Uploaded September 2024 | Updated September 2026, 2 weeks ago
Find out more or pick up your own kit here (Aff):
kb-3d.com/store/positron/1154-pre-order-ldo-positron-v32-3d-printer-build-kit-batch-2-1714355343710.html?affp=16576
Cookie CAD filament used for the build (AFF):
kb-3d.com/store/abs/1223-cookiecad-filament-abs-unicorn-1kg-175mm-850027584508.html?affp=16576
Positron 3.2 project site:
positron3d.com
Love the channel? Consider supporting me on Patreon:
patreon.com/user?u=806627
Get Great Filament From PolyMaker & Help Support The Channel:
bit.ly/3P5MRD7
Join the official ModBotArmy discord server: discord.gg/NEpd2A5ACe
Follow Me On Other Platforms To Stay Up To Date:
YouTube (Main Channel):
youtube.com/channel/UCCS6ZRelvETSbA53xFEsa6w
Twitter:
twitter.com/ModBotArmy
Instagram:
instagram.com/modbotarmy/?hl=en
TikTok:
tiktok.com/@modbotarmy?lang=en
The day has finally come! We are building the LDO Positron 3.2 upside down printer. While the last one we attempted was a revised version that was self sourced, this is a complete kit. I am very excited to see how the build experience compares and to get this printer assembled. In this first stream we will take a look at what comes in the kit and get the extruder built. Hopefully we will make it a bit further but knowing me we may just get side tracked... Come hang out, ask questions, and have a great time!!
(´∀｀)♡ As an Amazon Associate I earn from qualifying purchases:
Streaming Gear:
2 x C920 Webcams (Top & Side Cam):
amzn.to/3b8nxKd
Panasonic G7 (Face Cam):
amzn.to/3jvWM72
Sony A6400 (Mobile Cam):
amzn.to/3CcwspE
El Gato 4k Cam Link:
amzn.to/3b56LeV
Secondary Capture Card:
amzn.to/3b7o4My
El Gato Stream Deck:
amzn.to/3pxS9xe
Rode Wireless Go Mic:
amzn.to/3npkwux
Monitor Mounts:
amzn.to/3EeONmT
Camera Mounts:
amzn.to/3ba5pPS
Light Panels:
amzn.to/3E1FAhA
Find out more or pick up your own kit here (Aff):
kb-3d.com/store/positron/1154-pre-order-ldo-positron-v32-3d-printer-build-kit-batch-2-1714355343710.html?affp=16576
Cookie CAD filament used for the build (AFF):
kb-3d.com/store/abs/1223-cookiecad-filament-abs-unicorn-1kg-175mm-850027584508.html?affp=16576
Positron 3.2 project site:
positron3d.com
Love the channel? Consider supporting me on Patreon:
patreon.com/user?u=806627
Get Great Filament From PolyMaker & Help Support The Channel:
bit.ly/3P5MRD7
Join the official ModBotArmy discord server: discord.gg/NEpd2A5ACe
Follow Me On Other Platforms To Stay Up To Date:
YouTube (Main Channel):
youtube.com/channel/UCCS6ZRelvETSbA53xFEsa6w
Twitter:
twitter.com/ModBotArmy
Instagram:
instagram.com/modbotarmy/?hl=en
TikTok:
tiktok.com/@modbotarmy?lang=en
The day has finally come! We are building the LDO Positron 3.2 upside down printer. While the last one we attempted was a revised version that was self sourced, this is a complete kit. I am very excited to see how the build experience compares and to get this printer assembled. In this first stream we will take a look at what comes in the kit and get the extruder built. Hopefully we will make it a bit further but knowing me we may just get side tracked... Come hang out, ask questions, and have a great time!!
(´∀｀)♡ As an Amazon Associate I earn from qualifying purchases:
Streaming Gear:
2 x C920 Webcams (Top & Side Cam):
amzn.to/3b8nxKd
Panasonic G7 (Face Cam):
amzn.to/3jvWM72
Sony A6400 (Mobile Cam):
amzn.to/3CcwspE
El Gato 4k Cam Link:
amzn.to/3b56LeV
Secondary Capture Card:
amzn.to/3b7o4My
El Gato Stream Deck:
amzn.to/3pxS9xe
Rode Wireless Go Mic:
amzn.to/3npkwux
Monitor Mounts:
amzn.to/3EeONmT
Camera Mounts:
amzn.to/3ba5pPS
Light Panels:
amzn.to/3E1FAhA
