CNC T-shirts and coffee mugs here: http://marklindsaycnc.com/index.php/product-category/logo-products marklindsaycnc.com is sponsored by Harneal Media – a website developing company that specializes in websites for the maker community. Find out more at: harnealmedia.com ___________________________________________________________________________________ For more info, or to configure an Avid CNC of your own, visit their website: avidcnc.com For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at: http://www.vectric.com For more tutorials on how to use Vectric Software, as well as some very cool projects, visit and subscribe to Vectric’s YouTube channel: youtube.com/user/Vectric Interested in hosting your own live streams? Check out StreamYard: streamyard.com/pal/5708919750000640 __________________________________________________________________________________ Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos. I appreciate your support! This video is for informational and entertainment purposes only. #Aspire #VCarvePro #Tutorial #Beginner Check out StreamYard: streamyard.com/pal/5708919750000640
Live Q&A #189 – Open Q&A - Sourcing Materials Mark Lindsay CNC 2023-05-01 | Live Q&A #189 – Open Q&A More down here ↓↓↓ Click MORE! This week is an Open Live Q&A where I'll answer your general CNC or Vectric Software questions. So, join me at Noon Pacific Time, 3 pm Eastern Time for this week’s Live Q&A, and get your questions answered! As usual, if you have any comments or questions, please put ‘em in the comment section below. Thanks for watching! Links to videos, Playlists, YouTube channels, products, and supplies as discussed in this video: Link to Stephan Forseilles' YouTube channel (Wood Inlays): youtube.com/@stephanforseilles Link to Stephen's video Deep inlays V-Carving detailed tutorial with Vectric VCarve: youtube.com/watch?v=RY0zLv3wcycLink to Wooden Visions - Charles Dearing's Scroll Saw Pattern website: woodenvisions.comLink to my video on Using Scroll Saw Patterns for V-Carving in @vectric Software: youtube.com/watch?v=j-IcrEkbxQQLink to my video on Create a Custom @vectric Clipart Library: youtube.com/watch?v=qePoJThpSKcLink to my video on Ramps and Leads: youtube.com/watch?v=qndxWC--rO8Link to my video on Ramps, Leads, and Separate Last Pass: youtube.com/watch?v=lI4ZM2xMabs Link to Michael Mezalick’s YouTube channel: youtube.com/user/mezalick Link to CNCnutz (Peter Passuello’s) YouTube channel: youtube.com/c/cncnutz Link to the Vectric for the Absolute Beginner Playlist: youtube.com/playlist?list=PLLuYLaC3-QRNuVTej2P5emp1D4_Tm774p Link to the 3D Modeling for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QRPb0jNAfuB-xOlAUHWl1wkC Link to the V-Carving for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QROVf1Ua9BhGCzBty2FhZFmE ______________________________________________________________________________ Click the JOIN button to get access to perks: youtube.com/marklindsaycnc/join Here’s a link to a YouTube page that gives you more info about Channel Memberships, how to join, upgrade or downgrade your membership, or how to cancel your membership: youtube.com/intl/en_au/join Please remember that I am NOT a CNC expert, and I cannot help you troubleshoot your CNC router. Every CNC router, controller, and controller software is different. Your best option is to contact your CNC manufacturer’s Tech Support division, or look for a Support Forum or Support Community through their website. They are the people who know your machine best, while I would only be guessing. Link to Mark’s Other Channel. My second YouTube channel that’s dedicated to non-CNC related projects. youtube.com/channel/UCXMdT30E3tx7myvt9jGx-pA ______________________________________________________________________________ If you’d like to support my channel, help fund the shop/shed build, and help with the making of future videos, you can donate by using the link below: PayPal: paypal.me/MarkLindsayCNC ___________________________________________________________________________________ Get your Official Mark Lindsay CNC T-shirts and coffee mugs here: http://marklindsaycnc.com/index.php/product-category/logo-products marklindsaycnc.com is sponsored by Harneal Media – a website developing company that specializes in websites for the maker community. Find out more at: harnealmedia.com ___________________________________________________________________________________ For more info, or to configure an Avid CNC of your own, visit their website: avidcnc.com For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at: http://www.vectric.com For more tutorials on how to use Vectric Software, as well as some very cool projects, visit and subscribe to Vectric’s YouTube channel: youtube.com/user/Vectric Interested in hosting your own live streams? Check out StreamYard: streamyard.com/pal/5708919750000640 __________________________________________________________________________________ Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos. I appreciate your support! This video is for informational and entertainment purposes only. #Aspire #VCarvePro #Tutorial #Beginner Check out StreamYard: streamyard.com/pal/5708919750000640
Live Q&A #188 – Z Zero Position - Machine Bed AND Material Surface Mark Lindsay CNC 2023-04-24 | Click MORE! This week I will answer your questions about setting Z zero position to the machine bed AND the material surface in Vectric Aspire, in a single file! I will also I'll answer your general CNC or Vectric Software question! So, join me at Noon Pacific Time, 3 pm Eastern Time for this week’s Live Q&A, and get your questions answered! Link to my video Z Zero Position - Machine Bed AND Material Surface: youtu.be/uIgbkE-r4AY As usual, if you have any comments or questions, please put ‘em in the comment section below. Thanks for watching! Link to Wood if I Could Scroll Saw Live Stream "Daily Scrolls" : youtube.com/watch?v=A4XXMBV5OCU Link to my video Create a 3D Barn Star in Vectric Aspire: youtube.com/watch?v=3lvtm8iw0eY Link to my video Introduction to Work and Fixture Offsets: youtube.com/watch?v=qo0h4Jdp-AQ Link to my video Creating Two Fixture Offsets in Mach4: youtube.com/watch?v=NpQ5Fgwqaqk Link to Michael Mezalick’s YouTube channel: youtube.com/user/mezalick Link to CNCnutz (Peter Passuello’s) YouTube channel: youtube.com/c/cncnutz Click the JOIN button to get access to perks: youtube.com/marklindsaycnc/join Here’s a link to a YouTube page that gives you more info about Channel Memberships, how to join, upgrade or downgrade your membership, or how to cancel your membership: youtube.com/intl/en_au/join Please remember that I am NOT a CNC expert, and I cannot help you troubleshoot your CNC router. Every CNC router, controller, and controller software is different. Your best option is to contact your CNC manufacturer’s Tech Support division, or look for a Support Forum or Support Community through their website. They are the people who know your machine best, while I would only be guessing. Link to Mark’s Other Channel. My second YouTube channel that’s dedicated to non-CNC related projects. youtube.com/channel/UCXMdT30E3tx7myvt9jGx-pA ______________________________________________________________________________ If you’d like to support my channel, help fund the shop/shed build, and help with the making of future videos, you can donate by using the following link: PayPal: paypal.me/MarkLindsayCNC _______________________________________________________________________________ Link to the Vectric for the Absolute Beginner Playlist: youtube.com/playlist?list=PLLuYLaC3-QRNuVTej2P5emp1D4_Tm774p Link to the 3D Modeling for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QRPb0jNAfuB-xOlAUHWl1wkC Link to the V-Carving for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QROVf1Ua9BhGCzBty2FhZFmE ___________________________________________________________________________________ Get your Official Mark Lindsay CNC T-shirts and coffee mugs here: http://marklindsaycnc.com/index.php/product-category/logo-products ___________________________________________________________________________________ marklindsaycnc.com is sponsored by Harneal Media – a website developing company that specializes in websites for the maker community. Find out more at: harnealmedia.com For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at: http://www.vectric.com For more tutorials on how to use Vectric Software, as well as some very cool projects, visit and subscribe to Vectric’s YouTube channel: youtube.com/user/Vectric For more info, or to configure an Avid CNC of your own, visit their website: avidcnc.com __________________________________________________________________________________ Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos. I appreciate your support! This video is for informational and entertainment purposes only. #avidcnc #vectric #cncrouter Check out StreamYard: streamyard.com/pal/5708919750000640
