Uploaded June 2024 | Updated September 2026, 2 weeks ago
In this live we had the following guest hosts as part of the live:
➡️ Lucky Warwick - his website is: luckyduckwoodworking.com
➡️ Michael Bernasconi - his website is: envision-create.com
➡️ Jim Matthews
The main topic of discussion was a series of videos - links below where I demonstrated how to take Carbin Dunn’s files for a heart shape bowl and used Vectric VCarve to create and carve the bowl with that software. This discussion lead to discussions ranging from:
✅ importing single and double sided projects
✅ timeline for making this type of bowl project
✅ epoxy used and general epoxy discussions
✅ holddown techniques
✅ setting the limit planes to allow the proper carving of the “Drip Stock” and Heart Shaped bowl
✅ purchasing wood and considerations when carving
✅ bits used in the project
✅ glue up of dissimilar materials for future bowls
➡️ Heartbowl Series of Videos: youtube.com/playlist?list=PLbuKRLARGPOzer7NCzMwsXZj_OAxDIS_k
➡️ Corbin’s Bowl Files: corbinsworkshop.com/shop/heart-bowl-plans-directions-model-stl-fusion-360-cnc-files
⏰Timecodes⏰
00:00:00 Introduction of Studio Guest
00:02:20 Heartbowl Overview Discussion based on video released in last week
00:08:35 Jim Matthews shared insights on bowl complexity
00:10:15 Discussion on Timeline for Making Bowl Based on Question
00:14:30 Discussion on Types of Epoxy Used and Different Types of Epoxy for Various Projects
00:20:15 Hold down Discussion for Bowl
00:22:20 Demonstration and Discussion Limit Planes
00:31:35 Question Where Does Limit Plane Come From?
00:38:30 Epoxy Pour Discussions
00:46:15 Discussion About Wood Choices for Bowl and Other Projects/Possible Wood Movement Issues when carving
00:50:40 Discussion Regarding VCarve Will Only Allow Import of 1 STL File and Need to create two different vCarve Projects Because of this limitation
00:54:00 Discussion About Where Panel Obtains/Purchases Wood
00:59:30 Discussion of glue-up of Dissimilar Woods
01:00:00 Discussion of Potential 1st Time Projects
01:05:00 Use of Cross Section Vector Tool in Vectric vCarve - What it can do for you
====================
Connect with me !
====================
Website: robsandstromdesigns.com
Instagram: https://www.instagram.com/robsandstro...
Facebook: https://www.facebook.com/robsandstrom...
Disclosure Discussion: Several of the links provided below are affiliate links for which I receive a small commission if products are purchased using the link. In som cases there is also a discount code. These purchases help support the channel and my ability to make these videos and should not result i any additional cost to you if you chose to use them.
I have several additional resource links provided on my website at the following link:
➡️ robsandstromdesigns.com/resources
The below are resources discussed in my videos and this live session
👀 Bits Discussed in the video:
Bits I used for the project can be obtained through rippreceissiontools.com at the following link:
➡️ ripprecisiontools.com/?ref=692c5q8z
If you use the Referral Code: ROBSANDSTROM you will receive a discount on the price of the bit
3/8" Ball Nose - 1-1/4" Flute Length - 3" Total Length - 4 Flute SKU: BN-375125H45F4
3/8" Spiral Upcut - 1.0" Flute Length - 3" Total Length - 4 Flute
SKU: SU-37510H45F4
1/8" Tapered Ballnose - 2.0" Flute Length - 1.8 Deg. Side Angle - 4 Flute
SKU: TBN-12520F4
Jim Matthews mentioned bits he used a bit called “The HOG”
➡️ idcwoodcraft.com/products/the-hog-long-1-4-roughing-endmill-bit-for-cnc-routers-1-4-shank
👀 Epoxy Discussed in this video. Discussed that I get most of my supplies these days Epoxy, Pigments, molds, etc. from Eye Candy Pigments at link below:
➡️ https://eyecandypigments.com?sca_ref=4240192.fEhULiPiP9
If use Coupon Code: ROB10 you will get a discount
For Deep Pour Epoxy I Usually use:
Superclear or Ultra Clear Deep Pour Epoxy
👀 MAS LV Epoxy Is My Choice for TableTop Epoxy
➡️ MAS: masepoxies.com/?oid=1&affid=289
Coupon code: MAS - ROB10
👀 Ol Loggin Epoxy and Sawmill:
➡️ Ol Loggin Epoxy Table Top and Artist Epoxy: ollogginepoxy.com
A 20% Discount Code can be used if you purchase this epoxy.
Use Discount Code at Checkout: ROB10
👀 For Wood Supplies I mentioned Ol Loggin Sawmill has good deals for Charcuterie Kits:
➡️ Ol Loggin Sawmill: ollogginsawmill.com/store
A 20% Discount Code can be used if you purchase this epoxy.
