Ionic Conduction via (CH3)2CO @diveflyfish
Ionic Conduction via (CH3)2CO  @diveflyfish
Uploaded February 2012 | Updated November 2026, 3 hours ago
This experiment was accomplished for two reasons. First to see if chemically one could pull ALL water from a crystal lattice using desiccants as well as drying agents such as acetone. The video also is to demonstrate again the ionic mobilization and current initiation is NOT necessarily a resultant of pure galvanic action on the numerous crystal cell variants. This test shows TWO identical Graphite electrodes. Addition of Acetone ( (CH3)2CO ) allows ionic conduction. Again, I am NOT advocating making acetone wet cells, rather to demonstrate that it is an action that occurs even with IDENTICAL electrodes. By definition, this would be non galvanic.
My efforts are on creating cells that do not need to be hydrated with water if at all possible. The question is thus, do we need water for these cells? Perhaps not.

All thoughts welcome
Very Best Regards,
Diveflyfish
Ionic Conduction via (CH3)2COMotors Rotors and PlasmaInteresting ROTARY Plasma DischargeGalvanic BELOW ZERO & Update Shorted OREOPressure Tests Positive NegativeMHD AMP DRAW TEST ONE & PLASMA COUPLINGSUPER PENNY VARIANT ON C/MG CellsBearing Test & Passive Coil Output.movPLASMA INITIATION OF ROTOR Spinning WITHOUT PRIMARY MOVERTesla Hairpin Circuit.movHV CAP QUANDRY SOLVED (PIEZO COUPLING)NOT CAP RELATEDCrystal Stress and Mag Field
diveflyfish |

Ionic Conduction via (CH3)2CO

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER