Uploaded May 2026 | Updated November 2026, 3 hours ago
We take a look at the AD-APARD32690-SL evaluation kit from Analog Devices. Featuring the MAX32690 MCU and a 10BASE-T1L Single-Pair Ethernet interface, it’s designed for prototyping industrial field devices.
Inside the box, you’ll find the AD-APARD32690-SL development board with an Arduino Mega-compatible form factor, a 10BASE-T1L to USB adapter board, a PROFIBUS cable for SPE connectivity, and a USB cable.
In this demo we’re going to use the USB adapter board to send a message to the MAX32690 over the 10BASE-T1L interface, and it will echo that message back. To program the board, we’re using a MAX32625PICO Evaluation Kit.
Follow the user guide to ensure your programmer is ready to use and to build the example code. Plug the programmer into the development board and connect the SPE cable between the SPE headers on the development board and the USB adapter board. Plug everything into USB. The development board can be powered via USB-C if your port supports it. Otherwise, you can power it externally.
Once all your connections are made, open a terminal program to monitor the serial port of the programmer. Drag and drop the hex file onto the drive labeled DAPLINK. The drive will unmount and then remount when programming is complete. In the terminal, note the IP address and subnet mask that the development board is using. You’ll need to set the computer’s network interface for the adapter board to an IP address in the same range and set the subnet to match. Then open a command prompt and use netcat or ncat to connect to the host, send a message, and wait for it to be echoed back.
digikey.com/en/products/detail/analog-devices-inc/AD-APARD32690-SL/22231385
digikey.com/en/products/detail/analog-devices-inc-maxim-integrated/MAX32625PICO/7560410
Maker.io - digikey.com/en/maker
DigiKey’s Blog – TheCircuit digikey.com/en/blog
Connect with DigiKey on Facebook facebook.com/digikey.electronics
And follow us on X https://x.com/digikey
We take a look at the AD-APARD32690-SL evaluation kit from Analog Devices. Featuring the MAX32690 MCU and a 10BASE-T1L Single-Pair Ethernet interface, it’s designed for prototyping industrial field devices.
Inside the box, you’ll find the AD-APARD32690-SL development board with an Arduino Mega-compatible form factor, a 10BASE-T1L to USB adapter board, a PROFIBUS cable for SPE connectivity, and a USB cable.
In this demo we’re going to use the USB adapter board to send a message to the MAX32690 over the 10BASE-T1L interface, and it will echo that message back. To program the board, we’re using a MAX32625PICO Evaluation Kit.
Follow the user guide to ensure your programmer is ready to use and to build the example code. Plug the programmer into the development board and connect the SPE cable between the SPE headers on the development board and the USB adapter board. Plug everything into USB. The development board can be powered via USB-C if your port supports it. Otherwise, you can power it externally.
Once all your connections are made, open a terminal program to monitor the serial port of the programmer. Drag and drop the hex file onto the drive labeled DAPLINK. The drive will unmount and then remount when programming is complete. In the terminal, note the IP address and subnet mask that the development board is using. You’ll need to set the computer’s network interface for the adapter board to an IP address in the same range and set the subnet to match. Then open a command prompt and use netcat or ncat to connect to the host, send a message, and wait for it to be echoed back.
digikey.com/en/products/detail/analog-devices-inc/AD-APARD32690-SL/22231385
digikey.com/en/products/detail/analog-devices-inc-maxim-integrated/MAX32625PICO/7560410
Maker.io - digikey.com/en/maker
DigiKey’s Blog – TheCircuit digikey.com/en/blog
Connect with DigiKey on Facebook facebook.com/digikey.electronics
And follow us on X https://x.com/digikey