Z Zero Position - Machine Bed AND Material Surface Mark Lindsay CNC 2023-04-23 | More down here ↓↓↓ Click MORE!In this video, I’ll show you how I go about setting the Z zero position to the material surface and to the machine bed in a single file, using Vectric Aspire Version 11.5. Then I’ll show you one way of doing it in Vectric Aspire Version 10.0. First I’ll show you how I created the file in Version 11.5, using Sheets. One sheet with the Z zero position on the machine bed, and the other with it on the material surface. I’ll then show you how I calculated the toolpaths for each of the sheets. Then I’ll show you how I created the same files in Version 10.0, using 2 separate files.I’ll show you the entire carving process, and discuss important considerations along the way. I’ll then wrap things up by showing you the finished stars, and give you my thoughts on when each Z zero position is warranted. As usual, if you have any comments or questions about anything I covered in this video, please join me for the Live Q&A, or put ‘em in the comment section below. On Sunday, April 23rd, I’ll be hosting a LIVE Q&A session, where you can ask your questions pertaining to anything I’ve covered in this video. That Q&A starts at 3 pm Eastern time, Noon Pacific time. Hope to see you there!Here’s a link to the Live Q&A: youtube.com/live/kBWiixJSivgLink to my video Create a 3D Barn Star in Vectric Aspire: youtube.com/watch?v=3lvtm8iw0eYLink to my video Introduction to Work and Fixture Offsets: youtube.com/watch?v=qo0h4Jdp-AQLink to my video Creating Two Fixture Offsets in Mach4: youtube.com/watch?v=NpQ5FgwqaqkLinks to tools and supplies used in this video:Bosch 85911M 1/4 Inch Solid Carbide 2-Flute Upcut Spiral Bit: amzn.to/2QWqeDXAmana 46415-K Spektra Coated Downcut Spiral bit: amzn.to/3NMveb7Amana 46286-S 1/8 inch Diameter Tapered Ball Nose Bit: amzn.to/43RS5Ka2P10 Medium CA Glue: amzn.to/3atUOzi2P10 Activator Spray: amzn.to/3oTP2iM______________________________________________________________________________If you’d like to support my channel and help with the making of future videos, please consider becoming a channel member. If you’d rather make a one-time donation, you can do that by using the following link:PayPal: paypal.me/MarkLindsayCNCDirect link to more information on becoming a Channel Member: youtube.com/channel/UCMrMqMabXS5_cFcq5K9Ob-w/joinThank you very much!______________________________________________________________________________Link to the Vectric for the Absolute Beginner Playlist: youtube.com/playlist?list=PLLuYLaC3-QRNuVTej2P5emp1D4_Tm774pLink to the 3D Modeling for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QRPb0jNAfuB-xOlAUHWl1wkCLink to the V-Carving for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QROVf1Ua9BhGCzBty2FhZFmE______________________________________________________________________________Get your Official Mark Lindsay CNC T-shirts and coffee mugs here:http://marklindsaycnc.com/index.php/product-category/logo-productsmarklindsaycnc.com is sponsored by Harneal Media – a website developing company that specializes in websites for the maker community. Find out more at:harnealmedia.com______________________________________________________________________________For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at:http://www.vectric.comFor more info, or to configure an Avid CNC of your own, visit their website: avidcnc.com______________________________________________________________________________Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos. I appreciate your support! This video is for informational and entertainment purposes only.#avidcnc #vectric #cncrouter
Live Q&A #187 – Open Q&A Mark Lindsay CNC 2023-04-17 | Live Q&A #187 – Open Q&A More down here ↓↓↓ Click MORE! This week is an Open Live Q&A where I'll answer your general CNC or Vectric Software questions. So, join me at Noon Pacific Time, 3 pm Eastern Time for this week’s Live Q&A, and get your questions answered! As usual, if you have any comments or questions, please put ‘em in the comment section below. Thanks for watching! Links to videos, Playlists, YouTube channels, products, and supplies as discussed in this video: Link to my video on Rest Machining: youtube.com/watch?v=G0ojz7ytOzc Link to Wood if I Could - John C's Christmas Pyramid Pattern From Volker Arnold live stream: youtube.com/watch?v=u8MfVv9tnk4&ab_channel=WoodifICould-JohnC Link to Michael Mezalick’s YouTube channel: youtube.com/user/mezalick Link to CNCnutz (Peter Passuello’s) YouTube channel: youtube.com/c/cncnutz Link to the Vectric for the Absolute Beginner Playlist: youtube.com/playlist?list=PLLuYLaC3-QRNuVTej2P5emp1D4_Tm774p Link to the 3D Modeling for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QRPb0jNAfuB-xOlAUHWl1wkC Link to the V-Carving for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QROVf1Ua9BhGCzBty2FhZFmE ______________________________________________________________________________ Click the JOIN button to get access to perks: youtube.com/marklindsaycnc/join Here’s a link to a YouTube page that gives you more info about Channel Memberships, how to join, upgrade or downgrade your membership, or how to cancel your membership: youtube.com/intl/en_au/join Please remember that I am NOT a CNC expert, and I cannot help you troubleshoot your CNC router. Every CNC router, controller, and controller software is different. Your best option is to contact your CNC manufacturer’s Tech Support division, or look for a Support Forum or Support Community through their website. They are the people who know your machine best, while I would only be guessing. Link to Mark’s Other Channel. My second YouTube channel that’s dedicated to non-CNC related projects. youtube.com/channel/UCXMdT30E3tx7myvt9jGx-pA ______________________________________________________________________________ If you’d like to support my channel, help fund the shop/shed build, and help with the making of future videos, you can donate by using the link below: PayPal: paypal.me/MarkLindsayCNC ___________________________________________________________________________________ Get your Official Mark Lindsay CNC T-shirts and coffee mugs here: http://marklindsaycnc.com/index.php/product-category/logo-products marklindsaycnc.com is sponsored by Harneal Media – a website developing company that specializes in websites for the maker community. Find out more at: harnealmedia.com ___________________________________________________________________________________ For more info, or to configure an Avid CNC of your own, visit their website: avidcnc.com For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at: http://www.vectric.com For more tutorials on how to use Vectric Software, as well as some very cool projects, visit and subscribe to Vectric’s YouTube channel: youtube.com/user/Vectric Interested in hosting your own live streams? Check out StreamYard: streamyard.com/pal/5708919750000640 __________________________________________________________________________________ Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos. I appreciate your support! This video is for informational and entertainment purposes only. #Aspire #VCarvePro #Tutorial #Beginner Check out StreamYard: streamyard.com/pal/5708919750000640
