Robert Cowan | Laser Marking 3d Printed Parts @RobertCowanDIY | Uploaded 6 months ago | Updated 1 hour ago
I wanted to use my fiber laser to mark 3d printed parts. I tested out pretty much every filament type I had and figured out all the right settings so you don't have to!

youtu.be/KKmpiMiHXjg?si=0wJ6kYpzGMjJF-Mh

Cloudray QS-50 from Cloudray official website (affiliate link) - shareasale.com/r.cfm?b=2362923&u=3943778&m=121439&urllink=&afftrack=

youtu.be/mGdaQX4TsgU

Hatchbox Matte PLA - amzn.to/4a6DCwH
Filamentum Extrafill PLA - matterhackers.com/store/c/fillamentum/fillamentum-extrafill-series?aff=7452
Bambu Basic PLA - store.bambulab.com/products/pla-basic-filament
Overture PLA - amzn.to/4aoDJU8
Bambu Matte PLA - store.bambulab.com/products/pla-matte-filament
Hatchbox PLA Pro - amzn.to/3JbexFj
Polymaker PolyLite PLA - amzn.to/3IShaM4
Prusament PLA - prusa3d.com/en/category/prusament-pla
Polymaker ASA - amzn.to/3IQSAej
Bambu PLA-CF - store.bambulab.com/collections/pla-1/products/pla-cf
Polymaker TPU - amzn.to/3vrTYAZ
Overture PETG - amzn.to/4aqKbtN
Matterhackers NylonX - matterhackers.com/store/l/nylonx-carbon-fiber-nylon-filament-1.75mm/sk/MD5LDGS7?aff=7452

My Favorite Tools - amazon.com/hz/wishlist/ls/26XWKXQK322W8?&tag=robertcowandi-20

00:00 Intro
01:00 Why Fiber Laser?
02:32 Filament Samples
03:08 Laser Settings
05:03 Laser Montage
06:24 PLA Results
07:47 CF, ASA, PETG Results
09:24 Calibration
10:35 Lessons Learned
12:22 Cloudray QS-50