Uploaded May 2023 | Updated September 2026, 2 weeks ago
Recently I traveled from Philadelphia to Seattle to build a Voron 2.4 with @3DPrintingNerd! Joel posted a video about the build, but what WENT WRONG? In this video I'll show my preparation for the Voron Design V2.4 build with Joel Telling, and the PROBLEMS we ran into while constructing this fast 3D printer kit from @ldomotors!
*** Joel's 2.4 Video: youtu.be/6-QJaOXe_ws
*** LDO Distrbutors List: docs.ldomotors.com/voron/LDO_Voron_Distributors
*** BigTreeTech Screen Mount STL: https://than.gs/m/851510
*** Kris Stankievech: https://linktr.ee/ktothestank
-----------------------------------------------------------------------------------------------
Please consider supporting by checking out my various links:
mandicreally.com/links
-----------------------------------------------------------------------------------------------
Products featured:
*** LDO Voron 2.4 Rev-C Kit: shrsl.com/427oh
*** Polymaker Filament: tinyurl.com/PolymakerASA
*** BigTreeTech 4.3" TFT: shrsl.com/422xl
-----------------------------------------------------------------------------------------------
Filmed with:
*** Main Camera: amzn.to/3c6ULgV
*** Main Lens: amzn.to/3c616cp
*** Overhead Camera: amzn.to/2U4b1nZ
*** Video Recorder Used: amzn.to/3ymN90U
*** Action Camera: amzn.to/2ATHS73
*** Second Camera: amzn.to/371EhBM
*** B-Roll Lens: amzn.to/2xmg85L
*** Wide Angle Lens: amzn.to/2YiZTmH
*** Slider: amzn.to/3nGZ1Uh
*** Lav Mic: amzn.to/2DFwgR5
*** Shotgun Mic: amzn.to/2IjTJiB
*** Mini Tripod: amzn.to/2Eok8Fw
*** Monopod - amzn.to/2C1YEMU
*** Tripod: amzn.to/2yASruf
*** Gimbal: amzn.to/2FNwesV
*** Primary Lighting: amzn.to/2jHROnW
*** Additional Lighting: amzn.to/2DImspx
*** RGB Lights: amzn.to/2UUGAOk
*** Drone: amzn.to/2yDkwkI
-----------------------------------------------------------------------------------------------
TIMESTAMPS:
0:00 - Intro
0:45 - Preparations
1:01 - Pi Setup w/ Klipper
2:20 - Printed Parts Prep
4:16 - Klicky Probe Assembly
5:30 - Surprising Joel!
8:05 - The PROBLEMS BEGIN
8:55 - No BOOT
10:06 - Z-Home Fail
10:50 - Klicky Probe...
12:20 - My Problem w/ the LDO Kit
13:28 - FINAL Problem
13:50 - Outro
The opinions expressed in this video are my own, from my personal experience. This is not a paid product advertisement. Please feel free to let me know what you think of this tool, or suggest alternatives I should check out. Disclaimer: This is not a paid advertisement. This video is solely my opinions from the use of these products and based on the specifications of them. Some of the links provided are AMAZON AFFILIATE LINKS or others. Affiliate links give the MandicReally a small advertising fee for every purchase made via those links. This does not cost you anything more than if you purchased them normally.
#3dprinter #voron #3dprintingnerd
Recently I traveled from Philadelphia to Seattle to build a Voron 2.4 with @3DPrintingNerd! Joel posted a video about the build, but what WENT WRONG? In this video I'll show my preparation for the Voron Design V2.4 build with Joel Telling, and the PROBLEMS we ran into while constructing this fast 3D printer kit from @ldomotors!
*** Joel's 2.4 Video: youtu.be/6-QJaOXe_ws
*** LDO Distrbutors List: docs.ldomotors.com/voron/LDO_Voron_Distributors
*** BigTreeTech Screen Mount STL: https://than.gs/m/851510
*** Kris Stankievech: https://linktr.ee/ktothestank
-----------------------------------------------------------------------------------------------
Please consider supporting by checking out my various links:
mandicreally.com/links
-----------------------------------------------------------------------------------------------
Products featured:
*** LDO Voron 2.4 Rev-C Kit: shrsl.com/427oh
*** Polymaker Filament: tinyurl.com/PolymakerASA
*** BigTreeTech 4.3" TFT: shrsl.com/422xl
-----------------------------------------------------------------------------------------------
Filmed with:
*** Main Camera: amzn.to/3c6ULgV
*** Main Lens: amzn.to/3c616cp
*** Overhead Camera: amzn.to/2U4b1nZ
*** Video Recorder Used: amzn.to/3ymN90U
*** Action Camera: amzn.to/2ATHS73
*** Second Camera: amzn.to/371EhBM
*** B-Roll Lens: amzn.to/2xmg85L
*** Wide Angle Lens: amzn.to/2YiZTmH
*** Slider: amzn.to/3nGZ1Uh
*** Lav Mic: amzn.to/2DFwgR5
*** Shotgun Mic: amzn.to/2IjTJiB
*** Mini Tripod: amzn.to/2Eok8Fw
*** Monopod - amzn.to/2C1YEMU
*** Tripod: amzn.to/2yASruf
*** Gimbal: amzn.to/2FNwesV
*** Primary Lighting: amzn.to/2jHROnW
*** Additional Lighting: amzn.to/2DImspx
*** RGB Lights: amzn.to/2UUGAOk
*** Drone: amzn.to/2yDkwkI
-----------------------------------------------------------------------------------------------
TIMESTAMPS:
0:00 - Intro
0:45 - Preparations
1:01 - Pi Setup w/ Klipper
2:20 - Printed Parts Prep
4:16 - Klicky Probe Assembly
5:30 - Surprising Joel!
8:05 - The PROBLEMS BEGIN
8:55 - No BOOT
10:06 - Z-Home Fail
10:50 - Klicky Probe...
12:20 - My Problem w/ the LDO Kit
13:28 - FINAL Problem
13:50 - Outro
The opinions expressed in this video are my own, from my personal experience. This is not a paid product advertisement. Please feel free to let me know what you think of this tool, or suggest alternatives I should check out. Disclaimer: This is not a paid advertisement. This video is solely my opinions from the use of these products and based on the specifications of them. Some of the links provided are AMAZON AFFILIATE LINKS or others. Affiliate links give the MandicReally a small advertising fee for every purchase made via those links. This does not cost you anything more than if you purchased them normally.
#3dprinter #voron #3dprintingnerd