Live Q&A #186 – Z Zero Position - Machine Bed or Material Surface? Mark Lindsay CNC 2023-04-09 | Live Q&A #186 – Z Zero Position - Machine Bed or Material Surface? Click MORE! This week I will answer your questions about setting Z zero position to the machine bed vs the material surface in Vectric Aspire! I will also I'll answer your general CNC or Vectric Software question! So, join me at Noon Pacific Time, 3 pm Eastern Time for this week’s Live Q&A, and get your questions answered! Link to my video Z Zero Position - Machine Bed or Material Surface?: youtu.be/ita1zpHLKsg As usual, if you have any comments or questions, please put ‘em in the comment section below. Thanks for watching!Link to the Fulton Panel Max clam system I have, but HAVE NOT used yet: amzn.to/3KlJg2A A Public Domain collection of design sources. Check all 3 pages, as there are some very unique and interesting sources of design ideas and materials: publicdomainreview.org/collections/all/theme/design-and-typography/1 Link to my video Create a 3D Barn Star in Vectric Aspire: youtube.com/watch?v=3lvtm8iw0eY Link to my video Introduction to Work and Fixture Offsets: youtube.com/watch?v=qo0h4Jdp-AQ Link to my video Creating Two Fixture Offsets in Mach4: youtube.com/watch?v=NpQ5Fgwqaqk Link to Michael Mezalick’s YouTube channel: youtube.com/user/mezalick Link to CNCnutz (Peter Passuello’s) YouTube channel: youtube.com/c/cncnutz Click the JOIN button to get access to perks: youtube.com/marklindsaycnc/join Here’s a link to a YouTube page that gives you more info about Channel Memberships, how to join, upgrade or downgrade your membership, or how to cancel your membership: youtube.com/intl/en_au/join Please remember that I am NOT a CNC expert, and I cannot help you troubleshoot your CNC router. Every CNC router, controller, and controller software is different. Your best option is to contact your CNC manufacturer’s Tech Support division, or look for a Support Forum or Support Community through their website. They are the people who know your machine best, while I would only be guessing. Link to Mark’s Other Channel. My second YouTube channel that’s dedicated to non-CNC related projects. youtube.com/channel/UCXMdT30E3tx7myvt9jGx-pA ______________________________________________________________________________ If you’d like to support my channel, help fund the shop/shed build, and help with the making of future videos, you can donate by using the following link: PayPal: paypal.me/MarkLindsayCNC _______________________________________________________________________________ Link to the Vectric for the Absolute Beginner Playlist: youtube.com/playlist?list=PLLuYLaC3-QRNuVTej2P5emp1D4_Tm774p Link to the 3D Modeling for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QRPb0jNAfuB-xOlAUHWl1wkC Link to the V-Carving for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QROVf1Ua9BhGCzBty2FhZFmE ___________________________________________________________________________________ Get your Official Mark Lindsay CNC T-shirts and coffee mugs here: http://marklindsaycnc.com/index.php/product-category/logo-products ___________________________________________________________________________________ marklindsaycnc.com is sponsored by Harneal Media – a website developing company that specializes in websites for the maker community. Find out more at: harnealmedia.com For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at: http://www.vectric.com For more tutorials on how to use Vectric Software, as well as some very cool projects, visit and subscribe to Vectric’s YouTube channel: youtube.com/user/Vectric For more info, or to configure an Avid CNC of your own, visit their website: avidcnc.comI proudly use Streamyard to create these Live Streams. Check it out for yourself! streamyard.com/pal/c/5708919750000640 __________________________________________________________________________________ Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos. I appreciate your support! This video is for informational and entertainment purposes only. #avidcnc #4848Pro #cncrouter Check out StreamYard: streamyard.com/pal/5708919750000640
Z Zero Position - Machine Bed or Material Surface? Mark Lindsay CNC 2023-04-09 | More down here ↓↓↓ Click MORE!In this video, I’ll finally address a question I get quite often. That is, the difference between setting the Z zero position to the material surface and setting it to the machine bed. First I’ll show you the file I created in Vectric Aspire to 3D carve two barn stars – one with the Z zero position on the machine bed, and the other with it on the material surface. I’ll then briefly show you the toolpaths for each of the stars. Then I’ll show you how I carved each one of them out of a piece of material, and the issues I had along the way. Then I’ll tell you what my primary issue was, and how I corrected it.Finally, I’ll summarize the entire process and discuss when each setup is appropriate, or not, as the case may be.As usual, if you have any comments or questions about anything I covered in this video, please join me for the Live Q&A, or put ‘em in the comment section below. On Sunday, April 9th, I’ll be hosting a LIVE Q&A session, where you can ask your questions pertaining to anything I’ve covered in this video. That Q&A starts at 3 pm Eastern time, Noon Pacific time. Hope to see you there!Here’s a link to the Live Q&A: youtube.com/live/4Yn701biSWULink to my video Create a 3D Barn Star in Vectric Aspire: youtube.com/watch?v=3lvtm8iw0eYLink to my video Introduction to Work and Fixture Offsets: youtube.com/watch?v=qo0h4Jdp-AQLink to my video Creating Two Fixture Offsets in Mach4: youtube.com/watch?v=NpQ5Fgwqaqk______________________________________________________________________________If you’d like to support my channel and help with the making of future videos, please consider becoming a channel member. If you’d rather make a one-time donation, you can do that by using the following link:PayPal: paypal.me/MarkLindsayCNCDirect link to more information on becoming a Channel Member: youtube.com/channel/UCMrMqMabXS5_cFcq5K9Ob-w/joinThank you very much!______________________________________________________________________________Link to the Vectric for the Absolute Beginner Playlist: youtube.com/playlist?list=PLLuYLaC3-QRNuVTej2P5emp1D4_Tm774pLink to the 3D Modeling for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QRPb0jNAfuB-xOlAUHWl1wkCLink to the V-Carving for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QROVf1Ua9BhGCzBty2FhZFmE______________________________________________________________________________Get your Official Mark Lindsay CNC T-shirts and coffee mugs here:http://marklindsaycnc.com/index.php/product-category/logo-productsmarklindsaycnc.com is sponsored by Harneal Media – a website developing company that specializes in websites for the maker community. Find out more at:harnealmedia.com______________________________________________________________________________For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at:http://www.vectric.comFor more info, or to configure an Avid CNC of your own, visit their website: avidcnc.comI proudly use Streamyard to create these Live Streams. Check it out for yourself! streamyard.com/pal/c/5708919750000640______________________________________________________________________________Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos. I appreciate your support! This video is for informational and entertainment purposes only.#avidcnc #Aspire #cncrouter
Live Q&A #185 – Open Q&A Mark Lindsay CNC 2023-04-02 | Live Q&A #185 – Open Q&A More down here ↓↓↓ Click MORE! Once again real life got in the way, and as a result, I did not have time to get an edited video posted this week. So this week is an Open Live Q&A where I'll answer your general CNC or Vectric Software questions. So, join me at Noon Pacific Time, 3 pm Eastern Time for this week’s Live Q&A, and get your questions answered! As usual, if you have any comments or questions, please put ‘em in the comment section below. Thanks for watching! Links to videos, Playlists, YouTube channels, products, and supplies as discussed in this video: Link to Dennis Van Hoof's YouTube Channel: youtube.com/@dennisvanhoof9958/videosLink to Dennis Van Hoof's video on Lock and Key Technique for 4-Sided CNC - Carving a Greek Column: youtube.com/watch?v=jfcQBFt0ZSALink to Stephan Forseilles' YouTube channel: youtube.com/@stephanforseilles/videos Link to Michael Mezalick’s YouTube channel: youtube.com/user/mezalick Link to CNCnutz (Peter Passuello’s) YouTube channel: youtube.com/c/cncnutz Link to the Vectric for the Absolute Beginner Playlist: youtube.com/playlist?list=PLLuYLaC3-QRNuVTej2P5emp1D4_Tm774p Link to the 3D Modeling for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QRPb0jNAfuB-xOlAUHWl1wkC Link to the V-Carving for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QROVf1Ua9BhGCzBty2FhZFmE ______________________________________________________________________________ Click the JOIN button to get access to perks: youtube.com/marklindsaycnc/join Here’s a link to a YouTube page that gives you more info about Channel Memberships, how to join, upgrade or downgrade your membership, or how to cancel your membership: youtube.com/intl/en_au/join Please remember that I am NOT a CNC expert, and I cannot help you troubleshoot your CNC router. Every CNC router, controller, and controller software is different. Your best option is to contact your CNC manufacturer’s Tech Support division, or look for a Support Forum or Support Community through their website. They are the people who know your machine best, while I would only be guessing. Link to Mark’s Other Channel. My second YouTube channel that’s dedicated to non-CNC related projects. youtube.com/channel/UCXMdT30E3tx7myvt9jGx-pA ______________________________________________________________________________ If you’d like to support my channel, help fund the shop/shed build, and help with the making of future videos, you can donate by using the link below: PayPal: paypal.me/MarkLindsayCNC ___________________________________________________________________________________ Get your Official Mark Lindsay CNC T-shirts and coffee mugs here: http://marklindsaycnc.com/index.php/product-category/logo-products marklindsaycnc.com is sponsored by Harneal Media – a website developing company that specializes in websites for the maker community. Find out more at: harnealmedia.com ___________________________________________________________________________________ For more info, or to configure an Avid CNC of your own, visit their website: avidcnc.com For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at: http://www.vectric.com For more tutorials on how to use Vectric Software, as well as some very cool projects, visit and subscribe to Vectric’s YouTube channel: youtube.com/user/VectricInterested in hosting your own live streams? Check out StreamYard: streamyard.com/pal/5708919750000640 __________________________________________________________________________________ Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos. I appreciate your support! This video is for informational and entertainment purposes only. #Aspire #VCarvePro #Tutorial #Beginner
Live Q&A #184 – Open Q&A Mark Lindsay CNC 2023-03-26 | Live Q&A #184 – Open Q&A More down here ↓↓↓ Click MORE! This week is an Open Live Q&A where I'll answer your general CNC or Vectric Software questions. So, join me at Noon Pacific Time, 3 pm Eastern Time for this week’s Live Q&A, and get your questions answered! As usual, if you have any comments or questions, please put ‘em in the comment section below. Thanks for watching! Links to videos, Playlists, YouTube channels, products, and supplies as discussed in this video: Link to Bourbon Moth Woodworking's video I Tried To Burn Down My Shop: youtube.com/watch?v=3Gqi2cNCKQY Link to Michael Mezalick’s YouTube channel: youtube.com/user/mezalick Link to CNCnutz (Peter Passuello’s) YouTube channel: youtube.com/c/cncnutz Click the JOIN button to get access to perks: youtube.com/marklindsaycnc/join Here’s a link to a YouTube page that gives you more info about Channel Memberships, how to join, upgrade or downgrade your membership, or how to cancel your membership: youtube.com/intl/en_au/join Please remember that I am NOT a CNC expert, and I cannot help you troubleshoot your CNC router. Every CNC router, controller, and controller software is different. Your best option is to contact your CNC manufacturer’s Tech Support division, or look for a Support Forum or Support Community through their website. They are the people who know your machine best, while I would only be guessing. Link to Mark’s Other Channel. My second YouTube channel that’s dedicated to non-CNC related projects. youtube.com/channel/UCXMdT30E3tx7myvt9jGx-pA ______________________________________________________________________________ If you’d like to support my channel, help fund the shop/shed build, and help with the making of future videos, you can donate by using the link below: PayPal: paypal.me/MarkLindsayCNC Link to the Vectric for the Absolute Beginner Playlist: youtube.com/playlist?list=PLLuYLaC3-QRNuVTej2P5emp1D4_Tm774p Link to the 3D Modeling for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QRPb0jNAfuB-xOlAUHWl1wkC Link to the V-Carving for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QROVf1Ua9BhGCzBty2FhZFmE ___________________________________________________________________________________ Get your Official Mark Lindsay CNC T-shirts and coffee mugs here: http://marklindsaycnc.com/index.php/product-category/logo-products marklindsaycnc.com is sponsored by Harneal Media – a website developing company that specializes in websites for the maker community. Find out more at: harnealmedia.com ___________________________________________________________________________________ For more info, or to configure an Avid CNC of your own, visit their website: avidcnc.com For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at: http://www.vectric.com For more tutorials on how to use Vectric Software, as well as some very cool projects, visit and subscribe to Vectric’s YouTube channel: youtube.com/user/Vectric __________________________________________________________________________________ Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos. I appreciate your support! This video is for informational and entertainment purposes only. #Aspire #VCarvePro #Tutorial #Beginner Check out StreamYard: streamyard.com/pal/5708919750000640
