Uploaded October 2026 | Updated November 2026, 3 hours ago
Lasko Decor America 52" ceiling fan in white/polished brass. This is a fan that I found in the trash during Cleanup Week probably more than a decade ago now, and it's had quite the journey to this video. I debated parting it out a lot of times. It was missing the mounting bracket for the original wide canopy, which for these is strike one because I only have one. But that's not enough reason to give up. It never looked to be in great condition, I think it'd been rained on some if I remember right, plus the bearings felt like they'd be noisy. But I could never bring myself to fully get rid of it. So I just kept sitting on it, and it made the move over into my new space from my parents' old house, and just kept sitting. Recently with my pile of other new inventory dwindling, I started eyeing it again, and really decided it wasn't as bad as it looked. My new thing has been converting some of these Laskos to use Casablanca rod systems and generic mounting, just to make the single factory bracket I do have a little less in-demand, and be able to hang these things up with more ease. Plus, as we know, I prefer downrods. I mostly find them flush mounted, and adding a rod makes them more appealing to me. These days I have more of those spare parts on hand, where in the past I didn't, which is part of the shift I had toward reviving this one. It was actually feasible to have parts that would get it up on the ceiling. What a wonderful thing that relatively common Casa parts do work, it's a real lifesaver. I started cleaning it all up, and the motor turned out really beautifully. Looks almost brand new. Moved to the blades, and forgot that they'd been taped together, and since they'd been wet, the finish peeled off some spots on areas of both finish options, and the rest looked so good I didn't want to settle for subpar blades. I ended up pulling this Emerson set to use because it was the closest I could get to original in terms of a usable finish and their general shape. Again, incredible that like Emerson, the hole spacing for these never changed. They're a little narrower at the tips of course, so you kind of lose some of that signature Lasko look, but I actually don't mind the fact that they look immensely less saggy, and the performance is quite good with a little of the weight shaved off. I did keep the blades and may try to repaint them someday, but it's a project I couldn't prioritize now. I can't remember what light it had, but I think it was destroyed and I tossed it way back when. Whatever it was left some evidence of it being there on the switch housing, so while I would've simply preferred no light, it looks better with one. Just pulled a combo together that I thought would suit the 90s vibe. Surprisingly, it runs quite smooth and quiet. As mentioned, the way the motor felt turning by hand was one of the major things that kept this one on the back burner. Had a little noise on first run, but that faded after it ran for a bit. Kinda buzzy/hummy, but nothing I won't tolerate. Sorry this was a long one, but I wanted to explain all the intentional choices made. I knew it wouldn't be fully original anymore, but the result of a nice-looking, usable fan was really the appeal in the end and it looks really great.
Also, bonus. I'm going to use the original canopy from this one for my 42" white/brass Lasko, because that canopy has a rather crude hole drilled in one side. I assume they ran exterior wire or a swag kit in its past life. Not only does it not look nice, but it also makes it a pain to get the canopy onto the bracket, so I'm beyond excited to swap that out. That fan is also in really prime condition aside from that modification, so now it'll have an unaltered canopy to match.
Visit My Website: vintagefansandmore.com
VF&M Merch: shop.spreadshirt.com/vintagefansandmore
VF&M LinkedIn: linkedin.com/company/vfandm
Like VF&M on Facebook: facebook.com/vintagefansandmore
Follow me on Instagram: instagram.com/vfandm
Follow me on TikTok: tiktok.com/@vfandm
Follow me on Bluesky: https://bsky.app/profile/vfandm.bsky.social
Consider shopping my Amazon Recommendations to support my channel*: amazon.com/shop/vintagefansmore
#CeilingFan
*As an Amazon Associate I earn from qualifying purchases.
Lasko Decor America 52" ceiling fan in white/polished brass. This is a fan that I found in the trash during Cleanup Week probably more than a decade ago now, and it's had quite the journey to this video. I debated parting it out a lot of times. It was missing the mounting bracket for the original wide canopy, which for these is strike one because I only have one. But that's not enough reason to give up. It never looked to be in great condition, I think it'd been rained on some if I remember right, plus the bearings felt like they'd be noisy. But I could never bring myself to fully get rid of it. So I just kept sitting on it, and it made the move over into my new space from my parents' old house, and just kept sitting. Recently with my pile of other new inventory dwindling, I started eyeing it again, and really decided it wasn't as bad as it looked. My new thing has been converting some of these Laskos to use Casablanca rod systems and generic mounting, just to make the single factory bracket I do have a little less in-demand, and be able to hang these things up with more ease. Plus, as we know, I prefer downrods. I mostly find them flush mounted, and adding a rod makes them more appealing to me. These days I have more of those spare parts on hand, where in the past I didn't, which is part of the shift I had toward reviving this one. It was actually feasible to have parts that would get it up on the ceiling. What a wonderful thing that relatively common Casa parts do work, it's a real lifesaver. I started cleaning it all up, and the motor turned out really beautifully. Looks almost brand new. Moved to the blades, and forgot that they'd been taped together, and since they'd been wet, the finish peeled off some spots on areas of both finish options, and the rest looked so good I didn't want to settle for subpar blades. I ended up pulling this Emerson set to use because it was the closest I could get to original in terms of a usable finish and their general shape. Again, incredible that like Emerson, the hole spacing for these never changed. They're a little narrower at the tips of course, so you kind of lose some of that signature Lasko look, but I actually don't mind the fact that they look immensely less saggy, and the performance is quite good with a little of the weight shaved off. I did keep the blades and may try to repaint them someday, but it's a project I couldn't prioritize now. I can't remember what light it had, but I think it was destroyed and I tossed it way back when. Whatever it was left some evidence of it being there on the switch housing, so while I would've simply preferred no light, it looks better with one. Just pulled a combo together that I thought would suit the 90s vibe. Surprisingly, it runs quite smooth and quiet. As mentioned, the way the motor felt turning by hand was one of the major things that kept this one on the back burner. Had a little noise on first run, but that faded after it ran for a bit. Kinda buzzy/hummy, but nothing I won't tolerate. Sorry this was a long one, but I wanted to explain all the intentional choices made. I knew it wouldn't be fully original anymore, but the result of a nice-looking, usable fan was really the appeal in the end and it looks really great.
Also, bonus. I'm going to use the original canopy from this one for my 42" white/brass Lasko, because that canopy has a rather crude hole drilled in one side. I assume they ran exterior wire or a swag kit in its past life. Not only does it not look nice, but it also makes it a pain to get the canopy onto the bracket, so I'm beyond excited to swap that out. That fan is also in really prime condition aside from that modification, so now it'll have an unaltered canopy to match.
Visit My Website: vintagefansandmore.com
VF&M Merch: shop.spreadshirt.com/vintagefansandmore
VF&M LinkedIn: linkedin.com/company/vfandm
Like VF&M on Facebook: facebook.com/vintagefansandmore
Follow me on Instagram: instagram.com/vfandm
Follow me on TikTok: tiktok.com/@vfandm
Follow me on Bluesky: https://bsky.app/profile/vfandm.bsky.social
Consider shopping my Amazon Recommendations to support my channel*: amazon.com/shop/vintagefansmore
#CeilingFan
*As an Amazon Associate I earn from qualifying purchases.










