Uploaded November 2023 | Updated September 2026, 2 weeks ago
In this video, we're going to be testing the Fysetc Voron 0.2 Pro R1 kit. This is a budget-friendly Voron Design V0.2 3d printer kit aimed at being a good but cheap kit.
Check out this review to see what goodies Fysetc crammed into this V0.2r1 Pro Kit & where they missed the mark.
*** Hex Mid Panel STLs: https://than.gs/m/960156
*** Side Skirt with Ports STL: https://than.gs/m/960841
*** Fysetc Instructions & Files: github.com/FYSETC/FYSETC-Voron-0.2-Pro
-----------------------------------------------------------------------------------------------
Products Featured (Affiliate Links):
*** Fysetc Voron 0.2 Pro R1 Kit: shrsl.com/4b05f
*** Machined V0 Bed Frame: https://s.click.aliexpress.com/e/_DDYulGf
*** CNC Voron X Gantry: https://s.click.aliexpress.com/e/_DC3HJxV
*** CNC POM Extruder Gear: shrsl.com/4b05j
*** Polymaker ASA Filament: tinyurl.com/PolymakerASA
-----------------------------------------------------------------------------------------------
Please consider supporting by checking out my various links:
mandicreally.com/links
-----------------------------------------------------------------------------------------------
Filmed with (Affiliate Links):
*** Main Camera: amzn.to/3c6ULgV
*** Main Lens: amzn.to/3c616cp
*** Video Recorder Used: amzn.to/46kQKN1
*** Action Camera: amzn.to/46liiBG
*** Wide Angle Lens: amzn.to/45llUSX
*** Slider: amzn.to/3nGZ1Uh
*** Studio Microphone: amzn.to/3ZJbMlY
*** Voiceover Microphone: amzn.to/3ZJccc2
*** Monopod - amzn.to/3PK4IAW
*** Tripod: amzn.to/3rMgvXh
*** Primary Lighting: amzn.to/3LN6zDO
*** Additional Lighting: amzn.to/3rIVcGk
*** RGB Lights: amzn.to/3LPGmoj
*** Drone: amzn.to/46l13Ax
-----------------------------------------------------------------------------------------------
Timestamps:
0:00 - Intro
0:39 - Unboxing
0:57 - X Gantry
1:51 - Bed Frame
2:36 - Building
3:07 - Hex Mid Panel
4:24 - Build Notes & Instructions
4:51 - BAD Prints
6:39 - Build B-Roll
7:21 - RePrints
7:54 - Bed
8:17 - Hotend
9:30 - Extruder Gears
10:13 - Toolhead PCB
10:51 - Fysetc Catalyst Board
12:04 - Bad About It
13:20 - Pigtail Cables
14:09 - Motor Noise
15:03 - Input Shaper Charts
15:25 - Is it Worth It?
16:25 - Print Quality
16:47 - Outro
The opinions expressed in this video are my own, from my personal experience. This is not a paid product advertisement. Please feel free to let me know what you think of this tool, or suggest alternatives I should check out. Disclaimer: This is not a paid advertisement. This video is solely my opinions from the use of these products and based on the specifications of them. Some of the links provided are AFFILIATE LINKS. Affiliate links give the MandicReally a small advertising fee for every purchase made via those links. This does not cost you anything more than if you purchased them normally, but helps support further video production.
#mandicreally
In this video, we're going to be testing the Fysetc Voron 0.2 Pro R1 kit. This is a budget-friendly Voron Design V0.2 3d printer kit aimed at being a good but cheap kit.
Check out this review to see what goodies Fysetc crammed into this V0.2r1 Pro Kit & where they missed the mark.
*** Hex Mid Panel STLs: https://than.gs/m/960156
*** Side Skirt with Ports STL: https://than.gs/m/960841
*** Fysetc Instructions & Files: github.com/FYSETC/FYSETC-Voron-0.2-Pro
-----------------------------------------------------------------------------------------------
Products Featured (Affiliate Links):
*** Fysetc Voron 0.2 Pro R1 Kit: shrsl.com/4b05f
*** Machined V0 Bed Frame: https://s.click.aliexpress.com/e/_DDYulGf
*** CNC Voron X Gantry: https://s.click.aliexpress.com/e/_DC3HJxV
*** CNC POM Extruder Gear: shrsl.com/4b05j
*** Polymaker ASA Filament: tinyurl.com/PolymakerASA
-----------------------------------------------------------------------------------------------
Please consider supporting by checking out my various links:
mandicreally.com/links
-----------------------------------------------------------------------------------------------
Filmed with (Affiliate Links):
*** Main Camera: amzn.to/3c6ULgV
*** Main Lens: amzn.to/3c616cp
*** Video Recorder Used: amzn.to/46kQKN1
*** Action Camera: amzn.to/46liiBG
*** Wide Angle Lens: amzn.to/45llUSX
*** Slider: amzn.to/3nGZ1Uh
*** Studio Microphone: amzn.to/3ZJbMlY
*** Voiceover Microphone: amzn.to/3ZJccc2
*** Monopod - amzn.to/3PK4IAW
*** Tripod: amzn.to/3rMgvXh
*** Primary Lighting: amzn.to/3LN6zDO
*** Additional Lighting: amzn.to/3rIVcGk
*** RGB Lights: amzn.to/3LPGmoj
*** Drone: amzn.to/46l13Ax
-----------------------------------------------------------------------------------------------
Timestamps:
0:00 - Intro
0:39 - Unboxing
0:57 - X Gantry
1:51 - Bed Frame
2:36 - Building
3:07 - Hex Mid Panel
4:24 - Build Notes & Instructions
4:51 - BAD Prints
6:39 - Build B-Roll
7:21 - RePrints
7:54 - Bed
8:17 - Hotend
9:30 - Extruder Gears
10:13 - Toolhead PCB
10:51 - Fysetc Catalyst Board
12:04 - Bad About It
13:20 - Pigtail Cables
14:09 - Motor Noise
15:03 - Input Shaper Charts
15:25 - Is it Worth It?
16:25 - Print Quality
16:47 - Outro
The opinions expressed in this video are my own, from my personal experience. This is not a paid product advertisement. Please feel free to let me know what you think of this tool, or suggest alternatives I should check out. Disclaimer: This is not a paid advertisement. This video is solely my opinions from the use of these products and based on the specifications of them. Some of the links provided are AFFILIATE LINKS. Affiliate links give the MandicReally a small advertising fee for every purchase made via those links. This does not cost you anything more than if you purchased them normally, but helps support further video production.
#mandicreally
