Uploaded July 2023 | Updated November 2026, 3 days ago
$299.99 - elegoo.com/products/elegoo-neptune-4-pro-fdm-3d-printer
Main Features:
【Pre-installed Klipper Firmware】The Neptune 4 Pro 3D printer is designed to be fast and efficient. It features a quiet Klipper motherboard and ARM 64-bit 1.5G main frequency quad-core processor for sufficient processing power, allowing it to print at a amazing speed of up to 500mm/s (recommended 250mm/s), and supports advanced functions like input shaping and pressure advance to achieve accurate and smooth models.
【Dual-Gear Direct Drive Extruder】The dual-gear direct drive extruder with a 5.2:1 reduction ratio for smooth and consistent extrusion, combined with the copper-titanium bi-metal throat pipe and unique air duct design, improve heat dissipation and reduce nozzle clogging.
【300°C High-temp Nozzle】With a high-temperature nozzle reaching 300°C, the printer can handle a wide range of filaments, including PLA, PETG, ABS, TPU, and high-temperature filaments like nylon. The extended hot end design ensures consistent heating and faster melting and extrusion, resulting in faster printing speed.
【Intelligent Segmented Heatbed】With 100W+150W power output, the slicing software automatically recognizes the size of the model during slicing and activates the peripheral heating zone if the model size exceeds the center heating zone (120mmx120mm). The two partitions can also be turned on and off manually for more precise temperature control. Additionally, the surface of the PEI magnetic platform is marked for guidance.
【Auto Bed Leveling + Auxiliary Leveling】With 121 (11x11) points auto bed leveling, you can achieve consistent and reliable prints every time without the need for manual bed leveling. Additionally, the auxiliary leveling by hand-twist knobs allows for further fine-tuning of the print bed's level for improved print quality.
【Efficient Heat Dissipation】ELEGOO Neptune 4 Pro also features 2 thickened double-sided 4015 ball bearing cooling fans and 4x4020 ball bearing blower fans behind the print head for omnidirectional rapid cooling the newly printed layers to prevent warping and improve overall print quality even at a fast printing speed.
*************************************************************************
*Please help support this channel at NO COST TO YOU. If you shop on* *Amazon, please use this link: amzn.to/3706t6c *
*I will get a small commission and it costs you nothing. *
*************************************************************************
HEY YOU ABOUT TO POST SOMETHING STUPID:
Yes, I know my hands are large/fat. It's because of a heart condition I suffer from called Congestive Heart Failure. Here's a link to some information about CHF: https://cle.clinic/2TdS2Ux
One of the symptoms is that it causes fluid retention, mostly in the hands, feet/ankles, and face..
-------------------------------------------------------------------------------------------------------------------
Support learnelectronics:
Amazon Store:
If you are shopping for electronic components, test gear or consumables please consider visiting my Amazon shop @ amazon.com/shop/learnelectronics
Patreon:
Please check out patreon.com/learnelectronics and pledge a dollar if you can. It will go a long way to keeping the channel alive. It costs a bit of money to buy all the items and produce these videos. Your help is appreciated.
Paypal:
Or....if you'd like to send a one-time donation you can use this link: paypal.me/learnelectronics
---------------------------------------------------------------------------------------------------------------------
Gear I use:
Multimeter: OWON B33+ amzn.to/3UkTJOo
Oscilloscope: KIPRIM DS1202 amzn.to/3gfJGMN
Signal generator: Junctek JDS8080 shorturl.at/ehTZ1
Component Tester: T7 Multifunction amzn.to/3AYY03v
Soldering Station: Sealody ???????
$299.99 - elegoo.com/products/elegoo-neptune-4-pro-fdm-3d-printer
Main Features:
【Pre-installed Klipper Firmware】The Neptune 4 Pro 3D printer is designed to be fast and efficient. It features a quiet Klipper motherboard and ARM 64-bit 1.5G main frequency quad-core processor for sufficient processing power, allowing it to print at a amazing speed of up to 500mm/s (recommended 250mm/s), and supports advanced functions like input shaping and pressure advance to achieve accurate and smooth models.
【Dual-Gear Direct Drive Extruder】The dual-gear direct drive extruder with a 5.2:1 reduction ratio for smooth and consistent extrusion, combined with the copper-titanium bi-metal throat pipe and unique air duct design, improve heat dissipation and reduce nozzle clogging.
【300°C High-temp Nozzle】With a high-temperature nozzle reaching 300°C, the printer can handle a wide range of filaments, including PLA, PETG, ABS, TPU, and high-temperature filaments like nylon. The extended hot end design ensures consistent heating and faster melting and extrusion, resulting in faster printing speed.
【Intelligent Segmented Heatbed】With 100W+150W power output, the slicing software automatically recognizes the size of the model during slicing and activates the peripheral heating zone if the model size exceeds the center heating zone (120mmx120mm). The two partitions can also be turned on and off manually for more precise temperature control. Additionally, the surface of the PEI magnetic platform is marked for guidance.
