Setting up the AI Conveyor Program Challenge! @ACCautomation
Setting up the AI Conveyor Program Challenge!  @ACCautomation
Uploaded November 2026 | Updated November 2026, 3 hours ago
Map a PLC conveyor program with six I/O points in the ACC PLC Simulator, then hand that exact specification to an AI and see what it writes.

โšก QUICK ANSWER
PLC conveyor control in the ACC PLC Simulator runs on six I/O points: X1 start normally open, X2 stop normally closed and TRUE at rest, X3 and X4 the left and right proximity sensors, Y1 motor run, and Y2 direction where OFF is forward and ON is reverse. That I/O map is the whole specification an AI needs, which is exactly what was typed in before asking it to write the Structured Text program. The full prompt, the code it produced and the corrections it needed are in the written test.

๐Ÿ“– FULL STEP-BY-STEP + DOWNLOADS (project file, wiring diagrams, screenshots)
accautomation.ca/can-ai-program-a-plc-i-tested-it-live-in-the-acc-plc-simulator

๐Ÿ“š WHAT YOU'LL LEARN
โœ… Assign all six conveyor I/O points before writing a single line of PLC code
โœ… Wire a stop button as normally closed so it reads TRUE at rest and fails safe
โœ… Use two proximity sensors at opposite ends to trigger a direction reversal
โœ… Separate a motor run output from a direction output instead of combining them
โœ… Write an I/O specification complete enough for an AI to code against

โ“ FREQUENTLY ASKED
Q: Why is the stop button normally closed instead of normally open?
A: A normally closed stop reads TRUE at rest, so a broken wire or a lost connection stops the conveyor instead of leaving it running.

Q: What does the direction output actually do?
A: Y2 selects travel direction only. OFF is forward and ON is reverse, while Y1 independently decides whether the motor runs at all.

Q: Can the ACC PLC Simulator really run this without hardware?
A: Yes. The conveyor scene provides all six I/O points in the browser, so the program runs against a 3D conveyor with no PLC on the bench.
๐Ÿ‘‰ Full step-by-step, code and wiring diagrams: accautomation.ca/can-ai-program-a-plc-i-tested-it-live-in-the-acc-plc-simulator

๐Ÿ”— MORE RESOURCES
โ–ถ Series: accautomation.ca/series
โ–ถ Free PLC Simulator: accautomation.ca/simulator
โ–ถ PLC Beginners Guide: accautomation.ca/programming/plc-beginners-guide
โ–ถ Free eBooks: accautomation.ca (subscribe for download)

๐Ÿ›’ RECOMMENDED HARDWARE
โ–ถ Shop: automationdirect.com
โ–ถ Parts Guide: accautomation.ca/purchase-find-parts

๐Ÿ’ฌ Questions? Drop a comment below.

๐Ÿ”” New tutorials every Monday โ€” Subscribe and hit the bell!

#PLC #LadderLogic #StructuredText #IndustrialAutomation #PLCProgramming #ACCAutomation #PLCTutorial #LearnPLC #Shorts

Regards,
Garry
ACC Automation
accautomation.ca
Setting up the AI Conveyor Program Challenge!PLC Start/Stop: The Seal-In Latch Explained!I/O Allocation Problems: The Real Reason Your System Isnt WorkingWhat is a normally closed contact?Stop Button Test Catches the Hidden Problem! ๐Ÿ›‘ #plcprogramming #automationWhy You Need to Use a Drum Sequencer for Traffic Lights #PLC #automation #codingPLC Programming Tutorial: Build a Conveyor System (ACC Simulator)!Your Gamepad Buttons Are Momentary PLC Pushbuttons!Smart Gamepad Control No More Stuck Inputs!Try Gamepad PLC Simulation Yourself โ€” Instant Access!Can AI Actually Write PLC Code?  I Put It to the Test...Why STOP Always Beats START in PLC Circuits! ๐Ÿ›‘
ACC Automation: PLC & Industrial Control Learning |

Setting up the AI Conveyor Program Challenge!

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER