NeedItMakeIt | Is an UNfilled 3D Print Stronger than an INfilled 3D Print? @NeedItMakeIt | Uploaded June 2024 | Updated October 2024, 13 hours ago.
Tell me if you think this option should be added to the slicer!
Help support this channel! patreon.com/Needitmakeit
This is an idea I had a long time ago and really it's not my idea, it's taking what we already know from the structural steel industry and finding a way to apply it to 3D printing. With printing we have the advantage of being able to make any shape we'd like, with steel, it's possible, but hard to do on a big scale. I beams are another good example of how to make the ideal beams with minimum deflection and max load capacity. These are great if you understand the direction of loading well, if not, a square tube is another great option and it's most similar to what we've done here in this set of tests.
I added in the Black Basic PETG because I was curious, but it was not charted with the rest since it was not part of the main experiment. It is a good clue to the performance differences between the different materials and how layer adhesion and the flexibility of the different materials affects their performance.
Print Details - Continuous:
Bambu PETG-CF (Brick Red)
0.4mm Nozzle, 0.2mm LH, 6 Walls, 12 T, 12 B, 30% Cross Hatch Infill (Orca)
Print Details - Experimental:
0.4mm Nozzle, 0.2mm LH, 8 Walls, 15 T, 15 B, 0% Infill
One way to support this channel is through my affiliate links (where I receive a small commission). It helps me to continue to provide high-quality content videos. Thank you for your support!
#1 Core XY - Best bang-for-buck
QIDI Q1 Pro - qidi3d.com/products/q1-pro?sca_ref=5735403.eknTRISP1e
This printer isn't as full featured as the X1C, but it is very capable and very precise. It also has a heated chamber and can reach higher hot end temps.
#2 Core XY - Most features with great results but Pricey $$
Bambu X1C - shrsl.com/4j1gz
Bambu Filament Shown in Videos
shrsl.com/4ks0j
Panda Jet For Bambu P1 and X1 Series (Tested and proven to work well)
PANDA JET: shrsl.com/4jhht
DIGITAL SCALE AMAZON LINKS
amzn.to/4eCX0nT - (US)
amzn.to/4eGySkd - (Canada)
NEW MIC (I bought this)
amzn.to/3vcMKAr - Rode Wireless ME mic (Saved me about 4+ hours/vid)
amzn.to/3NBFvZe - Mag clip (Super handy, but a little pricy)
#3dprinting
#x1c
#strong
Tell me if you think this option should be added to the slicer!
Help support this channel! patreon.com/Needitmakeit
This is an idea I had a long time ago and really it's not my idea, it's taking what we already know from the structural steel industry and finding a way to apply it to 3D printing. With printing we have the advantage of being able to make any shape we'd like, with steel, it's possible, but hard to do on a big scale. I beams are another good example of how to make the ideal beams with minimum deflection and max load capacity. These are great if you understand the direction of loading well, if not, a square tube is another great option and it's most similar to what we've done here in this set of tests.
I added in the Black Basic PETG because I was curious, but it was not charted with the rest since it was not part of the main experiment. It is a good clue to the performance differences between the different materials and how layer adhesion and the flexibility of the different materials affects their performance.
Print Details - Continuous:
Bambu PETG-CF (Brick Red)
0.4mm Nozzle, 0.2mm LH, 6 Walls, 12 T, 12 B, 30% Cross Hatch Infill (Orca)
Print Details - Experimental:
0.4mm Nozzle, 0.2mm LH, 8 Walls, 15 T, 15 B, 0% Infill
One way to support this channel is through my affiliate links (where I receive a small commission). It helps me to continue to provide high-quality content videos. Thank you for your support!
#1 Core XY - Best bang-for-buck
QIDI Q1 Pro - qidi3d.com/products/q1-pro?sca_ref=5735403.eknTRISP1e
This printer isn't as full featured as the X1C, but it is very capable and very precise. It also has a heated chamber and can reach higher hot end temps.
#2 Core XY - Most features with great results but Pricey $$
Bambu X1C - shrsl.com/4j1gz
Bambu Filament Shown in Videos
shrsl.com/4ks0j
Panda Jet For Bambu P1 and X1 Series (Tested and proven to work well)
PANDA JET: shrsl.com/4jhht
DIGITAL SCALE AMAZON LINKS
amzn.to/4eCX0nT - (US)
amzn.to/4eGySkd - (Canada)
NEW MIC (I bought this)
amzn.to/3vcMKAr - Rode Wireless ME mic (Saved me about 4+ hours/vid)
amzn.to/3NBFvZe - Mag clip (Super handy, but a little pricy)
#3dprinting
#x1c
#strong
