Uploaded January 2025 | Updated September 2026, 2 weeks ago

---

Fix your iPhone 16 Pro Max Face ID and front facing camera by replacing the module and restoring full functionality with this easy, step-by-step guide.
Buy tools and parts on AMAZON:
Screwdriver Set: hfixt.com/mpro
Pro Toolkit: hfixt.com/tool
Magnetic Mat: hfixt.com/mat
Tweezers: hfixt.com/tzrs

Global AliExpress:
Screwdriver Set: hfixt.com/alis
Opening Tool Kit: hfixt.com/alit
Magnetic Mat: hfixt.com/amat
Tweezers set: hfixt.com/altz
Adhesive Tape: hfixt.com/ip16a
Face ID: https://s.click.aliexpress.com/e/_oBRqfrb

📌*Useful links*
More DIY repair guides: how-fixit.com

📱Follow us for more tech tips and guides!
Instagram: instagram.com/howfixit
Facebook: facebook.com/HowFixit
X: https://x.com/HowFixit

*Description*
Learn how to fix a non-working or disabled Face ID and front camera on your iPhone 16 Pro Max in this comprehensive repair tutorial. In this video, we walk you through each step of replacing the Face ID module, covering recommended tools, back glass removal, and reassembly. By following our guidance on water resistance restoration and proper calibration with Repair Assistant, you can fully recover Face ID functionality without visiting an expensive repair shop.
We start with essential tools: Pentalobe (0.8 mm) and Tri-Wing (0.8 mm) screwdrivers, tweezers, plastic pry tools, and a suction cup to safely open your device. A magnetic mat helps keep those tiny screws organized, making your repair more efficient. Once the back glass is removed, the Face ID module—including the front camera, dot projector, and infrared camera—can be replaced effortlessly. After installing your new module, follow our instructions to calibrate using Repair Assistant to ensure Face ID is recognized properly.
Finally, discover how to restore water resistance by applying new adhesive tape around the frame. We’ll show you how to remove old seals, clean surfaces with isopropyl alcohol, and precisely align the new tape for a proper seal. Whether you’re facing a disabled Face ID or a failing front camera, this in-depth DIY guide gives you the confidence to fix your device at home. Links to all necessary tools and parts are provided below. Give us a thumbs up if you find this tutorial helpful, and subscribe to HowFixit for more do-it-yourself tech solutions!

KEY TAKEAWAYS
✅Properly organize your workspace with a magnetic mat and precise tools.
✅Gently remove the back glass using controlled heat.
✅Replace the entire Face ID module if the front camera or Face ID is disabled.
✅Calibrate the new module with Repair Assistant to restore functionality.
✅Reapply waterproof adhesive tape to maintain water and dust resistance.

🎬TIME CODE
00:00 – Introduction to Face ID Repair & Replacement Guide
00:18 – Tools Required
00:59 – Preparing iPhone & Removing Screws
01:15 – Heating & Separating Back Glass
03:07 – Disconnecting Battery & Back Glass Cable
03:42 – Removing Old Face ID Module
04:12 – Installing New Face ID Module
04:45 – Repair Assistant Calibration
06:26 – Testing Face ID & Camera
06:53 – Water Resistance Restoration
10:58 – Conclusion & Final Tips

🌟FAQ (Frequently Asked Questions)

Can I use a hair dryer instead of a heat gun?
Yes. A hair dryer can warm the back glass sufficiently to soften the adhesive, but be cautious not to overheat.

Do I need special software to calibrate Face ID?
You’ll use Apple’s built-in Repair Assistant accessible through the Parts & Service History in Settings.

What if the Repair Assistant fails to complete?
Double-check Wi-Fi connection, battery percentage, and proper module installation before trying again.

Is it safe to reuse the original adhesive?
No. Once removed, original adhesive loses its sealing properties. Replace with new waterproof tape for best results.

Will a third-party Face ID module always work?
Some third-party parts may fail calibration. In that case, Face ID remains disabled and an ‘Issue’ status will appear in Parts & Service History.

AFFILIATE PROGRAM
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.

#iphone16promax #howfixit #iphonerepair #diy #diyrepair