Uploaded February 2016 | Updated November 2026, 4 days ago
Transfer files from android wear to pc or android device through wifi
you need to enable sync option in your android wear app on your android phone
you would need a computer,android wear and an android phone
1.enable developer option in your android wear by going to settings-about- keep tapping build number 8 times and u will enable developer options
2.go to developer options in settings and enable adb,and connect ur watch to the system
3.download adb driver installer and install the driver for your android wear
adb driver installer- adbdriver.com/upload/adbdriver.zip
4.extract the adb fastboot folder , and copy es explorer apk to the same folder for ease of access
adb fastboot zip-docs.google.com/file/d/0B2ghGhwyFr5hOWxvZWdBR3VkRlE
es explorer apk-http://openbox.mobilem.360.cn/index/d/sid/3571
5.after that go to adb fastboot folder and place your mouse pointer in that folder and right click on your mouse holding the shift key on your keyboard ,the u get an option for open command window here, click on that
6.in command prompt use these commands
adb devices
this command gives all the devices that are connected in adb mode,
you need to authorize the computer on your android watch
next give the following command
adb install com.estrongs.android.pop_506.apk
this would install the apk to your android wear .make sure you copy the com.estrongs.android.pop_506.apk file which you downloaded earlier to adb fastboot folder.
7.after you install you can open the app on your watch
8.your watch must be connected automatically to the wifi network as your phone shares the cedentials of your network once you enable sync option on your android wear app.
9.no you can open es explorer on your phone and send all the files you want to by dragging them to share icon and select android wear in the next menu.make sure you are on the same wifi network inorder for this to work
10.you can even enable network share on your android wear to going to remote manager and turn that on.
11.you can go to your computer an then use any ftp client to connect it to your watch.
thanks for watching ,you r good to go
Transfer files from android wear to pc or android device through wifi
you need to enable sync option in your android wear app on your android phone
you would need a computer,android wear and an android phone
1.enable developer option in your android wear by going to settings-about- keep tapping build number 8 times and u will enable developer options
2.go to developer options in settings and enable adb,and connect ur watch to the system
3.download adb driver installer and install the driver for your android wear
adb driver installer- adbdriver.com/upload/adbdriver.zip
4.extract the adb fastboot folder , and copy es explorer apk to the same folder for ease of access
adb fastboot zip-docs.google.com/file/d/0B2ghGhwyFr5hOWxvZWdBR3VkRlE
es explorer apk-http://openbox.mobilem.360.cn/index/d/sid/3571
5.after that go to adb fastboot folder and place your mouse pointer in that folder and right click on your mouse holding the shift key on your keyboard ,the u get an option for open command window here, click on that
6.in command prompt use these commands
adb devices
this command gives all the devices that are connected in adb mode,
you need to authorize the computer on your android watch
next give the following command
adb install com.estrongs.android.pop_506.apk
this would install the apk to your android wear .make sure you copy the com.estrongs.android.pop_506.apk file which you downloaded earlier to adb fastboot folder.
7.after you install you can open the app on your watch
8.your watch must be connected automatically to the wifi network as your phone shares the cedentials of your network once you enable sync option on your android wear app.
9.no you can open es explorer on your phone and send all the files you want to by dragging them to share icon and select android wear in the next menu.make sure you are on the same wifi network inorder for this to work
10.you can even enable network share on your android wear to going to remote manager and turn that on.
11.you can go to your computer an then use any ftp client to connect it to your watch.
thanks for watching ,you r good to go
![Fix for loading of unsigned module rejected when installing drivers for usb wifi dongle ubuntu
These drivers work for USB WiFi Adapters that are based on the RTL8811CU, RTL8821CU, RTL8821CUH and RTL8731AU Chipsets - v5.12.0.4
The link for github page is:
https://github.com/morrownr/8821cU-20210916
thanks to developer morrownr for updating the drivers regularly
The error is as follows
+0.000005] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
+0.000002] us 3-3: Product: 802.11ac NIC
+0.000001] usb 3-3: Manufacturer: Realtek
+0.000001] usb 3-3: SerialNumber: 123456
+0.007299] Loading of unsigned module is rejected
fix is straight forward,
i disabled the secure boot option in Bios settings,
do access bios settings, keep tapping on delete while initial boot, then disable the secure boot, after that save the bios settings and reboot, this should make the drivers loaded properly, and wifi should start working
thanks for watching,
do like and subscribe Fix for loading of unsigned module rejected when installing drivers for usb wifi dongle ubuntu](https://i.ytimg.com/vi/ScfYxXrJZlM/mqdefault.jpg)

![Solution for cuda compiler 12 3 Depends cuda nvcc 12 3 |apt fix-broken install
Solution :
sudo apt fix-broken install -o Dpkg::Options:: force-overwrite
Error faced:
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
Correcting dependencies... Done
The following packages were automatically installed and are no longer required:
libnvidia-compute-535 libwmf0.2-7 linux-headers-6.1.11-76060111
linux-headers-6.1.11-76060111-generic linux-image-6.1.11-76060111-generic
linux-modules-6.1.11-76060111-generic nvidia-driver-535
Use sudo apt autoremove to remove them.