【Auto Bed Leveling + Auxiliary Leveling】With 121 (11x11) points auto bed leveling, you can achieve consistent and reliable prints every time without the need for manual bed leveling. Additionally, the auxiliary leveling by hand-twist knobs allows for further fine-tuning of the print bed's level for improved print quality.
【Efficient Heat Dissipation】ELEGOO Neptune 4 Pro also features 2 thickened double-sided 4015 ball bearing cooling fans and 4x4020 ball bearing blower fans behind the print head for omnidirectional rapid cooling the newly printed layers to prevent warping and improve overall print quality even at a fast printing speed.
*************************************************************************
*Please help support this channel at NO COST TO YOU. If you shop on* *Amazon, please use this link: amzn.to/3706t6c *
*I will get a small commission and it costs you nothing. *
*************************************************************************
HEY YOU ABOUT TO POST SOMETHING STUPID:
Yes, I know my hands are large/fat. It's because of a heart condition I suffer from called Congestive Heart Failure. Here's a link to some information about CHF: https://cle.clinic/2TdS2Ux
One of the symptoms is that it causes fluid retention, mostly in the hands, feet/ankles, and face..
-------------------------------------------------------------------------------------------------------------------
Support learnelectronics:
Amazon Store:
If you are shopping for electronic components, test gear or consumables please consider visiting my Amazon shop @ amazon.com/shop/learnelectronics
Patreon:
Please check out patreon.com/learnelectronics and pledge a dollar if you can. It will go a long way to keeping the channel alive. It costs a bit of money to buy all the items and produce these videos. Your help is appreciated.
Paypal:
Or....if you'd like to send a one-time donation you can use this link: paypal.me/learnelectronics
---------------------------------------------------------------------------------------------------------------------
Gear I use:
Multimeter: OWON B33+ amzn.to/3UkTJOo
Oscilloscope: KIPRIM DS1202 amzn.to/3gfJGMN
Signal generator: Junctek JDS8080 shorturl.at/ehTZ1
Component Tester: T7 Multifunction amzn.to/3AYY03v
Soldering Station: Sealody ???????


![555 Timer Tips & Tricks - Sponsored by Solderstick Wire Connectors
Uncover the world of electronics with our latest video on 555 Timer Tips & Tricks - Sponsored by Solderstick Wire Connectors. Are you ready to get hands-on with your hobby and learn some useful tips and tricks about the 555 timer? Then, this video is just for you!
🔗 Get solderstick at 20% OFF with discount code LE20 at https://www.solderstick.com/sale
[Understanding the 555 Timer] The 555 timer is a versatile and widely used integrated circuit, designed for timing and pulse generation. The video covers the basics of the 555 timer, its modes of operation, and how to use it in different electronic projects.
[Practical Tips and Tricks] We delve into practical tips and tricks to help you get the most out of your 555 timer. We discuss how to use it in astable, monostable, and bistable modes, how to calculate timing intervals, and how to troubleshoot common issues.
[Hands-on Tutorial] The video includes a hands-on tutorial where we build a simple 555 timer circuit using Solderstick Wire Connectors. We demonstrate how easy it is to assemble and test the circuit, making it a great project for hobbyists and electronics enthusiasts.
[Safe and Reliable Connections] Sponsored by Solderstick Wire Connectors, we highlight the importance of making safe and reliable connections in your electronics projects. Solderstick Wire Connectors provide a secure and durable solution, ensuring your circuits function as intended.
[What you get] 1*Instructional Video, 1*Practical Tips and Tricks, 1*Hands-on Tutorial, 1*Product Review, and a whole lot of fun!
*************************************************************************
*Please help support this channel at NO COST TO YOU. If you shop on* *Amazon, please use this link: https://amzn.to/3706t6c *
*I will get a small commission and it costs you nothing. *
*************************************************************************
HEY YOU ABOUT TO POST SOMETHING STUPID:
Yes, I know my hands are large/fat. Its because of a heart condition I suffer from called Congestive Heart Failure. Heres a link to some information about CHF: https://cle.clinic/2TdS2Ux
One of the symptoms is that it causes fluid retention, mostly in the hands, feet/ankles, and face..
Support learnelectronics:
Amazon Store:
If you are shopping for electronic components, test gear or consumables please consider visiting my Amazon shop @ amazon.com/shop/learnelectronics
Patreon:
Please check out www.patreon.com/learnelectronics and pledge a dollar if you can. It will go a long way to keeping the channel alive. It costs a bit of money to buy all the items and produce these videos. Your help is appreciated.
Paypal:
Or....if youd like to send a one-time donation you can use this link: paypal.me/learnelectronics
Gear I use:
Multimeter: OWON B33+ https://amzn.to/3UkTJOo
Oscilloscope: KIPRIM DS1202 https://amzn.to/3gfJGMN
Signal generator: Junctek JDS8080 shorturl.at/ehTZ1
Component Tester: T7 Multifunction https://amzn.to/3AYY03v
Soldering Station: Sealody ??????? 555 Timer Tips & Tricks - Sponsored by Solderstick Wire Connectors](https://i.ytimg.com/vi/tP13NBH_ds4/mqdefault.jpg)







