Making a Plant Stand with Half Lap and Angled Bridle Joint - with plans @BobsWoodStuff
Making a Plant Stand with Half Lap and Angled Bridle Joint - with plans  @BobsWoodStuff
Uploaded November 2019 | Updated November 2026, 1 day ago
In this video I go through step by step how I made the plant stand. This is a good project to learn or practice the Lap Joint and the Angled Shoulder Bridle Joint. I go through some detail about common issues making the joints, and tips on how to accurately mark and cut the joints on the table saw and with hand tools.

You can purchase plans for this plant stand on my website here:
bobswoodstuff.com/downloads/plant-stand-with-angled-bridle-joint-plans

Products used (affiliate links):
-----------------------------------------------------------
Titebond III: amzn.to/36Huizg
Pony woodworking vise: amzn.to/2RjR5cU
Kreg bench dogs: amzn.to/2IqeG8X
2" Marples chisel: amzn.to/2PIoz69
2" Marples chisel (cheaper): amzn.to/36zjlQ0
Empire 6" combination square: amzn.to/2C8hxjb

My website: bobswoodstuff.com
Instagram: instagram.com/bobswoodstuff

Other tools I like to use: (affiliate links)
-----------------------------------------------------------
Empire 6" combination square: amzn.to/2C8hxjb
Stanley 12' tape measure: amzn.to/2p0Df5I
2" Marples chisel: amzn.to/2PIoz69
2" Marples chisel (Sheffield): amzn.to/36zjlQ0

Pony woodworking vise: amzn.to/2RjR5cU
Kreg bench dogs: amzn.to/2IqeG8X

Tascam lavalier mic w/ recorder: amzn.to/2NRoOcz
Big Buld LED - 4275 lumens: amzn.to/2CoRT9M
Big Bulb LED - 2570 lumens: amzn.to/36ITK7q

2-sided Japanese rip/crosscut saw: amzn.to/2JYBxZT
Single Edge Z-saw Japanese saw: amzn.to/2CmYn97
Replacement blade for Z-saw: amzn.to/2qtpOvv

SawStop Jobsite Saw: amzn.to/2PW5RrG
SawStop brake for 10" blades: amzn.to/2WS9PDp
SawStop brake for 8" dado stacks: amzn.to/32jTQ1S
Diablo 10" combination saw blade: amzn.to/2NnxuIs
Diablo 8" dado stack: amzn.to/36IqZHS

Porter Cable 2-1/4 hp router: amzn.to/2NOQHBV

Titebond I - 1 quart: amzn.to/2oUrFZI
Titebond II - 1 quart: amzn.to/2NM0GIl
Titebond III - 16oz: amzn.to/36Huizg
Making a Plant Stand with Half Lap and Angled Bridle Joint - with plansMaking a Portable Chopping Stump from a 4x4Shop Vac Filter Hack - LeggingsMaking an Abrasive Cat Scratching PostDIY Acoustic Skyline Diffuser - WALL ARTMaking plywood gears with my desktop laserMaking an Octagon on the Table SawFixing a Damaged GateElegant Leaning Planter from FENCE BOARDS and 2x6Building a Quick Change ViseJoinery Class Ep 1: 3-way Lap Joint12 Minutes of Dice Tumbling
Bobs Wood Stuff |

Making a Plant Stand with Half Lap and Angled Bridle Joint - with plans

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER