Uploaded April 2026 | Updated September 2026, 2 weeks ago

---

Unannealed HT-PLA-GF failed first.
ASA held longer.
Annealed HT-PLA-GF made it all the way to the end before finally letting go.

This oven run tested 5 materials total, with 3 featured in the timelapse:
- Polymaker HT-PLA-GF, unannealed
- LDO ASA
- Polymaker HT-PLA-GF, annealed

Same oven run. Same load. Same test setup.

The takeaway is pretty clear: annealing changed the result in a big way.

=============================

FULL MATERIAL TEST TABLES:
react-ivn1sokr.stackblitz.io

SUPPORT THE CHANNEL:
ko-fi.com/edgeof3d

POLYMAKER AFFILIATE LINK:
us.polymaker.com/?aff=226

SUBSCRIBE:
youtube.com/@EDGEOF3D/?sub_confirmation=1

=============================

This is not a certified lab test. This is my repeatable, practical, real-world comparison method for seeing how printed materials behave under controlled heat/load conditions.

TLAR testing:
That Looks About Right.

=============================

#3DPrinting #MaterialsTesting #FilamentTesting #Polymaker #HTPLA #PLA #ASA #Annealing #3DPrintTesting #FunctionalPrinting #EDGEof3D #EDGEOF3D