Uploaded May 2026 | Updated September 2026, 2 weeks ago
JAYO sent over their new Galaxy PLA on their updated 2-piece reusable spool, and this one is more than just shiny filament.
The new spool design fits systems like the Bambu A1 / A1 Mini AMS and Snapmaker U1 spool holders without needing a printed adapter, which is a huge quality-of-life improvement if you actually use these machines every day.
In this video, I run JAYO Galaxy PLA through my normal EDGE OF 3D material testing workflow, including:
Layer adhesion testing
X-axis strength testing
Izod-style impact testing
Print quality examples
Real-world model prints
Spool compatibility discussion
This is not a standardized lab certification. This is my repeatable, comparative testing setup designed to show how materials perform against each other using the same print standards and the same test methods.
No marketing fluff. Print it, break it, measure it, and see what survives.
=============================
JAYO GALAXY PLA / LINKS
Jayo Galaxy PLA:
jayo3d.com/collections/reusable-spool/products/reusable-spooljayo-pla-galaxy-3d-printer-filament-1-75mm-glitter-sparkle-pla-colorful-twinkling-1-1kg-galaxy-green-black-purple-for-fdm-printer
Jayo Amazon Store Affiliate Link:
amzn.to/4eyu3vI
=============================
TESTING DATA & CHANNEL SUPPORT
Materials Testing Chart:
testing.eo3dlabs.com
Support the testing on Ko-fi:
ko-fi.com/edgeof3d
=============================
SPECIAL THANKS
The Jerry Show / 3DHP:
youtube.com/@3DHP
=============================
MODELS USED
Burj Khalifa:
makerworld.com/en/models/54366-burj-khalifa#profileId-56094
Puzzle Box:
makerworld.com/en/models/95054-enigma-puzzle-box#profileId-110127
Desk Organizer:
makerworld.com/en/models/2822260-desktop-organizer-no-support-print-in-place?from=search#profileId-3143279
Desk Organizer #2 / HexaStack Modular Organizer:
makerworld.com/en/models/2825677-hexastack-modular-organizer-vanity-desk-storage?from=search#profileId-3147682
=============================
VORON STANDARD TESTING PROFILE
Voron Standard:
0.2 mm layer height
0.4 mm forced line width
4 walls
5 top / bottom layers
40% infill
Infill used depending on test/model: Grid, Gyroid, Honeycomb, Triangle, or Cubic
=============================
STAY CONNECTED
YouTube:
youtube.com/c/EDGEOF3D
Instagram:
instagram.com/edgeof3d
TikTok:
tiktok.com/@edge_of_3d
=============================
#JAYO #JAYOFilament #GalaxyPLA #PLA #3DPrinting #FilamentTesting #MaterialTesting #3DPrinterFilament #BambuA1 #BambuLab #SnapmakerU1 #Voron #EdgeOf3D #EO3D #IzodTest #LayerAdhesion #3DPrintingMaterials
JAYO sent over their new Galaxy PLA on their updated 2-piece reusable spool, and this one is more than just shiny filament.
The new spool design fits systems like the Bambu A1 / A1 Mini AMS and Snapmaker U1 spool holders without needing a printed adapter, which is a huge quality-of-life improvement if you actually use these machines every day.
In this video, I run JAYO Galaxy PLA through my normal EDGE OF 3D material testing workflow, including:
Layer adhesion testing
X-axis strength testing
Izod-style impact testing
Print quality examples
Real-world model prints
Spool compatibility discussion
This is not a standardized lab certification. This is my repeatable, comparative testing setup designed to show how materials perform against each other using the same print standards and the same test methods.
No marketing fluff. Print it, break it, measure it, and see what survives.
=============================
JAYO GALAXY PLA / LINKS
Jayo Galaxy PLA:
jayo3d.com/collections/reusable-spool/products/reusable-spooljayo-pla-galaxy-3d-printer-filament-1-75mm-glitter-sparkle-pla-colorful-twinkling-1-1kg-galaxy-green-black-purple-for-fdm-printer
Jayo Amazon Store Affiliate Link:
amzn.to/4eyu3vI
=============================
TESTING DATA & CHANNEL SUPPORT
Materials Testing Chart:
testing.eo3dlabs.com
Support the testing on Ko-fi:
ko-fi.com/edgeof3d
=============================
SPECIAL THANKS
The Jerry Show / 3DHP:
youtube.com/@3DHP
=============================
MODELS USED
Burj Khalifa:
makerworld.com/en/models/54366-burj-khalifa#profileId-56094
Puzzle Box:
makerworld.com/en/models/95054-enigma-puzzle-box#profileId-110127
Desk Organizer:
makerworld.com/en/models/2822260-desktop-organizer-no-support-print-in-place?from=search#profileId-3143279
Desk Organizer #2 / HexaStack Modular Organizer:
makerworld.com/en/models/2825677-hexastack-modular-organizer-vanity-desk-storage?from=search#profileId-3147682
=============================
VORON STANDARD TESTING PROFILE
Voron Standard:
0.2 mm layer height
0.4 mm forced line width
4 walls
5 top / bottom layers
40% infill
Infill used depending on test/model: Grid, Gyroid, Honeycomb, Triangle, or Cubic
=============================
STAY CONNECTED
YouTube:
youtube.com/c/EDGEOF3D
Instagram:
instagram.com/edgeof3d
TikTok:
tiktok.com/@edge_of_3d
=============================
#JAYO #JAYOFilament #GalaxyPLA #PLA #3DPrinting #FilamentTesting #MaterialTesting #3DPrinterFilament #BambuA1 #BambuLab #SnapmakerU1 #Voron #EdgeOf3D #EO3D #IzodTest #LayerAdhesion #3DPrintingMaterials
