Uploaded November 2024 | Updated September 2026, 2 weeks ago

---

Step-by-step teardown of the iPhone 16 Pro Max covering disassembly, part replacement, and reassembly tips for a successful DIY repair.
Buy tools and parts on AMAZON:
Screwdriver Set: hfixt.com/mpro
Pro Toolkit: hfixt.com/tool
Magnetic Mat: hfixt.com/mat
Tweezers: hfixt.com/tzrs

Global AliExpress:
Screwdriver Set: hfixt.com/alis
Opening Tool Kit: hfixt.com/alit
Magnetic Mat: hfixt.com/amat
Tweezers set: hfixt.com/altz
Adhesive Tape: hfixt.com/ip16a

📌*Useful links*
More DIY repair guides: how-fixit.com

📱Follow us for more tech tips and guides!
Instagram: instagram.com/howfixit
Facebook: facebook.com/HowFixit
X: https://x.com/HowFixit

*Description*
In this comprehensive iPhone 16 Pro Max teardown guide, we’ll walk you through the full disassembly and reassembly process to replace or repair any internal components. This video covers how to remove and replace the mid-frame housing, back glass, display, battery, logic board, cameras, Face ID, speaker, power or volume button, charging port and much more. Whether you’re dealing with a damaged screen or a faulty charging port, this guide has all the steps you need to bring your iPhone back to life.
After the repair, we’ll walk you through calibrating replacement parts with Repair Assistant for full compatibility with your iPhone’s features.

Key Takeaways:
✅Full teardown of iPhone 16 Pro Max, covering every component.
✅Step-by-step guide for part replacements, including display, battery, and logic board.
✅Reassembly tips for maintaining waterproofing and function.
✅Calibration guide for new parts using Repair Assistant.
✅Essential safety and organization advice for a smooth repair process.

🎬Time Codes:
0:00 Introduction to iPhone 16 Pro Max Repair Guide
0:27 Tools Needed for Repair
0:49 Preparing for repairs
1:15 Start of disassembly
1:25 Back Glass Removal
3:40 Disconnecting Battery and Back Glass
3:52 Taptic Engine Removal
4:55 Speaker Removal
5:19 Battery Removal with Adhesive Strips
6:45 Lidar Sensor, Camera & Face ID Removal
08:04 Charging Port Removal
09:13 Bottom Microphone Removal
10:38 Front Microphone Removal
14:00 Display Removal
16:38 Logic Board Removal
17:40 Power & Control Button Removal
19:52 Volume Buttons Removal
20:16 Mid-Frame Housing Replacement
20:44 Reassembly
34:57 Calibration with Repair Assistant
37:50 Restoring Water Resistance

🌟FAQ:
Question: How do I remove the back glass of the iPhone 16 Pro Max?
Answer: Use a heat source (hair dryer or heat gun) to soften adhesive around the back glass. Use a suction cup and pry tools to carefully separate the glass.

Question: What tools are necessary for an iPhone 16 Pro Max teardown?
Answer: Essential tools include pentalobe and tri-wing screwdrivers, tweezers, suction cup, plastic pry tools, waterproof adhesive tape, and battery adhesive strips.

Question: Can I replace the battery myself on an iPhone 16 Pro Max?
Answer: Yes, this guide covers safe battery removal using adhesive strips and installation of a new battery.

Question: Is re-calibration necessary after iPhone repair?
Answer: Yes, calibrate replaced parts using Repair Assistant to ensure full functionality, especially if replacing the battery, display, or Face ID.

Question: Do I need new adhesive for reassembly to keep it waterproof?
Answer: Yes, applying waterproof adhesive tape during reassembly is essential to restore water resistance.

AFFILIATE PROGRAM
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.

#iphone16promax #howfixit #teardown #iphone16repair #diyrepair