Uploaded May 2026 | Updated September 2026, 2 weeks ago
They say size isn't everything, but today at Tripods Garage, we're testing that theory with the LaserPecker LX2. It's bigger, it's beefier, and yes, I’m going to spend the next 20 minutes talking about my Pecker.
To Purchase - tidd.ly/3ROpgg7
Use code TRIPODSLX2 for 5% off!
LaserPecker has finally moved into the large-format arena, and I wanted to see if this new, larger model can handle the heavy lifting (and the curved surfaces) better than the smaller ones.
What’s inside this video:
Handling the Unit: From unboxing to setup, I’ll show you the best way to grip and position your LaserPecker for maximum results.
The "Pecker Probe": Watch as I use the specialized probe to find the perfect depth—precision is key when you're working with something this powerful.
Camera Action: I’m showing off the live camera preview, which helps you see exactly where your Pecker is going to hit before you start.
Hardwood & Hardware: We’re testing it on slate, walnut, and some of my wife’s cutlery (don't tell her).
Swapping Parts: Sometimes you need a different head for the job—I'll show you how to swap modules and use the "Blue Pill" Riser Base to get that extra lift.
If you’ve been wondering if you should upgrade to a bigger Pecker, this review is for you.
Big thanks to PCBWay for sponsoring the channel! If you need PCBs, CNC, or 3D printing, they’ve got you covered.
Chapters:
00:00 A Bigger Pecker?
01:00 Getting It Out of the Box
02:18 Plugging It In (Label Your Bricks!)
03:12 Fan Noise & Hot Air
04:22 Build Quality: Is It Stiff Enough?
05:27 Sponsor: PCBWay
05:55 Calibrating the Eyes
06:54 Giving It a Lift (Risers)
07:34 The Probing Process
08:56 Previewing the Target
10:00 Hardwood Results
11:26 Can It Cut?
12:43 Swapping Heads: The 2W IR
13:50 Working on Curves (Spoons & Forks)
16:12 The "Blue Pill" Riser Base
18:55 Final Thoughts: Is This the Pecker for You?
If you enjoyed this look at my shop tools, make sure to like, subscribe, and hit the bell so you never miss another Tripods Garage update!
#LaserPeckerLX2 #TripodsGarage #LaserEngraving #ToolReview #Maker #WorkshopHumor #BigLaser #pcbway
Disclaimer - This is an instructional video only - I assume no responsibility if you do not become a pro after watching this video. This video is for learning purposes only, you are following the steps in this video at your own risk!
facebook.com/tripodsgarage
twitter.com/tripodsgarage
instagram.com/tripodsgarage
Thanks for watching - Please Like and Subscribe!
They say size isn't everything, but today at Tripods Garage, we're testing that theory with the LaserPecker LX2. It's bigger, it's beefier, and yes, I’m going to spend the next 20 minutes talking about my Pecker.
To Purchase - tidd.ly/3ROpgg7
Use code TRIPODSLX2 for 5% off!
LaserPecker has finally moved into the large-format arena, and I wanted to see if this new, larger model can handle the heavy lifting (and the curved surfaces) better than the smaller ones.
What’s inside this video:
Handling the Unit: From unboxing to setup, I’ll show you the best way to grip and position your LaserPecker for maximum results.
The "Pecker Probe": Watch as I use the specialized probe to find the perfect depth—precision is key when you're working with something this powerful.
Camera Action: I’m showing off the live camera preview, which helps you see exactly where your Pecker is going to hit before you start.
Hardwood & Hardware: We’re testing it on slate, walnut, and some of my wife’s cutlery (don't tell her).
Swapping Parts: Sometimes you need a different head for the job—I'll show you how to swap modules and use the "Blue Pill" Riser Base to get that extra lift.
If you’ve been wondering if you should upgrade to a bigger Pecker, this review is for you.
Big thanks to PCBWay for sponsoring the channel! If you need PCBs, CNC, or 3D printing, they’ve got you covered.
Chapters:
00:00 A Bigger Pecker?
01:00 Getting It Out of the Box
02:18 Plugging It In (Label Your Bricks!)
03:12 Fan Noise & Hot Air
04:22 Build Quality: Is It Stiff Enough?
05:27 Sponsor: PCBWay
05:55 Calibrating the Eyes
06:54 Giving It a Lift (Risers)
07:34 The Probing Process
08:56 Previewing the Target
10:00 Hardwood Results
11:26 Can It Cut?
12:43 Swapping Heads: The 2W IR
13:50 Working on Curves (Spoons & Forks)
16:12 The "Blue Pill" Riser Base
18:55 Final Thoughts: Is This the Pecker for You?
If you enjoyed this look at my shop tools, make sure to like, subscribe, and hit the bell so you never miss another Tripods Garage update!
#LaserPeckerLX2 #TripodsGarage #LaserEngraving #ToolReview #Maker #WorkshopHumor #BigLaser #pcbway
Disclaimer - This is an instructional video only - I assume no responsibility if you do not become a pro after watching this video. This video is for learning purposes only, you are following the steps in this video at your own risk!
facebook.com/tripodsgarage
twitter.com/tripodsgarage
instagram.com/tripodsgarage
Thanks for watching - Please Like and Subscribe!
