Uploaded October 2015 | Updated September 2026, 49 minutes ago
Laser Cocktails
Several designs running (hard to film laser effects, contrast is more than camera can handle)
youtube.com/watch?v=hEPBKDRgkvI
youtube.com/watch?v=Is1Mqfr-o0o
youtube.com/watch?v=jlvnS_Yzb7o
youtube.com/watch?v=CmWvgyK8kd4
-Arduino
-wine glass
-cheap led lasers
-agitator (motor, pump, speaker, etc..)
-electret microphone (or audio signal direct input to arduino)
If you like, you might wanna check out my youtube channel
youtube.com/user/freedscript
and my artists website
dscript.org
Some very simple designs that use wine glasses and a teapot. this is more optics and visual design than anything. There are 2 levels to the design
A.Hardware - this is the agitator controlled by arduino system with electret microphone and the software that runs it. So many designs, and so many things that can be used. crystal wine glass, teapot, water glass, or any transparent vessel that can hold liquid.
B.Cocktail - The mix of liquid. So far the easy Water + oil is my fav. but you can add anything to change the physical/optical properties... glitter, gelatine powder, soap, etc..
Good for ambient music reactive decoration.
**TIP** take the lens off the led laser, it will give it a nice 90 degree or so beam, perfect for laser microscope effect at a short distance.
Music by ccmixer.org
If you like, you might wanna check out my youtube channel
youtube.com/user/freedscript
and my artists website
dscript.org
Keep on hacking :)
Laser Cocktails
Several designs running (hard to film laser effects, contrast is more than camera can handle)
youtube.com/watch?v=hEPBKDRgkvI
youtube.com/watch?v=Is1Mqfr-o0o
youtube.com/watch?v=jlvnS_Yzb7o
youtube.com/watch?v=CmWvgyK8kd4
-Arduino
-wine glass
-cheap led lasers
-agitator (motor, pump, speaker, etc..)
-electret microphone (or audio signal direct input to arduino)
If you like, you might wanna check out my youtube channel
youtube.com/user/freedscript
and my artists website
dscript.org
Some very simple designs that use wine glasses and a teapot. this is more optics and visual design than anything. There are 2 levels to the design
A.Hardware - this is the agitator controlled by arduino system with electret microphone and the software that runs it. So many designs, and so many things that can be used. crystal wine glass, teapot, water glass, or any transparent vessel that can hold liquid.
B.Cocktail - The mix of liquid. So far the easy Water + oil is my fav. but you can add anything to change the physical/optical properties... glitter, gelatine powder, soap, etc..
Good for ambient music reactive decoration.
**TIP** take the lens off the led laser, it will give it a nice 90 degree or so beam, perfect for laser microscope effect at a short distance.
Music by ccmixer.org
If you like, you might wanna check out my youtube channel
youtube.com/user/freedscript
and my artists website
dscript.org
Keep on hacking :)
