Uploaded August 2026 | Updated November 2026, 3 hours ago
Take your conveyor program further โ add a counter to track completed cycles and a timer to pause two seconds at each end before the conveyor reverses direction.
โก QUICK ANSWER
Once your conveyor program works, two instructions will make it behave much more like a real machine: a counter and a timer. Add a counter to track how many complete cycles the box has made โ each time it travels out and back, the counter increments, giving you a running production count you can act on. Add a timer to pause for two seconds at each end before the conveyor reverses, so instead of snapping instantly into reverse the moment a sensor is hit, the belt dwells briefly โ which is how real machines behave, allowing time for a part to settle or another operation to happen. Counters and timers are the fundamental building blocks of more complex machine programs: nearly every real sequence uses them to count parts, enforce dwell times, and step through operations. Getting comfortable with them on a simple conveyor is exactly the right place to start. The full conveyor build is in the guide below.
๐ฎ TRY IT FREE โ BUILD IT IN THE ACC PLC SIMULATOR
3D scenes, no install, right in your browser: accautomation.ca/simulator
โถ WATCH THE FULL TUTORIAL
PLC Programming Tutorial: Build a Conveyor System: youtu.be/himbbHHZ6HM
๐ FULL STEP-BY-STEP + DOWNLOADS (the complete conveyor build)
accautomation.ca/plc-programming-tutorial-build-a-conveyor-system-acc-simulator
๐ WHAT YOU'LL LEARN
โ How to add a counter that tracks completed conveyor cycles
โ How to add a timer that pauses two seconds at each end before reversing
โ Why a dwell time makes a machine behave more realistically
โ Why counters and timers are the building blocks of complex machine programs
โ FREQUENTLY ASKED
Q: How do you count cycles in a PLC program?
A: Use a counter instruction โ increment it each time the machine completes a full cycle (here, each time the box travels out and back), giving you a running count you can act on. The full build is in the guide.
Q: Why add a timer before the conveyor reverses?
A: A timer creates a dwell โ a short pause at each end before reversing โ instead of snapping instantly into reverse when a sensor is hit. That's how real machines behave, allowing time for a part to settle or another operation to occur.
๐ Full conveyor build: accautomation.ca/plc-programming-tutorial-build-a-conveyor-system-acc-simulator
๐ MORE RESOURCES
๐ฎ Free ACC PLC Simulator (3D scenes, no install): accautomation.ca/simulator
โถ Step 1 โ Define the Task: youtube.com/shorts/Oy310Nk3BNk
โถ Step 5 โ Test the Program: youtube.com/shorts/slW0svgah9A
โถ PLC Beginners Guide: accautomation.ca/programming/plc-beginners-guide
โถ All Series: accautomation.ca/series
โถ Free eBooks: accautomation.ca (subscribe for download)
๐ RECOMMENDED HARDWARE
โถ Shop: automationdirect.com
โถ Parts Guide: accautomation.ca/purchase-find-parts
๐ฌ Questions? Drop a comment below.
๐ New tutorials every Monday โ Subscribe and hit the bell!
#PLC #LadderLogic #IndustrialAutomation #PLCProgramming #ACCAutomation #PLCTimer #PLCCounter #PLCSimulator #Conveyor #Shorts
Regards,
Garry
ACC Automation
accautomation.ca
Take your conveyor program further โ add a counter to track completed cycles and a timer to pause two seconds at each end before the conveyor reverses direction.
โก QUICK ANSWER
Once your conveyor program works, two instructions will make it behave much more like a real machine: a counter and a timer. Add a counter to track how many complete cycles the box has made โ each time it travels out and back, the counter increments, giving you a running production count you can act on. Add a timer to pause for two seconds at each end before the conveyor reverses, so instead of snapping instantly into reverse the moment a sensor is hit, the belt dwells briefly โ which is how real machines behave, allowing time for a part to settle or another operation to happen. Counters and timers are the fundamental building blocks of more complex machine programs: nearly every real sequence uses them to count parts, enforce dwell times, and step through operations. Getting comfortable with them on a simple conveyor is exactly the right place to start. The full conveyor build is in the guide below.
๐ฎ TRY IT FREE โ BUILD IT IN THE ACC PLC SIMULATOR
3D scenes, no install, right in your browser: accautomation.ca/simulator
โถ WATCH THE FULL TUTORIAL
PLC Programming Tutorial: Build a Conveyor System: youtu.be/himbbHHZ6HM
๐ FULL STEP-BY-STEP + DOWNLOADS (the complete conveyor build)
accautomation.ca/plc-programming-tutorial-build-a-conveyor-system-acc-simulator
๐ WHAT YOU'LL LEARN
โ How to add a counter that tracks completed conveyor cycles
โ How to add a timer that pauses two seconds at each end before reversing
โ Why a dwell time makes a machine behave more realistically
โ Why counters and timers are the building blocks of complex machine programs
โ FREQUENTLY ASKED
Q: How do you count cycles in a PLC program?
A: Use a counter instruction โ increment it each time the machine completes a full cycle (here, each time the box travels out and back), giving you a running count you can act on. The full build is in the guide.
Q: Why add a timer before the conveyor reverses?
A: A timer creates a dwell โ a short pause at each end before reversing โ instead of snapping instantly into reverse when a sensor is hit. That's how real machines behave, allowing time for a part to settle or another operation to occur.
๐ Full conveyor build: accautomation.ca/plc-programming-tutorial-build-a-conveyor-system-acc-simulator
๐ MORE RESOURCES
๐ฎ Free ACC PLC Simulator (3D scenes, no install): accautomation.ca/simulator
โถ Step 1 โ Define the Task: youtube.com/shorts/Oy310Nk3BNk
โถ Step 5 โ Test the Program: youtube.com/shorts/slW0svgah9A
โถ PLC Beginners Guide: accautomation.ca/programming/plc-beginners-guide
โถ All Series: accautomation.ca/series
โถ Free eBooks: accautomation.ca (subscribe for download)
๐ RECOMMENDED HARDWARE
โถ Shop: automationdirect.com
โถ Parts Guide: accautomation.ca/purchase-find-parts
๐ฌ Questions? Drop a comment below.
๐ New tutorials every Monday โ Subscribe and hit the bell!
#PLC #LadderLogic #IndustrialAutomation #PLCProgramming #ACCAutomation #PLCTimer #PLCCounter #PLCSimulator #Conveyor #Shorts
Regards,
Garry
ACC Automation
accautomation.ca










