Is this the end of PLC programming? #ai #engineering #automation @ACCautomation
Is this the end of PLC programming? #ai #engineering #automation  @ACCautomation
Uploaded September 2026 | Updated November 2026, 3 hours ago
AI for PLC programming on an AutomationDirect Click PLC: how ChatGPT drafts ladder logic, where it fails, and how to verify every rung before download.

โšก QUICK ANSWER
AI for PLC programming works as a drafting and explaining tool, not a replacement for the programmer. Give it your exact PLC model, programming language and real I/O addresses, and it will produce a reasonable ladder logic starting point along with an address table and a plain-English explanation of each rung. What it will not do is understand your machine, your wiring or your safety requirements โ€” so the draft gets verified against the CLICK documentation and tested on real hardware with the motor disconnected before anything runs.

โš ๏ธ THE GOLDEN RULE
If you cannot explain what a rung does, do not download it to a PLC.

๐Ÿ“– FULL WALKTHROUGH + DOWNLOADS (the actual prompts, the ladder logic, the testing)
accautomation.ca/using-chatgpt-ai-to-program-a-click-plc

๐Ÿ“š WHAT YOU'LL LEARN
โœ… Where AI genuinely helps in a PLC workflow: drafting logic, building address tables, explaining instructions
โœ… Prompt with your exact PLC model, programming language and real I/O addresses instead of a generic description
โœ… Read an AI-generated seal-in latching circuit and confirm the contacts do what your machine needs
โœ… Check every instruction and address against CLICK addressing: X inputs, Y outputs, C control bits, T and TD timers, CT and CTD counters, DS data registers
โœ… Test the result on a real Click PLC by forcing bits in the Data View window with the motor physically disconnected

โ“ FREQUENTLY ASKED
Q: Is AI going to replace PLC programmers?
A: Not on current evidence. It drafts well and explains well, but it does not know your machine, your wiring or your safety requirements โ€” and it is confidently wrong often enough that every rung still needs a programmer to verify it.

Q: What is AI actually good at in PLC work?
A: Drafting a starting point, building I/O address tables, explaining what an unfamiliar instruction does, reviewing your logic and helping with documentation. It saves planning time, not verification time.

Q: What does AI get wrong most often?
A: Safety details. On a start stop circuit it will assume a normally open stop button when your wiring is normally closed, which reverses the fail-safe behavior. Always check contact types against your actual field wiring.

๐Ÿ‘‰ Full walkthrough with the actual prompts and results: accautomation.ca/using-chatgpt-ai-to-program-a-click-plc

โ–ถ FULL SERIES โ€” AI vs the PLC (9 episodes, start at Episode 1):
youtube.com/watch?v=2duueD3bZq8&list=PLZuHeVFS86eA

๐Ÿ”— MORE RESOURCES
โ–ถ Series: accautomation.ca/series/click-plc
โ–ถ DO NOT Use AI in PLCs Until You See This (all 22 rules): accautomation.ca/do-not-use-ai-in-plcs-until-you-see-this
โ–ถ PLC Beginners Guide: accautomation.ca/programming/plc-beginners-guide
โ–ถ Free eBooks: accautomation.ca (subscribe for download)

๐Ÿ›’ RECOMMENDED HARDWARE
โ–ถ Shop: automationdirect.com
โ–ถ Parts Guide: accautomation.ca/purchase-find-parts

๐Ÿ’ฌ Questions? Drop a comment below.

๐Ÿ”” New tutorials every Monday โ€” Subscribe and hit the bell!

#PLC #LadderLogic #IndustrialAutomation #PLCProgramming #ACCAutomation #ClickPLC #AutomationDirect #ChatGPT #Shorts

Regards,
Garry
ACC Automation
accautomation.ca
Is this the end of PLC programming? #ai #engineering #automationBuilding Industrial Control Systems Virtually #automation #engineering #techAdd This Counter & Timer to Your PLC Now! #tutorial #plcprogramming #automationHow to Actually Use Your PLC Toggle Switches! #plc #automation #tutorialRung 0 Breakdown: Seal-In + Sensor Bypass in One Clever Move! #PLC #LadderLogic #MotorControlTON, TOF, or RTO? Which PLC Timer Should You Use?Set & Reset Coils Simplify PLC Motor Control! ๐Ÿชœ #plc #automation #tutorialSet Your AI Expectations: No Hype Here!The #1 Mistake in PLC Simulator (and How to Avoid It) โŒ #PLC #Mistake #ShortsAI CANT Do That! PLC Programming Reality CheckWhy I Cant Do Dishes Until Im Relaxed #shorts #funnyPLC Simulation: Why your data is wrong ๐Ÿคฏ #Automation #PLC
ACC Automation: PLC & Industrial Control Learning |

Is this the end of PLC programming? #ai #engineering #automation

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER