Uploaded October 2026 | Updated November 2026, 23 hours ago
Ladder and structured text share the same PLC memory: the same X, Y, C, AX and AY registers, the same 3D scenes and the same Modbus bridge in both modes.
โก QUICK ANSWER
Ladder and structured text in the ACC PLC Simulator are two editors over one memory model. The same X, Y, C, AX and AY registers work in both, so a 3D scene you connected in ladder mode runs identically in ST mode with the same I/O addresses, and the Modbus bridge needs no change either. You write in one language at a time, switched with a button in the toolbar, and the simulator remembers which mode you were in across reloads. That shared model is also the fastest way to learn structured text: build something in ladder, switch mode, and read the same logic as text against the same addresses. Nothing to rebuild and nothing to reconnect - only the language changes. Full guide on the blog.
๐ FULL WRITTEN GUIDE
accautomation.ca/acc-plc-simulator-how-to-use-structured-text-st-programming
๐ฅ๏ธ OPEN THE SIMULATOR AND PRESS ST
accautomation.ca/simulator
โถ WATCH THE FULL VIDEO
youtu.be/B0UDgJnE3DQ
๐ WHAT YOU'LL LEARN
โ Understand the shared I/O model - X, Y, C, AX and AY mean exactly the same thing in ladder and in structured text
โ Keep a 3D scene you already connected in ladder mode and run it from an ST program with no changes to the addresses
โ Keep the Modbus bridge working unchanged, so a real PLC driving a scene does not care which language you wrote
โ Switch modes from the toolbar, with the choice remembered the next time you load the simulator
โ Use the comparison deliberately - write a rung in ladder, switch to ST, and read the same logic two ways
โ FREQUENTLY ASKED
Q: If I switch to structured text, do I have to redo my I/O or my scene?
A: No. The registers, the 3D scenes, the Modbus bridge and the gamepad all behave identically. One language at a time, but one memory model underneath, so nothing needs reconnecting.
Q: What is the easiest way to learn structured text if I only know ladder?
A: Build something small in ladder, then switch to ST mode and write the same thing against the same addresses. Comparing the two versions of logic you already understand teaches it far faster than starting from syntax rules.
๐ The full guide, with every statement and function block: accautomation.ca/acc-plc-simulator-how-to-use-structured-text-st-programming
๐ MORE RESOURCES
โถ Try the free simulator: accautomation.ca/simulator
โถ How I learned structured text in the simulator: youtu.be/B0UDgJnE3DQ
โถ PLC Beginners Guide: accautomation.ca/programming/plc-beginners-guide
โถ Free eBooks: accautomation.ca (subscribe for download)
๐ RECOMMENDED HARDWARE
โถ Shop: automationdirect.com
โถ Parts Guide: accautomation.ca/purchase-find-parts
๐ฌ Questions? Drop a comment below.
๐ New tutorials every Monday โ Subscribe and hit the bell!
#PLC #LadderLogic #IndustrialAutomation #PLCProgramming #ACCAutomation #StructuredText #IEC61131 #PLCSimulator #LearnPLC #Shorts
Regards,
Garry
ACC Automation
accautomation.ca
Ladder and structured text share the same PLC memory: the same X, Y, C, AX and AY registers, the same 3D scenes and the same Modbus bridge in both modes.
โก QUICK ANSWER
Ladder and structured text in the ACC PLC Simulator are two editors over one memory model. The same X, Y, C, AX and AY registers work in both, so a 3D scene you connected in ladder mode runs identically in ST mode with the same I/O addresses, and the Modbus bridge needs no change either. You write in one language at a time, switched with a button in the toolbar, and the simulator remembers which mode you were in across reloads. That shared model is also the fastest way to learn structured text: build something in ladder, switch mode, and read the same logic as text against the same addresses. Nothing to rebuild and nothing to reconnect - only the language changes. Full guide on the blog.
๐ FULL WRITTEN GUIDE
accautomation.ca/acc-plc-simulator-how-to-use-structured-text-st-programming
๐ฅ๏ธ OPEN THE SIMULATOR AND PRESS ST
accautomation.ca/simulator
โถ WATCH THE FULL VIDEO
youtu.be/B0UDgJnE3DQ
๐ WHAT YOU'LL LEARN
โ Understand the shared I/O model - X, Y, C, AX and AY mean exactly the same thing in ladder and in structured text
โ Keep a 3D scene you already connected in ladder mode and run it from an ST program with no changes to the addresses
โ Keep the Modbus bridge working unchanged, so a real PLC driving a scene does not care which language you wrote
โ Switch modes from the toolbar, with the choice remembered the next time you load the simulator
โ Use the comparison deliberately - write a rung in ladder, switch to ST, and read the same logic two ways
โ FREQUENTLY ASKED
Q: If I switch to structured text, do I have to redo my I/O or my scene?
A: No. The registers, the 3D scenes, the Modbus bridge and the gamepad all behave identically. One language at a time, but one memory model underneath, so nothing needs reconnecting.
Q: What is the easiest way to learn structured text if I only know ladder?
A: Build something small in ladder, then switch to ST mode and write the same thing against the same addresses. Comparing the two versions of logic you already understand teaches it far faster than starting from syntax rules.
๐ The full guide, with every statement and function block: accautomation.ca/acc-plc-simulator-how-to-use-structured-text-st-programming
๐ MORE RESOURCES
โถ Try the free simulator: accautomation.ca/simulator
โถ How I learned structured text in the simulator: youtu.be/B0UDgJnE3DQ
โถ PLC Beginners Guide: accautomation.ca/programming/plc-beginners-guide
โถ Free eBooks: accautomation.ca (subscribe for download)
๐ RECOMMENDED HARDWARE
โถ Shop: automationdirect.com
โถ Parts Guide: accautomation.ca/purchase-find-parts
๐ฌ Questions? Drop a comment below.
๐ New tutorials every Monday โ Subscribe and hit the bell!
#PLC #LadderLogic #IndustrialAutomation #PLCProgramming #ACCAutomation #StructuredText #IEC61131 #PLCSimulator #LearnPLC #Shorts
Regards,
Garry
ACC Automation
accautomation.ca










