Retro Tech & Electronics | Jura Automatic Coffee Machine - Stop Wasting your money on Milk Frother Cleaning Supplies @retrotechandelectronics | Uploaded December 2022 | Updated October 2024, 6 hours ago.
I had started drinking significantly more milk inclusive coffee selections since moving to the new machine as of late, though while I don't mind the added maintenance that comes along with it, I have noted the added cost. What bothers me is the apparent waste in the process that is found in an already expensive requirement for a Jura branded cleaning product. Its easy to see looking back from my initial review of the unit and the changeover from liquid to the pellets that its not getting cheaper. Evaluating the cost and the total uses per item we can see what were dealing with for daily maintenance.
We find that cost aside, its not being use effectively nor efficiently, and were actually dumping money down the drain as demonstrated specifically in the video. A variety of tests and measurements are conducted to find out how efficiency can be drastically improved.
Finally, everything will be disassembled and inspected to ensure that the cleaning regiment is still working as intended.
Tested with:
Jura Milk System Cleaner Mini-Tabs w/Dispenser (180 g bottle)
amzn.to/3YH4LQr
Jura S8 Automatic Coffee Machine 64 oz
amzn.to/3M9jLSS
ZeroWater 32 Cup Ready-Read 5-Stage Water Filter Dispenser, NSF Certified
amzn.to/41P95P7
#capuccino #jura #kaffeevollautomat
I had started drinking significantly more milk inclusive coffee selections since moving to the new machine as of late, though while I don't mind the added maintenance that comes along with it, I have noted the added cost. What bothers me is the apparent waste in the process that is found in an already expensive requirement for a Jura branded cleaning product. Its easy to see looking back from my initial review of the unit and the changeover from liquid to the pellets that its not getting cheaper. Evaluating the cost and the total uses per item we can see what were dealing with for daily maintenance.
We find that cost aside, its not being use effectively nor efficiently, and were actually dumping money down the drain as demonstrated specifically in the video. A variety of tests and measurements are conducted to find out how efficiency can be drastically improved.
Finally, everything will be disassembled and inspected to ensure that the cleaning regiment is still working as intended.
Tested with:
Jura Milk System Cleaner Mini-Tabs w/Dispenser (180 g bottle)
amzn.to/3YH4LQr
Jura S8 Automatic Coffee Machine 64 oz
amzn.to/3M9jLSS
ZeroWater 32 Cup Ready-Read 5-Stage Water Filter Dispenser, NSF Certified
amzn.to/41P95P7
#capuccino #jura #kaffeevollautomat
![Sears Silvertone Twin Twelve 1484 Major Restoration Project [3/6]](https://i.ytimg.com/vi/SAU2KmtoJUQ/hqdefault.jpg "Sears Silvertone Twin Twelve 1484 Major Restoration Project [3/6]
Here in part 3 we continue with preparation with turn-up by installing the pot needed for the hum balance which replaces the filament center tap. After this a dry run without tubes is conducted just to be sure everything is ok. If the tap cant meet 6.3 without tubes it cant be the right tap and i have to switch to the next one. Given the one at around 7 volts its time to add the tubes to the amp.
With all of the tubes in the amp we come to find that the final filament voltage is 5.9. It looks like another turn or two will be needed out of that transformer. A retest with 2.5 wraps shows 6.2 volts at 120vac.
Following this The temperature gun will be used to measure the heat off of the transformer after 30 minutes or so. No heat issues were found. To celebrate, the transformer covers were stripped and painted, as well as the rewiring of the reverb tank.
I break out the impedance bridge to test the cabinet and confirm the impedance at 8 ohms.
I found an extra speaker jack that was inappropriately added to this cabinet that I could remove to place the hum pot into. After that, its time for the first full smoke test.
I wish this amp had an adjustable bias..... also I discover at this time that the standby circuit is garbage. I end up having to use several tubes from Cornerstone music to find something that operates within safe parameters.
This brings the project into the noise isolation phase. and there is no shortage of noise in this amp; all sorts of different types of noise from different stages.
This starts from the finals backwards to the phase inverters. Where things are already looking strange.
#retrotechandelectronics #vintagetubeamprepairs")
