Uploaded August 2016 | Updated November 2026, 4 days ago
Fixing IPhone error "message not sent"
One of the reasons for this error to occur is that the message center number of your carrier isn't set correctly!
to set that follow this
Change the SMS Centre Number From the home screen, tap Phone.
1. If the dial pad is not visible, tap Keypad.
2. Enter *#5005*7672#, then tap Call.
3. The current SMSC setting is shown on the screen. Tap Dismiss.
4. If the SMSC number needs changing, enter **5005*7672*SMSCNUMBER#, (where SMSCNUMBER is replaced with the correct SMSC number in full international format).
5. Tap Call. The message "Setting succeeded, Service Centre Address, No Address" will appear on screen.
6. Tap Dismiss.
7. Enter *#5005*7672# then tap Call.
The new SMSC number will be shown on the screen.
So follow the video to set it right to solve the problem
Fixing IPhone error "message not sent"
One of the reasons for this error to occur is that the message center number of your carrier isn't set correctly!
to set that follow this
Change the SMS Centre Number From the home screen, tap Phone.
1. If the dial pad is not visible, tap Keypad.
2. Enter *#5005*7672#, then tap Call.
3. The current SMSC setting is shown on the screen. Tap Dismiss.
4. If the SMSC number needs changing, enter **5005*7672*SMSCNUMBER#, (where SMSCNUMBER is replaced with the correct SMSC number in full international format).
5. Tap Call. The message "Setting succeeded, Service Centre Address, No Address" will appear on screen.
6. Tap Dismiss.
7. Enter *#5005*7672# then tap Call.
The new SMSC number will be shown on the screen.
So follow the video to set it right to solve the problem






![fix for Pycharm Linux No module named distutils cmd Unable to locate package python3.9-distutils
fix for Pycharm Linux No module named distutils cmd Unable to locate package python3.9-distutils
Error while installing python3.9-distutils:
E: Unable to locate package python3.9-distutils
E: Couldnt find any package by glob python3.9-distutils
E: Couldnt find any package by regex python3.9-distutils
Error on pycharm community edition when installing python modules:
error ModuleNotFoundError: No module named distutils.cmd
Solution :
sudo add-apt-repository ppa:deadsnakes/ppa
sudo apt install python3.9-distutils
solution link:
https://askubuntu.com/questions/1239829/modulenotfounderror-no-module-named-distutils-util
Song: BVRNOUT - Take It Easy (feat. Mia Vaile) [NCS Release]
Music provided by NoCopyrightSounds
Free Download/Stream: http://ncs.io/TakeItEasy fix for Pycharm Linux No module named distutils cmd Unable to locate package python3.9-distutils](https://i.ytimg.com/vi/QoWx31IztpU/mqdefault.jpg)



![Fix for loading of unsigned module rejected when installing drivers for usb wifi dongle ubuntu
These drivers work for USB WiFi Adapters that are based on the RTL8811CU, RTL8821CU, RTL8821CUH and RTL8731AU Chipsets - v5.12.0.4
The link for github page is:
https://github.com/morrownr/8821cU-20210916
thanks to developer morrownr for updating the drivers regularly
The error is as follows
+0.000005] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
+0.000002] us 3-3: Product: 802.11ac NIC
+0.000001] usb 3-3: Manufacturer: Realtek
+0.000001] usb 3-3: SerialNumber: 123456
+0.007299] Loading of unsigned module is rejected
fix is straight forward,
i disabled the secure boot option in Bios settings,
do access bios settings, keep tapping on delete while initial boot, then disable the secure boot, after that save the bios settings and reboot, this should make the drivers loaded properly, and wifi should start working
thanks for watching,
do like and subscribe Fix for loading of unsigned module rejected when installing drivers for usb wifi dongle ubuntu](https://i.ytimg.com/vi/ScfYxXrJZlM/mqdefault.jpg)