Uploaded June 2022 | Updated September 2026, 2 days ago
Check out PART 1 of rescuing this Old Loader HERE:
youtube.com/playlist?list=PLYawuZlnembuutUYYdnSMVr8gCoesMyvh
Today the plan is to dive DEEP into the fuel system and see why we aren't getting fuel to the injectors!
We'll completely disassemble the 6 cylinder Stanadyne Injection pump, and see what is going on inside of it! This isn't a rebuild, as much as it's a cleaning and inspection of the pump to see if we can get it running without spending any money on it!
Then I'll give you a quick tour of Salvage Workshop, and you can see where it ALL began! A LOT has changed in the shop!
~
This old loader is a 1965 Allis Chalmers TL645 Wheel Loader with an Allis Chalmers 3500 turbo charged 6 cylinder diesel engine. It has an Allison automatic transmission, and can reach speeds of 21MPH going forward! It is articulated and can make VERY tight turns, making it very nimble in tight places. It weighs about 26000 lbs or so, and it's a PERFECT sized machine for all the random things I do!
Join me on this journey as we work together to figure out what it's going to take to get this machine back up and running once again! This will be a daily account of the process showing a bit more of what is takes to properly bring this old beast back to life and make it usable once again!
This machine should be a LOT of fun!
~
Thanks as always for watching and following along with all my crazy adventures here on Salvage Workshop, I TRULY appreciate it!
Please enjoy! I know I did!
~
Salvage Workshop Playlist FULL of other Heavy Equipment Rescues and Repairs - youtube.com/playlist?list=PLYawuZlnembv8NPpUqTUOJNzy6V7QJId0
Dragging a Forgotten Skid Steer from NATURE's Grip - youtu.be/jgvaZHV71_8
Have you seen my 1956 Caterpillar Track Loader "Old Red"? - youtu.be/MlN9gqQtTs8
Saving the Broke Down Backhoe - youtu.be/vWjNICbYOvY
I built a Deck with a TRAP DOOR - youtu.be/xvK6zQV7_d4
Rescuing an AMAZING Anvil buried in a collapsing garage - youtu.be/P_wZ5a-OlWQ
Touring the MACHINES at the Forgotten Junk Yard - youtu.be/2UlhIWKv-A8
~
0:00 - Video Introduction
2:09 ~ Checking the fuel supply
7:30 ~ Removing the housing
15:08 ~ Working on the injection pump and all the various parts
1:05:00 ~ Quick shop tour
~
If you have any suggestions, questions, or comments, please leave them below!
Thanks for stopping by, I truly appreciate your support!
#InjectionPumpProblems #AllisChalmers #SalvageWorkshop
Check out PART 1 of rescuing this Old Loader HERE:
youtube.com/playlist?list=PLYawuZlnembuutUYYdnSMVr8gCoesMyvh
Today the plan is to dive DEEP into the fuel system and see why we aren't getting fuel to the injectors!
We'll completely disassemble the 6 cylinder Stanadyne Injection pump, and see what is going on inside of it! This isn't a rebuild, as much as it's a cleaning and inspection of the pump to see if we can get it running without spending any money on it!
Then I'll give you a quick tour of Salvage Workshop, and you can see where it ALL began! A LOT has changed in the shop!
~
This old loader is a 1965 Allis Chalmers TL645 Wheel Loader with an Allis Chalmers 3500 turbo charged 6 cylinder diesel engine. It has an Allison automatic transmission, and can reach speeds of 21MPH going forward! It is articulated and can make VERY tight turns, making it very nimble in tight places. It weighs about 26000 lbs or so, and it's a PERFECT sized machine for all the random things I do!
Join me on this journey as we work together to figure out what it's going to take to get this machine back up and running once again! This will be a daily account of the process showing a bit more of what is takes to properly bring this old beast back to life and make it usable once again!
This machine should be a LOT of fun!
~
Thanks as always for watching and following along with all my crazy adventures here on Salvage Workshop, I TRULY appreciate it!
Please enjoy! I know I did!
~
Salvage Workshop Playlist FULL of other Heavy Equipment Rescues and Repairs - youtube.com/playlist?list=PLYawuZlnembv8NPpUqTUOJNzy6V7QJId0
Dragging a Forgotten Skid Steer from NATURE's Grip - youtu.be/jgvaZHV71_8
Have you seen my 1956 Caterpillar Track Loader "Old Red"? - youtu.be/MlN9gqQtTs8
Saving the Broke Down Backhoe - youtu.be/vWjNICbYOvY
I built a Deck with a TRAP DOOR - youtu.be/xvK6zQV7_d4
Rescuing an AMAZING Anvil buried in a collapsing garage - youtu.be/P_wZ5a-OlWQ
Touring the MACHINES at the Forgotten Junk Yard - youtu.be/2UlhIWKv-A8
~
0:00 - Video Introduction
2:09 ~ Checking the fuel supply
7:30 ~ Removing the housing
15:08 ~ Working on the injection pump and all the various parts
1:05:00 ~ Quick shop tour
~
If you have any suggestions, questions, or comments, please leave them below!
Thanks for stopping by, I truly appreciate your support!
#InjectionPumpProblems #AllisChalmers #SalvageWorkshop
