Uploaded August 2023 | Updated November 2026, 3 hours ago
Klipper is the next evolution of 3D printer operating systems. Klipper is the firmware that resides on the microcontroller in your printer. It takes all the calculations that the printer has to do to move the print head and the bed to their proper positions while maintaining the heat of both the extruder and the bed and controlling how much hot melty plastic squirts out of the tip; and it lets a separate processor handle all of it. All Klipper on the printer does is accept commands from the other processor. This being many times more powerful can process the data at speeds a little STM MCU could never handle. Here is more information about Klipper and it's parters Fluidd and Moonraker.
Klipper: klipper3d.org
Fluidd: https://docs.fluidd.xyz/
Moonraker: moonraker.readthedocs.io/en/latest/installation
*************************************************************************
*Please help support this channel at NO COST TO YOU. If you shop on* *Amazon, please use this link: amzn.to/3706t6c *
*I will get a small commission and it costs you nothing. *
*************************************************************************
HEY YOU ABOUT TO POST SOMETHING STUPID:
Yes, I know my hands are large/fat. It's because of a heart condition I suffer from called Congestive Heart Failure. Here's a link to some information about CHF: https://cle.clinic/2TdS2Ux
One of the symptoms is that it causes fluid retention, mostly in the hands, feet/ankles, and face..
-------------------------------------------------------------------------------------------------------------------
Support learnelectronics:
Amazon Store:
If you are shopping for electronic components, test gear or consumables please consider visiting my Amazon shop @ amazon.com/shop/learnelectronics
Patreon:
Please check out patreon.com/learnelectronics and pledge a dollar if you can. It will go a long way to keeping the channel alive. It costs a bit of money to buy all the items and produce these videos. Your help is appreciated.
Paypal:
Or....if you'd like to send a one-time donation you can use this link: paypal.me/learnelectronics
---------------------------------------------------------------------------------------------------------------------
Gear I use:
Multimeter: OWON B33+ amzn.to/3UkTJOo
Oscilloscope: KIPRIM DS1202 amzn.to/3gfJGMN
Signal generator: Junctek JDS8080 shorturl.at/ehTZ1
Component Tester: T7 Multifunction amzn.to/3AYY03v
Soldering Station: Sealody ???????
Klipper is the next evolution of 3D printer operating systems. Klipper is the firmware that resides on the microcontroller in your printer. It takes all the calculations that the printer has to do to move the print head and the bed to their proper positions while maintaining the heat of both the extruder and the bed and controlling how much hot melty plastic squirts out of the tip; and it lets a separate processor handle all of it. All Klipper on the printer does is accept commands from the other processor. This being many times more powerful can process the data at speeds a little STM MCU could never handle. Here is more information about Klipper and it's parters Fluidd and Moonraker.
Klipper: klipper3d.org
Fluidd: https://docs.fluidd.xyz/
Moonraker: moonraker.readthedocs.io/en/latest/installation
*************************************************************************
*Please help support this channel at NO COST TO YOU. If you shop on* *Amazon, please use this link: amzn.to/3706t6c *
*I will get a small commission and it costs you nothing. *
*************************************************************************
HEY YOU ABOUT TO POST SOMETHING STUPID:
Yes, I know my hands are large/fat. It's because of a heart condition I suffer from called Congestive Heart Failure. Here's a link to some information about CHF: https://cle.clinic/2TdS2Ux
One of the symptoms is that it causes fluid retention, mostly in the hands, feet/ankles, and face..
-------------------------------------------------------------------------------------------------------------------
Support learnelectronics:
Amazon Store:
If you are shopping for electronic components, test gear or consumables please consider visiting my Amazon shop @ amazon.com/shop/learnelectronics
Patreon:
Please check out patreon.com/learnelectronics and pledge a dollar if you can. It will go a long way to keeping the channel alive. It costs a bit of money to buy all the items and produce these videos. Your help is appreciated.
Paypal:
Or....if you'd like to send a one-time donation you can use this link: paypal.me/learnelectronics
---------------------------------------------------------------------------------------------------------------------
Gear I use:
Multimeter: OWON B33+ amzn.to/3UkTJOo
Oscilloscope: KIPRIM DS1202 amzn.to/3gfJGMN
Signal generator: Junctek JDS8080 shorturl.at/ehTZ1
Component Tester: T7 Multifunction amzn.to/3AYY03v
Soldering Station: Sealody ???????
![555 Timer Tips & Tricks - Sponsored by Solderstick Wire Connectors
Uncover the world of electronics with our latest video on 555 Timer Tips & Tricks - Sponsored by Solderstick Wire Connectors. Are you ready to get hands-on with your hobby and learn some useful tips and tricks about the 555 timer? Then, this video is just for you!
🔗 Get solderstick at 20% OFF with discount code LE20 at https://www.solderstick.com/sale
[Understanding the 555 Timer] The 555 timer is a versatile and widely used integrated circuit, designed for timing and pulse generation. The video covers the basics of the 555 timer, its modes of operation, and how to use it in different electronic projects.
[Practical Tips and Tricks] We delve into practical tips and tricks to help you get the most out of your 555 timer. We discuss how to use it in astable, monostable, and bistable modes, how to calculate timing intervals, and how to troubleshoot common issues.
[Hands-on Tutorial] The video includes a hands-on tutorial where we build a simple 555 timer circuit using Solderstick Wire Connectors. We demonstrate how easy it is to assemble and test the circuit, making it a great project for hobbyists and electronics enthusiasts.
[Safe and Reliable Connections] Sponsored by Solderstick Wire Connectors, we highlight the importance of making safe and reliable connections in your electronics projects. Solderstick Wire Connectors provide a secure and durable solution, ensuring your circuits function as intended.
[What you get] 1*Instructional Video, 1*Practical Tips and Tricks, 1*Hands-on Tutorial, 1*Product Review, and a whole lot of fun!
*************************************************************************
*Please help support this channel at NO COST TO YOU. If you shop on* *Amazon, please use this link: https://amzn.to/3706t6c *
*I will get a small commission and it costs you nothing. *
*************************************************************************
HEY YOU ABOUT TO POST SOMETHING STUPID:
Yes, I know my hands are large/fat. Its because of a heart condition I suffer from called Congestive Heart Failure. Heres a link to some information about CHF: https://cle.clinic/2TdS2Ux
One of the symptoms is that it causes fluid retention, mostly in the hands, feet/ankles, and face..
Support learnelectronics:
Amazon Store:
If you are shopping for electronic components, test gear or consumables please consider visiting my Amazon shop @ amazon.com/shop/learnelectronics
Patreon:
Please check out www.patreon.com/learnelectronics and pledge a dollar if you can. It will go a long way to keeping the channel alive. It costs a bit of money to buy all the items and produce these videos. Your help is appreciated.
Paypal:
Or....if youd like to send a one-time donation you can use this link: paypal.me/learnelectronics
Gear I use:
Multimeter: OWON B33+ https://amzn.to/3UkTJOo
Oscilloscope: KIPRIM DS1202 https://amzn.to/3gfJGMN
Signal generator: Junctek JDS8080 shorturl.at/ehTZ1
Component Tester: T7 Multifunction https://amzn.to/3AYY03v
Soldering Station: Sealody ??????? 555 Timer Tips & Tricks - Sponsored by Solderstick Wire Connectors](https://i.ytimg.com/vi/tP13NBH_ds4/mqdefault.jpg)









