Uploaded November 2026 | Updated November 2026, 4 days ago
Free PLC simulator features: ladder logic and structured text editors, an I/O panel with toggle switches and analog sliders, and step mode with visual power flow.
โก QUICK ANSWER
The ACC PLC Simulator runs entirely in a browser and gives you a ladder logic editor and an IEC 61131-3 structured text editor, an I/O panel with toggle switches, output indicators and analog sliders, run, stop and step mode with visual power flow, and six interactive 3D industrial scenes. The power flow display is the part worth dwelling on. You see which rungs are energised as the program runs, and in step mode you execute a single scan at a time and watch exactly what changed between one scan and the next. That is how the scan cycle stops being an abstraction and becomes something you can see. All of it is free, in a browser, with nothing to install. The full write-up is on the blog.
๐ FULL WRITTEN ARTICLE
accautomation.ca/i-replaced-a-5000-plc-trainer-with-free-plc-training-simulator
๐ฅ๏ธ OPEN THE FREE SIMULATOR
accautomation.ca/simulator
โถ WATCH THE FULL VIDEO
youtu.be/aRtPHhYAd7Y
๐ WHAT YOU'LL LEARN
โ Use the I/O panel - toggle switches for inputs, output indicators, and analog sliders that give you the same 0 to 4095 range a real potentiometer or 4-20mA transmitter produces
โ Follow the visual power flow and see exactly which rungs are energised while the program runs
โ Use step mode to execute a single scan, then see precisely what changed - the fastest way to understand the PLC scan cycle
โ Switch between a ladder logic editor and an IEC 61131-3 structured text editor on the same program
โ Connect any of it to six interactive 3D industrial scenes, free, in a browser, with no install
โ FREQUENTLY ASKED
Q: What is step mode and why does it matter?
A: It executes one scan of your program and stops. Toggle an input, run a single scan, and you can see exactly which rungs changed state. It turns the scan cycle from something you read about into something you watch happen.
Q: Do the analog sliders behave like real analog inputs?
A: Yes - they produce the same raw count range a real potentiometer or 4-20mA transmitter gives a PLC, so the scaling maths you write against them is the maths you would write against hardware.
๐ The full comparison against a hardware trainer: accautomation.ca/i-replaced-a-5000-plc-trainer-with-free-plc-training-simulator
๐ MORE RESOURCES
โถ Try the free simulator: accautomation.ca/simulator
โถ Learning structured text in the simulator: youtu.be/B0UDgJnE3DQ
โถ PLC Beginners Guide: accautomation.ca/programming/plc-beginners-guide
โถ Free eBooks: accautomation.ca (subscribe for download)
๐ RECOMMENDED HARDWARE
โถ Shop: automationdirect.com
โถ Parts Guide: accautomation.ca/purchase-find-parts
๐ฌ Questions? Drop a comment below.
๐ New tutorials every Monday โ Subscribe and hit the bell!
#PLC #LadderLogic #IndustrialAutomation #PLCProgramming #ACCAutomation #PLCSimulator #StructuredText #LearnPLC #PLCTraining #Shorts
Regards,
Garry
ACC Automation
accautomation.ca
Free PLC simulator features: ladder logic and structured text editors, an I/O panel with toggle switches and analog sliders, and step mode with visual power flow.
โก QUICK ANSWER
The ACC PLC Simulator runs entirely in a browser and gives you a ladder logic editor and an IEC 61131-3 structured text editor, an I/O panel with toggle switches, output indicators and analog sliders, run, stop and step mode with visual power flow, and six interactive 3D industrial scenes. The power flow display is the part worth dwelling on. You see which rungs are energised as the program runs, and in step mode you execute a single scan at a time and watch exactly what changed between one scan and the next. That is how the scan cycle stops being an abstraction and becomes something you can see. All of it is free, in a browser, with nothing to install. The full write-up is on the blog.
๐ FULL WRITTEN ARTICLE
accautomation.ca/i-replaced-a-5000-plc-trainer-with-free-plc-training-simulator
๐ฅ๏ธ OPEN THE FREE SIMULATOR
accautomation.ca/simulator
โถ WATCH THE FULL VIDEO
youtu.be/aRtPHhYAd7Y
๐ WHAT YOU'LL LEARN
โ Use the I/O panel - toggle switches for inputs, output indicators, and analog sliders that give you the same 0 to 4095 range a real potentiometer or 4-20mA transmitter produces
โ Follow the visual power flow and see exactly which rungs are energised while the program runs
โ Use step mode to execute a single scan, then see precisely what changed - the fastest way to understand the PLC scan cycle
โ Switch between a ladder logic editor and an IEC 61131-3 structured text editor on the same program
โ Connect any of it to six interactive 3D industrial scenes, free, in a browser, with no install
โ FREQUENTLY ASKED
Q: What is step mode and why does it matter?
A: It executes one scan of your program and stops. Toggle an input, run a single scan, and you can see exactly which rungs changed state. It turns the scan cycle from something you read about into something you watch happen.
Q: Do the analog sliders behave like real analog inputs?
A: Yes - they produce the same raw count range a real potentiometer or 4-20mA transmitter gives a PLC, so the scaling maths you write against them is the maths you would write against hardware.
๐ The full comparison against a hardware trainer: accautomation.ca/i-replaced-a-5000-plc-trainer-with-free-plc-training-simulator
๐ MORE RESOURCES
โถ Try the free simulator: accautomation.ca/simulator
โถ Learning structured text in the simulator: youtu.be/B0UDgJnE3DQ
โถ PLC Beginners Guide: accautomation.ca/programming/plc-beginners-guide
โถ Free eBooks: accautomation.ca (subscribe for download)
๐ RECOMMENDED HARDWARE
โถ Shop: automationdirect.com
โถ Parts Guide: accautomation.ca/purchase-find-parts
๐ฌ Questions? Drop a comment below.
๐ New tutorials every Monday โ Subscribe and hit the bell!
#PLC #LadderLogic #IndustrialAutomation #PLCProgramming #ACCAutomation #PLCSimulator #StructuredText #LearnPLC #PLCTraining #Shorts
Regards,
Garry
ACC Automation
accautomation.ca










