Uploaded June 2020 | Updated November 2026, 11 hours ago
In this second episode of Joinery Class, I build a Cogged Lap Joint. This is a variant of a half lap joint that is much stronger because less material is removed from the support beam. There is also more strength against racking because of the additional shoulders in the joint.
The Cogged Lap Joint is often used in Japanese temple construction to support purlins on rafters or floor joists to bottom plates.
You can download free plans for this joint here:
bobswoodstuff.com/downloads/cogged-lap-joint-plans
You can download my other joinery plans here:
bobswoodstuff.com/joinery-plans
Tools used in this project: Amazon (affiliate links)
--------------------------------------------------------------------
Mini Dozuki saw
amzn.to/2X3Pqgc
2" Marples chisel
amzn.to/2PIoz69
1-1/4" Irwin Marples Chisel
amzn.to/2X4jsAl
1/2" Marples Chisel
amzn.to/3emt5Aa
Empire 6" combination square
amzn.to/2C8hxjb
------------------------------------------------------------------
Website: bobswoodstuff.com
Instagram: instagram.com/bobswoodstuff
----------------------------------------------------------------
0:00 Cogged Lap Joint
0:49 Marking the Lower Piece
2:32 Making the Knife Wall
3:26 Sawing the Shoulders
4:18 Chiseling out the Waste
6:15 Hand Planing to Fit
8:03 Marking the Upper Piece
9:57 Sawing the Upper Piece
10:57 Chiseling out the Waste
In this second episode of Joinery Class, I build a Cogged Lap Joint. This is a variant of a half lap joint that is much stronger because less material is removed from the support beam. There is also more strength against racking because of the additional shoulders in the joint.
The Cogged Lap Joint is often used in Japanese temple construction to support purlins on rafters or floor joists to bottom plates.
You can download free plans for this joint here:
bobswoodstuff.com/downloads/cogged-lap-joint-plans
You can download my other joinery plans here:
bobswoodstuff.com/joinery-plans
Tools used in this project: Amazon (affiliate links)
--------------------------------------------------------------------
Mini Dozuki saw
amzn.to/2X3Pqgc
2" Marples chisel
amzn.to/2PIoz69
1-1/4" Irwin Marples Chisel
amzn.to/2X4jsAl
1/2" Marples Chisel
amzn.to/3emt5Aa
Empire 6" combination square
amzn.to/2C8hxjb
------------------------------------------------------------------
Website: bobswoodstuff.com
Instagram: instagram.com/bobswoodstuff
----------------------------------------------------------------
0:00 Cogged Lap Joint
0:49 Marking the Lower Piece
2:32 Making the Knife Wall
3:26 Sawing the Shoulders
4:18 Chiseling out the Waste
6:15 Hand Planing to Fit
8:03 Marking the Upper Piece
9:57 Sawing the Upper Piece
10:57 Chiseling out the Waste