The following additional packages will be installed:
cuda-nvcc-12-3 cuda-nvrtc-12-3 cuda-nvrtc-dev-12-3 libcurand-12-3
libcurand-dev-12-3
The following packages will be upgraded:
cuda-nvcc-12-3 cuda-nvrtc-12-3 cuda-nvrtc-dev-12-3 libcurand-12-3
libcurand-dev-12-3
5 upgraded, 0 newly installed, 0 to remove and 14 not upgraded.
9 not fully installed or removed.
Need to get 0 B/144 MB of archives.
After this operation, 4,096 B of additional disk space will be used.
Do you want to continue? [Y/n] y
(Reading database ... 326513 files and directories currently installed.)
Preparing to unpack .../cuda-nvrtc-12-3_12.3.107-1_amd64.deb ...
Unpacking cuda-nvrtc-12-3 (12.3.107-1) over (12.3.103-1) ...
dpkg: error processing archive /var/cache/apt/archives/cuda-nvrtc-12-3_12.3.107-
1_amd64.deb ( unpack):
trying to overwrite /usr/local/cuda-12.3/lib64, which is also in package cuda
-cccl-12-3 12.3.101-1
Preparing to unpack .../libcurand-12-3_10.3.4.107-1_amd64.deb ...
Unpacking libcurand-12-3 (10.3.4.107-1) over (10.3.4.101-1) ...
dpkg: error processing archive /var/cache/apt/archives/libcurand-12-3_10.3.4.107
-1_amd64.deb ( unpack):
trying to overwrite /usr/local/cuda-12.3/lib64, which is also in package cuda
-cccl-12-3 12.3.101-1
Preparing to unpack .../cuda-nvcc-12-3_12.3.107-1_amd64.deb ...
Unpacking cuda-nvcc-12-3 (12.3.107-1) over (12.3.103-1) ...
dpkg: error processing archive /var/cache/apt/archives/cuda-nvcc-12-3_12.3.107-1
_amd64.deb ( unpack):
trying to overwrite /usr/local/cuda-12.3/include, which is also in package cu
da-cccl-12-3 12.3.101-1
Preparing to unpack .../cuda-nvrtc-dev-12-3_12.3.107-1_amd64.deb ...
Unpacking cuda-nvrtc-dev-12-3 (12.3.107-1) over (12.3.103-1) ...
dpkg: error processing archive /var/cache/apt/archives/cuda-nvrtc-dev-12-3_12.3.
107-1_amd64.deb ( unpack):
trying to overwrite /usr/local/cuda-12.3/include, which is also in package cu
da-cccl-12-3 12.3.101-1
No apport report written because MaxReports is reached already
Preparing to unpac
k .../libcurand-dev-12-3_10.3.4.107-1_amd64.deb ...
Unpacking libcurand-dev-12-3 (10.3.4.107-1) over (10.3.4.101-1) ...
dpkg: error processing archive /var/cache/apt/archives/libcurand-dev-12-3_10.3.4
.107-1_amd64.deb ( unpack):
trying to overwrite /usr/local/cuda-12.3/include, which is also in package cu
da-cccl-12-3 12.3.101-1
No apport report written because MaxReports is reached already
Errors were encoun
tered while processing:
/var/cache/apt/archives/cuda-nvrtc-12-3_12.3.107-1_amd64.deb
/var/cache/apt/archives/libcurand-12-3_10.3.4.107-1_amd64.deb
/var/cache/apt/archives/cuda-nvcc-12-3_12.3.107-1_amd64.deb
/var/cache/apt/archives/cuda-nvrtc-dev-12-3_12.3.107-1_amd64.deb
/var/cache/apt/archives/libcurand-dev-12-3_10.3.4.107-1_amd64.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)
You might want to run apt fix-broken install to correct these.
The following packages have unmet dependencies:
cuda-compiler-12-3 : Depends: cuda-nvcc-12-3 (= 12.3.107) but 12.3.103-1 is installed
cuda-libraries-12-3 : Depends: cuda-nvrtc-12-3 (= 12.3.107) but 12.3.103-1 is installed
Depends: libcurand-12-3 (= 10.3.4.107) but 10.3.4.101-1 is installed
cuda-libraries-dev-12-3 : Depends: cuda-nvrtc-dev-12-3 (= 12.3.107) but 12.3.103-1 is installed
Depends: libcurand-dev-12-3 (= 10.3.4.107) but 10.3.4.101-1 is installed
cuda-nvcc-12-3 : Depends: cuda-nvvm-12-3 (= 12.3.103-1) but 12.3.107-1 is installed
Depends: cuda-crt-12-3 (= 12.3.103-1) but 12.3.107-1 is installed
E: Unmet dependencies. Try apt fix-broken install with no packages (or specify a solution). Solution for cuda compiler 12 3 Depends cuda nvcc 12 3 |apt fix-broken install](https://i.ytimg.com/vi/TOmf4z3oDYU/mqdefault.jpg)