Live Q&A #183 – Creating Two Fixture Offsets in Mach4 Mark Lindsay CNC 2023-03-19 | Live Q&A #183 – Creating Two Fixture Offsets in Mach4 Click MORE! This week I will answer your questions about Adding Two Fixture Offsets to Mach4 to use on my Avid CNC 4848 Pro router! I will also I'll answer your general CNC or Vectric Software question! So, join me at Noon Pacific Time, 3 pm Eastern Time for this week’s Live Q&A, and get your questions answered! Link to my video Creating Two Fixture Offsets in Mach4: youtu.be/NpQ5Fgwqaqk As usual, if you have any comments or questions, please put ‘em in the comment section below. Thanks for watching! Link to my video Introduction to Work Offsets and Fixture Offsets: youtu.be/qo0h4Jdp-AQ Link to my video on Repairing my Avid 4848 Pro CNC Router Spoilboard: youtu.be/_vBxGxMH_NcLink to @rockymountainplc video on How to use GRBL / G Code G10 and G54 offsets commands with Ready Motion:youtube.com/watch?v=38DF-Oy-Au8 Link to Corian Fabrication Manual. Click the link below, then click the Technical Literature link. Scroll down to Fabrication Manual, and download the ZIP file. After extracting the ZIP file, look at Corian Solid Surface Tools and Accessories for tool info.corian.com/-documentation-Link to my video on 2-Sides Machining Part 1 - The Design: youtube.com/watch?v=qsTdCdelBkgLink to my video on 2-Sided Machining Part 2 - Cutting The Project: youtube.com/watch?v=UhIaC-ApL9MLink to Michael Mezalick’s YouTube channel: youtube.com/user/mezalick Link to CNCnutz (Peter Passuello’s) YouTube channel: youtube.com/c/cncnutz Click the JOIN button to get access to perks: youtube.com/marklindsaycnc/join Here’s a link to a YouTube page that gives you more info about Channel Memberships, how to join, upgrade or downgrade your membership, or how to cancel your membership: youtube.com/intl/en_au/join Please remember that I am NOT a CNC expert, and I cannot help you troubleshoot your CNC router. Every CNC router, controller, and controller software is different. Your best option is to contact your CNC manufacturer’s Tech Support division, or look for a Support Forum or Support Community through their website. They are the people who know your machine best, while I would only be guessing. Link to Mark’s Other Channel. My second YouTube channel that’s dedicated to non-CNC related projects. youtube.com/channel/UCXMdT30E3tx7myvt9jGx-pA ______________________________________________________________________________ If you’d like to support my channel, help fund the shop/shed build, and help with the making of future videos, you can donate by using the following link: PayPal: paypal.me/MarkLindsayCNC _______________________________________________________________________________ Link to the Vectric for the Absolute Beginner Playlist: youtube.com/playlist?list=PLLuYLaC3-QRNuVTej2P5emp1D4_Tm774p Link to the 3D Modeling for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QRPb0jNAfuB-xOlAUHWl1wkC Link to the V-Carving for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QROVf1Ua9BhGCzBty2FhZFmE ___________________________________________________________________________________ Get your Official Mark Lindsay CNC T-shirts and coffee mugs here: http://marklindsaycnc.com/index.php/product-category/logo-products ___________________________________________________________________________________ marklindsaycnc.com is sponsored by Harneal Media – a website developing company that specializes in websites for the maker community. Find out more at: harnealmedia.com For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at: http://www.vectric.com For more tutorials on how to use Vectric Software, as well as some very cool projects, visit and subscribe to Vectric’s YouTube channel: youtube.com/user/Vectric For more info, or to configure an Avid CNC of your own, visit their website: avidcnc.com __________________________________________________________________________________ Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos. I appreciate your support! This video is for informational and entertainment purposes only. #avidcnc #4848Pro #cncrouter
Creating Two Fixture Offsets in Mach4 Mark Lindsay CNC 2023-03-19 | Creating Two Fixture Offsets in Mach4More down here ↓↓↓ Click MORE!In this video, I’ll show you how I made two work positions on the spoilboard of my Avid CNC 4848 Pro CNC Router, then created fixture offsets in Mach4 for those positions. First I’ll show you the file I created in Vectric Aspire to drill dowel locations into the surface of the spoilboard. I’ll then show you how I set up and drilled those holes. Then I’ll show you how I used precision ground dowels in those holes to accurately mount a piece of material. And then I’ll show you how I created a G55 and a G56 Fixture Offset in Mach4 to be able to repeatably use those fixture locations.Finally, I’ll summarize the entire process and discuss why a person would want such a setup.As usual, if you have any comments or questions about anything I covered in this video, please join me for the Live Q&A, or put ‘em in the comment section below. On Sunday, March 19th, I’ll be hosting a LIVE Q&A session, where you can ask your questions pertaining to anything I’ve covered in this video. That Q&A starts at 3 pm Eastern time, Noon Pacific time. Hope to see you there!Here’s a link to the Live Q&A: youtube.com/live/lljMYAx0BIULink to my video Introduction to Work Offsets and Fixture Offsets: youtu.be/qo0h4Jdp-AQLink to my video on Repairing my Avid 4848 Pro CNC Router Spoilboard: youtu.be/_vBxGxMH_NcLink to @rockymountainplc video on How to use GRBL / G Code G10 and G54 offsets commands with Ready Motion:youtube.com/watch?v=38DF-Oy-Au8______________________________________________________________________________If you’d like to support my channel and help with the making of future videos, please consider becoming a channel member. If you’d rather make a one-time donation, you can do that by using the following link:PayPal: paypal.me/MarkLindsayCNCDirect link to more information on becoming a Channel Member: youtube.com/channel/UCMrMqMabXS5_cFcq5K9Ob-w/joinThank you very much!______________________________________________________________________________Link to the Vectric for the Absolute Beginner Playlist: youtube.com/playlist?list=PLLuYLaC3-QRNuVTej2P5emp1D4_Tm774pLink to the 3D Modeling for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QRPb0jNAfuB-xOlAUHWl1wkCLink to the V-Carving for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QROVf1Ua9BhGCzBty2FhZFmE______________________________________________________________________________Get your Official Mark Lindsay CNC T-shirts and coffee mugs here:http://marklindsaycnc.com/index.php/product-category/logo-productsmarklindsaycnc.com is sponsored by Harneal Media – a website developing company that specializes in websites for the maker community. Find out more at:harnealmedia.com______________________________________________________________________________Link to The Trampled Underfoot Podcast, hosted by my friend Eloy Escagedo and I. "Two guys from different decades, backgrounds, and opposite sides of the continent discuss life, the universe, and everything. What's the show about? About an hour..." YouTube: youtube.com/channel/UCPYOVYk9g-o0tliUqO18gnQFacebook Page: facebook.com/pg/TrampledUnderfootPodcastPast Episodes available at our website: trampledunderfootpodcast.com______________________________________________________________________________For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at:http://www.vectric.comFor more info, or to configure an Avid CNC of your own, visit their website: avidcnc.com______________________________________________________________________________Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos. I appreciate your support! This video is for informational and entertainment purposes only.#avidcnc #4848Pro #cncrouter
