Uploaded March 2026 | Updated November 2026, 3 hours ago
We take a look at the MachXO4 Development Board from Lattice Semiconductor. The MachXO4 family of low-power and non-volatile FPGAs can scale with evolving connectivity and control applications.
Inside the box, you’ll find the MachXO4 development board, a USB programming cable, and a quick start guide with information for Lattice’s Radiant software.
In this demo, we’re going to run the included example code, which sets up a couple of ping-pong counters based on the 100 megahertz differential clock. Then we’ll take a look at some of the hardware features of the board that enable simplified management and flexible development.
Setup is simple. Verify that JP5 is populated, then plug the included USB cord into the board and into your computer. This provides power and communication with the board. You’ll see the seven segment LED light up.
Press and release SW2 to start the preloaded example, which uses two counters and the on-board LEDs D1 to D8 to indicate the status of each counter. When one counter fills up, the other resets and starts counting up, and the cycle repeats.
While that’s a basic demo, you can use the source code in Lattice Radiant software as a starting point to develop your own application, and Radiant is free to use with the MachXO4 family.
The board features Raspberry Pi and Arduino connectors on the back, Versa and Aardvark connectors on the front, and positions for Hirose FX12 connectors and for LVDS signals, enabling fast and flexible development.
digikey.com/en/products/detail/lattice-semiconductor-corporation/LFMXO4-110-EVN/27526644
digikey.com/en/product-highlight/l/lattice/machxo4-fpga-family this should go live soon
Maker.io - digikey.com/en/maker
DigiKey’s Blog – TheCircuit digikey.com/en/blog
Connect with DigiKey on Facebook facebook.com/digikey.electronics
And follow us on X https://x.com/digikey
We take a look at the MachXO4 Development Board from Lattice Semiconductor. The MachXO4 family of low-power and non-volatile FPGAs can scale with evolving connectivity and control applications.
Inside the box, you’ll find the MachXO4 development board, a USB programming cable, and a quick start guide with information for Lattice’s Radiant software.
In this demo, we’re going to run the included example code, which sets up a couple of ping-pong counters based on the 100 megahertz differential clock. Then we’ll take a look at some of the hardware features of the board that enable simplified management and flexible development.
Setup is simple. Verify that JP5 is populated, then plug the included USB cord into the board and into your computer. This provides power and communication with the board. You’ll see the seven segment LED light up.
Press and release SW2 to start the preloaded example, which uses two counters and the on-board LEDs D1 to D8 to indicate the status of each counter. When one counter fills up, the other resets and starts counting up, and the cycle repeats.
While that’s a basic demo, you can use the source code in Lattice Radiant software as a starting point to develop your own application, and Radiant is free to use with the MachXO4 family.
The board features Raspberry Pi and Arduino connectors on the back, Versa and Aardvark connectors on the front, and positions for Hirose FX12 connectors and for LVDS signals, enabling fast and flexible development.
digikey.com/en/products/detail/lattice-semiconductor-corporation/LFMXO4-110-EVN/27526644
digikey.com/en/product-highlight/l/lattice/machxo4-fpga-family this should go live soon
Maker.io - digikey.com/en/maker
DigiKey’s Blog – TheCircuit digikey.com/en/blog
Connect with DigiKey on Facebook facebook.com/digikey.electronics
And follow us on X https://x.com/digikey










