Uploaded July 2020 | Updated September 2026, 2 weeks ago
#Ender #Hotend #PETG-CF
I have been wanting to print PETG Carbon Fiber for a long time. In this video we will replace the stock hotend on the Ender 5 Plus with a MicroSwiss all metal hotend, that allow you to print as higher temperatures. We will also be adding a harden steel nozzle for abrasive filaments, like Carbon Fiber.
I posted the wrong filament - Below is the filament I used
PRILINE Carbon Fiber PETG 1KG 1.75 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1kg Spool, 1.75 mm,Black
amazon.com/dp/B07ZN44383/ref=cm_sw_r_cp_api_i_lTFaFbTWWFJ9R
Skip to where you need
0:23 intro
3:05 MicroSwiss description
5:35 Installation
16:18 Brand of PETG-CF
16:40 Test Prints
25:45 Cura Profile
34:39 Cura Experimental Tree Supports
37:54 Closing Thoughts
David Wilson's YouTube Channel
youtube.com/user/woodwaker1
MicroSwiss hotend
store.micro-swiss.com/collections/all-metal-hotend-kits/products/all-metal-hotend-kit-for-cr-10
Harbor Freight workbench -https://www.harborfreight.com/60-in-4...
Disclaimer - This is an instructional video only - I assume no responsibility if you do not become a pro after watching this video. This video is for learning purposes only, you are following the steps in this video at your own risk!
facebook.com/tripodsgarage
twitter.com/tripodsgarage
instagram.com/tripodsgarage
Thanks for watching - Please Like and Subscribe!
BTT SKR V1.4 & SKR V1.4, 32-Bit Control Board, BIGTREETECH TFT35 V3.0 Display- Two Working Modes, Silent board, TMC2208, BIGTREETECH TMC2100 TMC2208 V3.0 TMC2130 V3.0 Stepper Motor Driver, 3D Printer, 3D Printing, Bigtreetech 32bit 1.4 Skr Turbo, CR-10, CR-10s, Ender 3, Ender 3Pro, Ender 5 Pro, Ender 5, creality silent board, silent board, MicroSwiss, all metal hotend, carbon fiber, PETG, awesome prints, great print quality
#Ender #Hotend #PETG-CF
I have been wanting to print PETG Carbon Fiber for a long time. In this video we will replace the stock hotend on the Ender 5 Plus with a MicroSwiss all metal hotend, that allow you to print as higher temperatures. We will also be adding a harden steel nozzle for abrasive filaments, like Carbon Fiber.
I posted the wrong filament - Below is the filament I used
PRILINE Carbon Fiber PETG 1KG 1.75 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1kg Spool, 1.75 mm,Black
amazon.com/dp/B07ZN44383/ref=cm_sw_r_cp_api_i_lTFaFbTWWFJ9R
Skip to where you need
0:23 intro
3:05 MicroSwiss description
5:35 Installation
16:18 Brand of PETG-CF
16:40 Test Prints
25:45 Cura Profile
34:39 Cura Experimental Tree Supports
37:54 Closing Thoughts
David Wilson's YouTube Channel
youtube.com/user/woodwaker1
MicroSwiss hotend
store.micro-swiss.com/collections/all-metal-hotend-kits/products/all-metal-hotend-kit-for-cr-10
Harbor Freight workbench -https://www.harborfreight.com/60-in-4...
Disclaimer - This is an instructional video only - I assume no responsibility if you do not become a pro after watching this video. This video is for learning purposes only, you are following the steps in this video at your own risk!
facebook.com/tripodsgarage
twitter.com/tripodsgarage
instagram.com/tripodsgarage
Thanks for watching - Please Like and Subscribe!
BTT SKR V1.4 & SKR V1.4, 32-Bit Control Board, BIGTREETECH TFT35 V3.0 Display- Two Working Modes, Silent board, TMC2208, BIGTREETECH TMC2100 TMC2208 V3.0 TMC2130 V3.0 Stepper Motor Driver, 3D Printer, 3D Printing, Bigtreetech 32bit 1.4 Skr Turbo, CR-10, CR-10s, Ender 3, Ender 3Pro, Ender 5 Pro, Ender 5, creality silent board, silent board, MicroSwiss, all metal hotend, carbon fiber, PETG, awesome prints, great print quality