Live Q&A #182 – Open Q&A - Bowl Bits and Roundover Bits Mark Lindsay CNC 2023-03-12 | Live Q&A #182 – Open Q&A More down here ↓↓↓ Click MORE! This week is an Open Live Q&A where I'll answer your general CNC or Vectric Software questions. So, join me at Noon Pacific Time, 3 pm Eastern Time for this week’s Live Q&A, and get your questions answered! As usual, if you have any comments or questions, please put ‘em in the comment section below. Thanks for watching! Links to videos, Playlists, YouTube channels, products, and supplies as discussed in this video:Link to my video on Finishing the Pirate Epoxy Inlay: youtube.com/watch?v=u2A9L4b7VWULink to @RobSandstromDesigns YouTube channel: youtube.com/@RobSandstromDesignsLink to Rob's video on Bowl Bits: youtube.com/watch?v=UTp29eZa2K0 Link to Rob's video on Roundover Bits: youtube.com/watch?v=VNNTfhFeizgLink to Whiteside 1568 1/8 inch Radius Point Cutting Roundover Bit: routerbitworld.com/ProductDetails.asp?ProductCode=WHITESIDE-1568Link to Whiteside 1374 1/2 inch shank, 3/4 inch Diameter, 1/4 inch Radius Bowl and Tray Bit: amzn.to/3mCrDDe Link to Michael Mezalick’s YouTube channel: youtube.com/user/mezalick Link to CNCnutz (Peter Passuello’s) YouTube channel: youtube.com/c/cncnutz Click the JOIN button to get access to perks: youtube.com/marklindsaycnc/join Here’s a link to a YouTube page that gives you more info about Channel Memberships, how to join, upgrade or downgrade your membership, or how to cancel your membership: youtube.com/intl/en_au/join Please remember that I am NOT a CNC expert, and I cannot help you troubleshoot your CNC router. Every CNC router, controller, and controller software is different. Your best option is to contact your CNC manufacturer’s Tech Support division, or look for a Support Forum or Support Community through their website. They are the people who know your machine best, while I would only be guessing. Link to Mark’s Other Channel. My second YouTube channel that’s dedicated to non-CNC related projects. youtube.com/channel/UCXMdT30E3tx7myvt9jGx-pA ______________________________________________________________________________ If you’d like to support my channel, help fund the shop/shed build, and help with the making of future videos, you can donate by using the link below: PayPal: paypal.me/MarkLindsayCNC Link to the Vectric for the Absolute Beginner Playlist: youtube.com/playlist?list=PLLuYLaC3-QRNuVTej2P5emp1D4_Tm774p Link to the 3D Modeling for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QRPb0jNAfuB-xOlAUHWl1wkC Link to the V-Carving for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QROVf1Ua9BhGCzBty2FhZFmE ___________________________________________________________________________________ Get your Official Mark Lindsay CNC T-shirts and coffee mugs here: http://marklindsaycnc.com/index.php/product-category/logo-products marklindsaycnc.com is sponsored by Harneal Media – a website developing company that specializes in websites for the maker community. Find out more at: harnealmedia.com ___________________________________________________________________________________ For more info, or to configure an Avid CNC of your own, visit their website: avidcnc.com For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at: http://www.vectric.com For more tutorials on how to use Vectric Software, as well as some very cool projects, visit and subscribe to Vectric’s YouTube channel: youtube.com/user/Vectric __________________________________________________________________________________ Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos. I appreciate your support! This video is for informational and entertainment purposes only. #Aspire #VCarvePro #Tutorial #Beginner
Live Q&A #181 – Repairing the Spoilboard on my Avid 4848 Pro CNC Router Mark Lindsay CNC 2023-03-05 | Live Q&A #181 – Repairing the Spoilboard on my Avid 4848 Pro CNC Router More down here ↓↓↓ Click MORE! This week, I'll answer your questions about repairing and resurfacing the spoilboard on my Avid 4848 Pro CNC Router using Vectric Aspire and Mach4. Here’s a link to the video Repairing the Spoilboard on my Avid 4848 Pro CNC Router: youtu.be/_vBxGxMH_Nc As usual, if you have any comments or questions, please put ‘em in the comment section below. Thanks for watching! Links to videos, Playlists, YouTube channels, products, and supplies as discussed in this video:Link to Rob Shuster/Sidewinder Drums YouTube channel: youtube.com/@UCvnCvPe7CWFvSwewajtN6dQ Link to Rob's video on using Wood Putty vs Oramask: youtube.com/watch?v=Pz2o3cdmzz0Link to Rob's video 30° V-Bit Shootout: youtube.com/watch?v=gXyuKd9nxlILink to 3M Bondo Website: 3m.com/3M/en_US/p/d/b40071783Link to 3M Products for Wood PDF: multimedia.3m.com/mws/media/148465O/3mtm-industrial-products-for-woodworking-catalog.pdf Bondo 261 Lightweight Filler - 14 oz. Size: amzn.to/3mgfzrk Bondo Spreader 3-Pack: amzn.to/3Yh4vHw Flush Cut Hand Saw: amzn.to/3J5V7SO Titebond 3 Wood Glue: amzn.to/3mfVL7h STEELEX PLUS 1/4" Brad Point Bit: amzn.to/41uiblk Freud 1-1/4" Diameter Mortising Bit (16-106): amzn.to/2QySKNh Amana Tool RC-2255 3 Flute 2" Diameter Spoilboard Surfacing Bit: amzn.to/3U1Xlpb Link to Michael Mezalick’s YouTube channel: youtube.com/user/mezalick Link to CNCnutz (Peter Passuello’s) YouTube channel: youtube.com/c/cncnutz Click the JOIN button to get access to perks: youtube.com/marklindsaycnc/join Here’s a link to a YouTube page that gives you more info about Channel Memberships, how to join, upgrade or downgrade your membership, or how to cancel your membership: youtube.com/intl/en_au/join Please remember that I am NOT a CNC expert, and I cannot help you troubleshoot your CNC router. Every CNC router, controller, and controller software is different. Your best option is to contact your CNC manufacturer’s Tech Support division, or look for a Support Forum or Support Community through their website. They are the people who know your machine best, while I would only be guessing. Link to Mark’s Other Channel. My second YouTube channel that’s dedicated to non-CNC related projects. youtube.com/channel/UCXMdT30E3tx7myvt9jGx-pA ______________________________________________________________________________ If you’d like to support my channel, help fund the shop/shed build, and help with the making of future videos, you can donate by using the link below: PayPal: paypal.me/MarkLindsayCNC Link to the Vectric for the Absolute Beginner Playlist: youtube.com/playlist?list=PLLuYLaC3-QRNuVTej2P5emp1D4_Tm774p Link to the 3D Modeling for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QRPb0jNAfuB-xOlAUHWl1wkC Link to the V-Carving for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QROVf1Ua9BhGCzBty2FhZFmE ___________________________________________________________________________________ Get your Official Mark Lindsay CNC T-shirts and coffee mugs here: http://marklindsaycnc.com/index.php/product-category/logo-products ___________________________________________________________________________________ For more info, or to configure an Avid CNC of your own, visit their website: avidcnc.com For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at: http://www.vectric.com For more tutorials on how to use Vectric Software, as well as some very cool projects, visit and subscribe to Vectric’s YouTube channel: youtube.com/user/Vectric __________________________________________________________________________________ Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos. I appreciate your support! This video is for informational and entertainment purposes only. #Aspire #VCarvePro #Tutorial #Beginner
