Uploaded March 2023 | Updated November 2026, 5 days ago
Due to recent corrosion and rust on our factory metal hard line brake pipes being an MOT advisory (worst area was on the rear chassis) we decided they needed replacing. Originally we had run the same type of pipe but after some research decided to go a different route to make the system more future proof and less maintenance (cleaning, greasing etc), so we went with stainless braided PTFE flexible brake hose from for the front and back runs, this is great because it won't rust, flexible so no bending and durable.
Routing the new lines was easy enough (existing area, clips or big cable ties etc), all compatible fittings are available which quick to fit, you must make sure they are fitted properly and tight to avoid leaks and ensure the system is safe the official video is here: youtube.com/watch?v=5tdsgZ-KfWI and the stainless braided hose can be cut easily with a decent pair of side cutters, just make sure the pipe is round after, the pipe should not rub on anything so using clips/hose and making sure it's secured properly is important as per MOT regulations. After everything is secure, it's time to bleed the brakes and check for leaks if you have any just tighten and check again.
We purchased all this from Car Builder Solutions, the hose and components are all very good quality and the service including delivery was fantastic, so we recommend them (not affiliated), thanks for watching and if you have any questions please ask.
Items we used:
STAINLESS BRAIDED FLEXIBLE PTFE BRAKE HOSE PER MTR:
carbuilder.com/uk/stainless-braided-flexible-ptfe-brake-hose-per-mtr
STRAIGHT SWIVEL FEMALE CONCAVE SEAT M10:
carbuilder.com/uk/straight-swivel-female-concave-seat-m10
STRAIGHT SWIVEL MALE CONVEX SEAT M10 X 1:
carbuilder.com/uk/straight-swivel-male-convex-seat-m10-x-1
STAINLESS STEEL M10 X 1 MALE BRAKE UNION:
carbuilder.com/uk/stainless-steel-m10-x-1-male-brake-union
STAINLESS STEEL P-CLIPS 6MM PACK OF 5:
carbuilder.com/uk/stainless-steel-p-clips-6mm
FLEXIBLE BRAKE PIPE UNIONS SELF-ASSEMBLY (all available fittings):
carbuilder.com/uk/flexible-brake-pipe-unions-self-assembly#/pageSize=20&viewMode=grid&orderBy=15
50 Pcs Zip Ties Heavy Duty Strong Large Cable Wire Ties Zip Ties Industrial Sturdy Wire Ties, Awnings Tying Branches Bundling of Crops Fixed Water Pipes(Black,24 inch x 7.9 mm):
amzn.to/41Jcro8
8mm ID Black 10 Metre Length Fuel and Oil Resistant Rubber Hose - AutoSilicon (rubber hose we used):
amzn.to/3L1zX9E
#td5 #discoverytd5 #discovery2
Due to recent corrosion and rust on our factory metal hard line brake pipes being an MOT advisory (worst area was on the rear chassis) we decided they needed replacing. Originally we had run the same type of pipe but after some research decided to go a different route to make the system more future proof and less maintenance (cleaning, greasing etc), so we went with stainless braided PTFE flexible brake hose from for the front and back runs, this is great because it won't rust, flexible so no bending and durable.
Routing the new lines was easy enough (existing area, clips or big cable ties etc), all compatible fittings are available which quick to fit, you must make sure they are fitted properly and tight to avoid leaks and ensure the system is safe the official video is here: youtube.com/watch?v=5tdsgZ-KfWI and the stainless braided hose can be cut easily with a decent pair of side cutters, just make sure the pipe is round after, the pipe should not rub on anything so using clips/hose and making sure it's secured properly is important as per MOT regulations. After everything is secure, it's time to bleed the brakes and check for leaks if you have any just tighten and check again.
We purchased all this from Car Builder Solutions, the hose and components are all very good quality and the service including delivery was fantastic, so we recommend them (not affiliated), thanks for watching and if you have any questions please ask.
Items we used:
STAINLESS BRAIDED FLEXIBLE PTFE BRAKE HOSE PER MTR:
carbuilder.com/uk/stainless-braided-flexible-ptfe-brake-hose-per-mtr
STRAIGHT SWIVEL FEMALE CONCAVE SEAT M10:
carbuilder.com/uk/straight-swivel-female-concave-seat-m10
STRAIGHT SWIVEL MALE CONVEX SEAT M10 X 1:
carbuilder.com/uk/straight-swivel-male-convex-seat-m10-x-1
STAINLESS STEEL M10 X 1 MALE BRAKE UNION:
carbuilder.com/uk/stainless-steel-m10-x-1-male-brake-union
STAINLESS STEEL P-CLIPS 6MM PACK OF 5:
carbuilder.com/uk/stainless-steel-p-clips-6mm
FLEXIBLE BRAKE PIPE UNIONS SELF-ASSEMBLY (all available fittings):
carbuilder.com/uk/flexible-brake-pipe-unions-self-assembly#/pageSize=20&viewMode=grid&orderBy=15
50 Pcs Zip Ties Heavy Duty Strong Large Cable Wire Ties Zip Ties Industrial Sturdy Wire Ties, Awnings Tying Branches Bundling of Crops Fixed Water Pipes(Black,24 inch x 7.9 mm):
amzn.to/41Jcro8
8mm ID Black 10 Metre Length Fuel and Oil Resistant Rubber Hose - AutoSilicon (rubber hose we used):
amzn.to/3L1zX9E
#td5 #discoverytd5 #discovery2










