Making Up Stainless Steel Braided Brake Hoses With Our Self Assembly FittingsCar Builder Solutions2016-09-07 | A brief video describing the assembly of our re-useable brake pipe fittings and Stainless Steel braided PTFE hose.
Spanners and Hand Tools: carbuilder.com/uk/hand-tools#/pageSize=20&viewMode=grid&orderBy=0Automatic Lights ON and OFF ControllerCar Builder Solutions2022-01-20 | Automatically switch on your lights at dusk or in tunnels. This little device has a remote photosensor and a 10 Amp solid state, 12 volt relay which will automatically switch on your sidelights and/or dipped beam when ambient light inside the vehicle drops to a preset level.
Here's a black powder-coated, floor-mounted pedal box, nicely made from 2mm and 3mm steel.
Both brake and clutch pedals pivot on nylon bushes.
The clear-anodised aluminium throttle pedal has an adjustable stop, an adjustable link and a sliding clamp for the inner cable fixing,
offering maximum flexibility and adjustment. There is no hole for the outer cable. This must be drilled to suit your installation and cable choice.
There are two 37mm holes for master cylinders. All of our standard, Integral Reservoir and Non-Reservoir cylinders will fit.
The brake pedal has an integral 26mm I.D. balance bar tube.
The sprung-return clutch pedal cam is adjustable and has a maximum stroke of 50mm.
The clutch outer cable is mounted on a bolted-on rear frame which is undrilled leaving you to select hole size and position depending on your choice of cable.
#PEDBOX3Slide LatchCar Builder Solutions2021-10-14 | ABS Slide Latch Panel Ideal for glove glovebox, storage or access panels.SLSS Sliding LatchCar Builder Solutions2021-10-14 | ...Bolt in Hose OutletsCar Builder Solutions2021-10-14 | ...DIGISTAT Instruction DemonstrationCar Builder Solutions2021-10-14 | Suitable for cooling fans or water pumps up to 4 Amps maximum current rating. An adjustable temperature thermostat with a digital readout.Push Button Release LatchCar Builder Solutions2021-10-14 | A discreet, precision-engineered latch for bonnets, glove box and any other opening panels. carbuilder.com/uk/push-button-release-latchHow to bend, cut and straighten copper brake pipeCar Builder Solutions2021-05-11 | A collection of our brake pipe benders.
#BPBEND - for 3/16 copper brake pipe. #BPBEND3 - for 3mm, 5mm and 6mm #TUBEND - for 6mm, 8mm and 10mm #BPBEND2 - Adjustable 5mm to 10mmFitting Bear Claw Door LatchesCar Builder Solutions2021-03-26 | Our Bear Claw, anti-burst door latches are probably the easiest-to-fit latches you will ever find. A simple release mechanism makes it easy to connect internal door opening handles or ‘pull cables and outside push-buttons.Modular Wiring SystemCar Builder Solutions2020-06-24 | We show you the components of our Modular Wiring System and how to assemble them into the heart of your vehicle's wiring loom. carbuilder.com/uk/modular-fuse-and-relay-box-systemHow make copper brake pipes using a hand held brake pipe flare tool and pipe straighter.Car Builder Solutions2020-03-20 | A short video showing the easy to use tool that’s great for flaring brake pipes in-situ on the vehicle or on the bench.
They pair nicely with our Rally Window Nets #WNET, also available in the same 7 colours, so that you can kit out your interior well: carbuilder.com/rally-window-netForeman CanAm InterviewCar Builder Solutions2019-08-15 | A throwback to Neil having a chat about our CanAm P4 with Richard Hammond and Men and Motors. Matt and Neil built this Ferrari P4 replica themselves and it was an absolute beast once you put your foot down!Threads and how to measure themCar Builder Solutions2019-07-24 | Learn to identify and choose the right thread using a digital measuring caliper, thread gauge with imperial and metric along with a thread chart.
Thread gauge: carbuilder.com/uk/thread-gaugeHow to install an Electric Vacuum PumpCar Builder Solutions2019-06-24 | Many high performance engines do not produce enough vacuum for reliable servo operation.
This neat little pump will maintain 18-22 inches of constant vacuum whatever your manifold pressure.
Inlet and solenoid hosetails are 12mm diameter and the exhaust is 14mm diameter.
Checkout our rear fog lights here: carbuilder.com/uk/lighting-rear-fog-lights We have a large selection for you to choose from.What is a rivnut and how do you install them?Car Builder Solutions2018-10-11 | This video will teach you what a RivNut is and the best ways in which they should be installed.
Checkout our range of stainless steel, aluminium, rubber and steel RivNuts available for you to purchase here: carbuilder.com/uk/rivnutsAssembling a 7 HeadlampCar Builder Solutions2018-10-11 | Here Neil will show you how to assemble our 7" headlamp.
Checkout our full range of headlamps here: carbuilder.com/uk/headlampsHow a car speedo works.Car Builder Solutions2018-09-05 | Here Neil gives a basic explanation of how a car speedo works for you to enjoy.
Here you can checkout our full range of gauges and gauge pods now that you know how they work! carbuilder.com/uk/interior-gauges-and-gauge-podsFitting a Wiper GearCar Builder Solutions2018-09-03 | This video shows you how to fit or even replace the drive gear in our wiper motors.
Find our wiper gears for 95 to 140 degree wipers here, as well as our other wiper parts: carbuilder.com/uk/wiper-partsCBS Windscreen Wiper Kit InstallationCar Builder Solutions2016-11-10 | How to fit our Windscreen Wiper Kit
Chrome Wheelbox Nut http://www.carbuildersolutions.com/uk/chrome-nut-for-wiper-wheelboxDZUS Fasteners ExplainedCar Builder Solutions2016-10-21 | A brief video showing the methods of measuring and fitting a DZUS Fastener. Find many different styles and lengths on our website www.carbuildersolutions.comCBS 12 Circuit Wiring Module - Wiring Made EasyCar Builder Solutions2016-09-08 | The Heart of a custom loom for your car. Vehicle wiring doesn't get a lot easier than this. Our wiring module has the difficult bit already done for you. Correct rating fuses on all circuits. Indicator and Hazard flasher relays. Horn relay. Fan relay. Pre-drilled aluminium mounting plate. Easy to follow instructions and diagrams. Just mount the module under your dash or in your engine bay and run the correct size cables from your ancillaries and switches to the unit's screw terminals.
They fit through a rectangular cut out of 22x30mm and have a rear projection of approximately 43mm.
The main connections on the switch are 3mm diameter pins and these 4.8mm spades are for the illumination. This can be wired in two ways. You can wire a loop from the output of the switch so it illuminates when you turn or it can be wired to your headlamp switch so it turns on with your lights.
These are available in 4 plain colours. Red blue green and yellow and many different functions. Details of which can be found on our website: http://www.carbuildersolutions.com/uk/rocker-switchesBillet Aluminium Push Button Dashboard SwitchesCar Builder Solutions2014-02-05 | These switches are available from www.carbuildersolutions.com. http://www.carbuildersolutions.com/uk/electrical-billet-aluminium-switches The terminals for wiring these switches are also available from our site. #TER185F along with a step cutter #STEP6 which will cut perfect holes for installation. We also sell a small wiring loom to wire so the lamp illuminates with your headlamps and is brighter when turned on #BSWDIM
These popular billet aluminium switches bring any dashboard right up to date. The brushed finish looks excellent on any dashboard construction and the two mounting options make them quite versatile. They can be flush or surface mounted through either a 15mm or 22mm hole and have a rear projection of 51mm or 40mm in each instance. They are available in four illumination colours, red, blue, yellow and green and numerous different legends.
The illumination in the switches is a separate circuit so you can choose if it lights when you turn the switch on or, with your headlamps, but do ensure that you use terminal 'A' as the feed because the bulb is LED and will not light if wired the wrong way. With the exception of the hazard warning switch all are supplied with a single pole changeover switch block.Aero Style Fuel Filler 82mm AERO2Car Builder Solutions2014-02-05 | This great value Aero style fuel cap is IVA compliant straight out the box. The key is retained when you unlock it which means you don't have to tether the cap and the general construction complies with all radius regulations. It is available in both vented and unvented versions and both are machined to accept the unleaded nozzle restrictor. The built in neck is 51mm and the outside diameter of the cap is 82mm. It has six fixing holes on a PCD of 70mm . It fits through a 57mm hole and has a rear projection of 50mm. Six stainless steel nuts and bolts and a cork gasket are supplied with the cap.
We can also supply various fixed length fuel filler hoses and a ultra flexible fuel filler hose in 500mm multiples up to 4m.