Repairing the Spoilboard on my @AvidCNC 4848 Pro CNC Router Mark Lindsay CNC 2023-03-05 | More down here ↓↓↓ Click SHOW MORE!In this video, I’ll demonstrate and discuss the steps I took to repair and resurface the spoilboard on my Avid 4848 Pro CNC Router.First I’ll go over the method I used to fix various screw and hail holes that come from fastening materials to the spoilboard. I’ll explain how I drilled out, then plugged those holes. I’ll demonstrate how I used automotive body filler to fill in cuts, dents, and gouges in the top of the spoilboard. Finally, I’ll wrap up by showing you how I surfaced the spoilboard to get a nice flat surface.As usual, if you have any comments or questions about anything I covered in this video, please join me for the Live Q&A, or put ‘em in the comment section below. On Sunday, March 5th, I’ll be hosting a LIVE Q&A session, where you can ask your questions pertaining to anything I’ve covered in this video. That Q&A starts at 3 pm Eastern time, Noon Pacific time. Hope to see you there!Here’s a link to the Live Q&A: youtube.com/live/f5jzwyL-M2ALink to Tools and Supplies used in making this video:Bondo 261 Lightweight Filler - 14 oz. Size: amzn.to/3mgfzrkBondo Spreader 3-Pack: amzn.to/3Yh4vHwFlush Cut Hand Saw: amzn.to/3J5V7SOTitebond 3 Wood Glue: amzn.to/3mfVL7hSTEELEX PLUS 1/4" Brad Point Bit: amzn.to/41uiblkFreud 1-1/4" Diameter Mortising Bit (16-106): amzn.to/2QySKNhAmana Tool RC-2255 3 Flute 2" Diameter Spoilboard Surfacing Bit: amzn.to/3U1Xlpb______________________________________________________________________________If you’d like to support my channel and help with the making of future videos, you can donate by using the following link:PayPal: paypal.me/MarkLindsayCNC______________________________________________________________________________Link to the Vectric for the Absolute Beginner Playlist: youtube.com/playlist?list=PLLuYLaC3-QRNuVTej2P5emp1D4_Tm774pLink to the 3D Modeling for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QRPb0jNAfuB-xOlAUHWl1wkCLink to the V-Carving for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QROVf1Ua9BhGCzBty2FhZFmE______________________________________________________________________________Get your Official Mark Lindsay CNC T-shirts and coffee mugs here:http://marklindsaycnc.com/index.php/product-category/logo-productsmarklindsaycnc.com is sponsored by Harneal Media – a website developing company that specializes in websites for the maker community. Find out more at:harnealmedia.com______________________________________________________________________________For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at:http://www.vectric.com______________________________________________________________________________Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos. I appreciate your support! This video is for informational and entertainment purposes only.#Aspire #VCarve #Vectric #Tutorial
Live Q&A #180 – Open Q&A Mark Lindsay CNC 2023-02-26 | Live Q&A #180 – Open Q&A More down here ↓↓↓ Click MORE! This week is an Open Live Q&A where I'll answer your general CNC or Vectric Software questions. So, join me at Noon Pacific Time, 3 pm Eastern Time for this week’s Live Q&A, and get your questions answered! As usual, if you have any comments or questions, please put ‘em in the comment section below. Thanks for watching! Links to videos, Playlists, YouTube channels, products, and supplies as discussed in this video: Link to Michael Mezalick’s YouTube channel: youtube.com/user/mezalick Link to CNCnutz (Peter Passuello’s) YouTube channel: youtube.com/c/cncnutz Link to Amana Tool 45611-K Solid Carbide 15 Degree Engraving Bit: amzn.to/3KBrDgV Click the JOIN button to get access to perks: youtube.com/marklindsaycnc/join Here’s a link to a YouTube page that gives you more info about Channel Memberships, how to join, upgrade or downgrade your membership, or how to cancel your membership: youtube.com/intl/en_au/join Please remember that I am NOT a CNC expert, and I cannot help you troubleshoot your CNC router. Every CNC router, controller, and controller software is different. Your best option is to contact your CNC manufacturer’s Tech Support division, or look for a Support Forum or Support Community through their website. They are the people who know your machine best, while I would only be guessing. Link to Mark’s Other Channel. My second YouTube channel that’s dedicated to non-CNC related projects. youtube.com/channel/UCXMdT30E3tx7myvt9jGx-pA ______________________________________________________________________________ If you’d like to support my channel, help fund the shop/shed build, and help with the making of future videos, you can donate by using the link below: PayPal: paypal.me/MarkLindsayCNC Link to the Vectric for the Absolute Beginner Playlist: youtube.com/playlist?list=PLLuYLaC3-QRNuVTej2P5emp1D4_Tm774p Link to the 3D Modeling for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QRPb0jNAfuB-xOlAUHWl1wkC Link to the V-Carving for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QROVf1Ua9BhGCzBty2FhZFmE ___________________________________________________________________________________ Get your Official Mark Lindsay CNC T-shirts and coffee mugs here: http://marklindsaycnc.com/index.php/product-category/logo-products marklindsaycnc.com is sponsored by Harneal Media – a website developing company that specializes in websites for the maker community. Find out more at: harnealmedia.com ___________________________________________________________________________________ For more info, or to configure an Avid CNC of your own, visit their website: avidcnc.com For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at: http://www.vectric.com For more tutorials on how to use Vectric Software, as well as some very cool projects, visit and subscribe to Vectric’s YouTube channel: youtube.com/user/Vectric __________________________________________________________________________________ Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos. I appreciate your support! This video is for informational and entertainment purposes only. #Aspire #VCarvePro #Tutorial #Beginner
Live Q&A #179 – Manually Setting X Y and Z Zero on my Avid 4848 Pro CNC Router Mark Lindsay CNC 2023-02-19 | More down here ↓↓↓ Click MORE! This week, I'll answer your questions on manually setting X Y and Z zero my Avid 4848 Pro CNC Router using Vectric Aspire and Mach4. Here’s a link to the video Manually Setting X Y and Z Zero on my Avid 4848 Pro CNC Router: youtu.be/X7ag5C0D5vM As usual, if you have any comments or questions, please put ‘em in the comment section below. Thanks for watching! Links to videos, Playlists, YouTube channels, products, and supplies as discussed in this video:Link to my video on Work and Fixture Offsets: youtube.com/watch?v=qo0h4Jdp-AQLink to my video on Recovering X Y Zero After Power Outage: youtube.com/watch?v=LEt-GqYNKa8 CMT 90-Degree V-Groove Bit, 1/4-Inch Shank: amzn.to/3KjyDPh Bosch 85903M 1/4 Inch Solid Carbide 2-Flute Downcut Spiral Bit: amzn.to/2N2CFxa Link to Michael Mezalick’s YouTube channel: youtube.com/user/mezalick Link to CNCnutz (Peter Passuello’s) YouTube channel: youtube.com/c/cncnutz Click the JOIN button to get access to perks: youtube.com/marklindsaycnc/join Here’s a link to a YouTube page that gives you more info about Channel Memberships, how to join, upgrade or downgrade your membership, or how to cancel your membership: youtube.com/intl/en_au/join Please remember that I am NOT a CNC expert, and I cannot help you troubleshoot your CNC router. Every CNC router, controller, and controller software is different. Your best option is to contact your CNC manufacturer’s Tech Support division, or look for a Support Forum or Support Community through their website. They are the people who know your machine best, while I would only be guessing. Link to Mark’s Other Channel. My second YouTube channel that’s dedicated to non-CNC related projects. youtube.com/channel/UCXMdT30E3tx7myvt9jGx-pA ______________________________________________________________________________ If you’d like to support my channel, help fund the shop/shed build, and help with the making of