Use Discount Code at Checkout: ROB20
👀 Finish Used on Bowl is BumbleChutes All-Wood-Finish and BeeNooba Hard Wax
➡️ Link to products: bumblechutes.com/?ref=uelhhmhv
Discount Code: ROBSANDSTROM (10% off)
👀 Side clamps used in the video:
➡️ amzn.to/3k1lcsh
In this live we had the following guest hosts as part of the live:
➡️ Lucky Warwick - his website is: luckyduckwoodworking.com
➡️ Michael Bernasconi - his website is: envision-create.com
➡️ Jim Matthews
The main topic of discussion was a series of videos - links below where I demonstrated how to take Carbin Dunn’s files for a heart shape bowl and used Vectric VCarve to create and carve the bowl with that software. This discussion lead to discussions ranging from:
✅ importing single and double sided projects
✅ timeline for making this type of bowl project
✅ epoxy used and general epoxy discussions
✅ holddown techniques
✅ setting the limit planes to allow the proper carving of the “Drip Stock” and Heart Shaped bowl
✅ purchasing wood and considerations when carving
✅ bits used in the project
✅ glue up of dissimilar materials for future bowls
➡️ Heartbowl Series of Videos: youtube.com/playlist?list=PLbuKRLARGPOzer7NCzMwsXZj_OAxDIS_k
➡️ Corbin’s Bowl Files: corbinsworkshop.com/shop/heart-bowl-plans-directions-model-stl-fusion-360-cnc-files
⏰Timecodes⏰
00:00:00 Introduction of Studio Guest
00:02:20 Heartbowl Overview Discussion based on video released in last week
00:08:35 Jim Matthews shared insights on bowl complexity
00:10:15 Discussion on Timeline for Making Bowl Based on Question
00:14:30 Discussion on Types of Epoxy Used and Different Types of Epoxy for Various Projects
00:20:15 Hold down Discussion for Bowl
00:22:20 Demonstration and Discussion Limit Planes
00:31:35 Question Where Does Limit Plane Come From?
00:38:30 Epoxy Pour Discussions
00:46:15 Discussion About Wood Choices for Bowl and Other Projects/Possible Wood Movement Issues when carving
00:50:40 Discussion Regarding VCarve Will Only Allow Import of 1 STL File and Need to create two different vCarve Projects Because of this limitation
00:54:00 Discussion About Where Panel Obtains/Purchases Wood
00:59:30 Discussion of glue-up of Dissimilar Woods
01:00:00 Discussion of Potential 1st Time Projects
01:05:00 Use of Cross Section Vector Tool in Vectric vCarve - What it can do for you
====================
Connect with me !
====================
Website: robsandstromdesigns.com
Instagram: https://www.instagram.com/robsandstro...
Facebook: https://www.facebook.com/robsandstrom...
Disclosure Discussion: Several of the links provided below are affiliate links for which I receive a small commission if products are purchased using the link. In som cases there is also a discount code. These purchases help support the channel and my ability to make these videos and should not result i any additional cost to you if you chose to use them.
I have several additional resource links provided on my website at the following link:
➡️ robsandstromdesigns.com/resources
The below are resources discussed in my videos and this live session
👀 Bits Discussed in the video:
Bits I used for the project can be obtained through rippreceissiontools.com at the following link:
➡️ ripprecisiontools.com/?ref=692c5q8z
If you use the Referral Code: ROBSANDSTROM you will receive a discount on the price of the bit
3/8" Ball Nose - 1-1/4" Flute Length - 3" Total Length - 4 Flute SKU: BN-375125H45F4
3/8" Spiral Upcut - 1.0" Flute Length - 3" Total Length - 4 Flute
SKU: SU-37510H45F4
1/8" Tapered Ballnose - 2.0" Flute Length - 1.8 Deg. Side Angle - 4 Flute
SKU: TBN-12520F4
Jim Matthews mentioned bits he used a bit called “The HOG”
➡️ idcwoodcraft.com/products/the-hog-long-1-4-roughing-endmill-bit-for-cnc-routers-1-4-shank
👀 Epoxy Discussed in this video. Discussed that I get most of my supplies these days Epoxy, Pigments, molds, etc. from Eye Candy Pigments at link below:
➡️ https://eyecandypigments.com?sca_ref=4240192.fEhULiPiP9
If use Coupon Code: ROB10 you will get a discount
For Deep Pour Epoxy I Usually use:
Superclear or Ultra Clear Deep Pour Epoxy
👀 MAS LV Epoxy Is My Choice for TableTop Epoxy
➡️ MAS: masepoxies.com/?oid=1&affid=289
Coupon code: MAS - ROB10
👀 Ol Loggin Epoxy and Sawmill:
➡️ Ol Loggin Epoxy Table Top and Artist Epoxy: ollogginepoxy.com
A 20% Discount Code can be used if you purchase this epoxy.
Use Discount Code at Checkout: ROB10
👀 For Wood Supplies I mentioned Ol Loggin Sawmill has good deals for Charcuterie Kits:
➡️ Ol Loggin Sawmill: ollogginsawmill.com/store
A 20% Discount Code can be used if you purchase this epoxy.
Use Discount Code at Checkout: ROB20
👀 Finish Used on Bowl is BumbleChutes All-Wood-Finish and BeeNooba Hard Wax
➡️ Link to products: bumblechutes.com/?ref=uelhhmhv
Discount Code: ROBSANDSTROM (10% off)
👀 Side clamps used in the video:
➡️ amzn.to/3k1lcsh