future videos, you can donate by using the link below: PayPal: paypal.me/MarkLindsayCNC Link to the Vectric for the Absolute Beginner Playlist: youtube.com/playlist?list=PLLuYLaC3-QRNuVTej2P5emp1D4_Tm774p Link to the 3D Modeling for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QRPb0jNAfuB-xOlAUHWl1wkC Link to the V-Carving for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QROVf1Ua9BhGCzBty2FhZFmE ___________________________________________________________________________________ Get your Official Mark Lindsay CNC T-shirts and coffee mugs here: http://marklindsaycnc.com/index.php/product-category/logo-products ___________________________________________________________________________________ For more info, or to configure an Avid CNC of your own, visit their website: avidcnc.com For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at: http://www.vectric.com For more tutorials on how to use Vectric Software, as well as some very cool projects, visit and subscribe to Vectric’s YouTube channel: youtube.com/user/Vectric __________________________________________________________________________________ Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos. I appreciate your support! This video is for informational and entertainment purposes only. #mach4 #avidcnc #Vectric #Tutorial
Manually Setting X Y and Z Zero on my @AvidCNC 4848 Pro CNC Router Mark Lindsay CNC 2023-02-19 | Manually Setting X Y and Z Zero on my Avid 4848 Pro CNC RouterMore down here ↓↓↓ Click SHOW MORE!In this video, I’ll demonstrate and discuss manually setting X, Y, and Z zero my Avid 4848 Pro CNC Router.First I’ll briefly touch on the Cartesian Coordinate System that all CNC equipment uses to operate. I’ll explain how it works in theory, and in practice. I'll then briefly explain how this relates to CNC in @vectric Aspire.Out on the CNC router, I’ll demonstrate positioning the spindle, and setting the X Y datum position at the center of a piece of material. I’ll then set X Y zero in Mach4. I’ll then demonstrate using Incremental Jogging to set Z zero to the material surface. I’ll also demonstrate manually setting the X Y datum position to the bottom left corner, and discuss when NOT to set X and Y zero.Finally, I’ll wrap up by briefly discussing touch plates.As usual, if you have any comments or questions about anything I covered in this video, please join me for the Live Q&A, or put ‘em in the comment section below. On Sunday, February 19th, I’ll be hosting a LIVE Q&A session, where you can ask your questions pertaining to anything I’ve covered in this video. That Q&A starts at 3 pm Eastern time, Noon Pacific time. Hope to see you there!Here’s a link to the Live Q&A: youtube.com/live/fZpw_4lcWRwLink to Tools and Supplies used in making this video:CMT 90-Degree V-Groove Bit, 1/4-Inch Shank: amzn.to/3KjyDPhBosch 85903M 1/4 Inch Solid Carbide 2-Flute Downcut Spiral Bit: amzn.to/2N2CFxa______________________________________________________________________________If you’d like to support my channel and help with the making of future videos, you can donate by using the following link:PayPal: paypal.me/MarkLindsayCNC______________________________________________________________________________Link to the Vectric for the Absolute Beginner Playlist: youtube.com/playlist?list=PLLuYLaC3-QRNuVTej2P5emp1D4_Tm774pLink to the 3D Modeling for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QRPb0jNAfuB-xOlAUHWl1wkCLink to the V-Carving for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QROVf1Ua9BhGCzBty2FhZFmE______________________________________________________________________________Get your Official Mark Lindsay CNC T-shirts and coffee mugs here:http://marklindsaycnc.com/index.php/product-category/logo-productsmarklindsaycnc.com is sponsored by Harneal Media – a website developing company that specializes in websites for the maker community. Find out more at:harnealmedia.com______________________________________________________________________________For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at:http://www.vectric.com______________________________________________________________________________Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos. I appreciate your support! This video is for informational and entertainment purposes only.#mach4 #avidcnc #Vectric #Tutorial
Live Q&A #178 – Open Q&A Mark Lindsay CNC 2023-02-12 | Live Q&A #178 – Open Q&A More down here ↓↓↓ Click MORE! This week is an Open Live Q&A where I'll answer your general CNC or Vectric Software questions. So, join me at Noon Pacific Time, 3 pm Eastern Time for this week’s Live Q&A, and get your questions answered! As usual, if you have any comments or questions, please put ‘em in the comment section below. Thanks for watching! Links to videos, Playlists, YouTube channels, products, and supplies as discussed in this video:Disclaimer: Following link is an affiliate code so Rob Sandstrom may get a small commission if you use this link and code.MAS LV epoxy and Medium Hardener each sold separately: masepoxies.com/?oid=1&affid=289Coupon code: MAS - ROB10Link to Cadence Mfg & Design - Down Shear V-Bits: cadencemfgdesign.com/shop Link to Michael Mezalick’s YouTube channel: youtube.com/user/mezalick Link to CNCnutz (Peter Passuello’s) YouTube channel: youtube.com/c/cncnutz Click the JOIN button to get access to perks: youtube.com/marklindsaycnc/join Here’s a link to a YouTube page that gives you more info about Channel Memberships, how to join, upgrade or downgrade your membership, or how to cancel your membership: youtube.com/intl/en_au/join Please remember that I am NOT a CNC expert, and I cannot help you troubleshoot your CNC router. Every CNC router, controller, and controller software is different. Your best option is to contact your CNC manufacturer’s Tech Support division, or look for a Support Forum or Support Community through their website. They are the people who know your machine best, while I would only be guessing. Link to Mark’s Other Channel. My second YouTube channel that’s dedicated to non-CNC related projects. youtube.com/channel/UCXMdT30E3tx7myvt9jGx-pA ______________________________________________________________________________ If you’d like to support my channel, help fund the shop/shed build, and help with the making of future videos, you can donate by using the link below: PayPal: paypal.me/MarkLindsayCNC Link to the Vectric for the Absolute Beginner Playlist: youtube.com/playlist?list=PLLuYLaC3-QRNuVTej2P5emp1D4_Tm774p Link to the 3D Modeling for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QRPb0jNAfuB-xOlAUHWl1wkC Link to the V-Carving for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QROVf1Ua9BhGCzBty2FhZFmE ___________________________________________________________________________________ Get your Official Mark Lindsay CNC T-shirts and coffee mugs here: http://marklindsaycnc.com/index.php/product-category/logo-products marklindsaycnc.com is sponsored by Harneal Media – a website developing company that specializes in websites for the maker community. Find out more at: harnealmedia.com ___________________________________________________________________________________ For more info, or to configure an Avid CNC of your own, visit their website: avidcnc.com For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at: http://www.vectric.com For more tutorials on how to use Vectric Software, as well as some very cool projects, visit and subscribe to Vectric’s YouTube channel: youtube.com/user/Vectric __________________________________________________________________________________ Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos. I appreciate your support! This video is for informational and entertainment purposes only. #Aspire #VCarvePro #Tutorial #Beginner
