Uploaded May 2024 | Updated November 2026, 3 days ago
This is the OctaPass
It's eight 4-pole (24dB/oct) high fidelity fixed-frequency high-pass (low-cut) filter.
The frequencies can be selected at build time by selecting the desired resistors.
Each channel can be switched to bypass or filter. Switching is done via Vactrol for no pops or clicks when switched.
The outputs are normalled to the next input, so you can obtain steeper cutoff values, turning the module into one 192dB/octave filter. That's a cliff right there.
6HP
Approximately 30mA on each rail, HEAVILY dependent on op amp choice and LED color
This is the OctaPass
It's eight 4-pole (24dB/oct) high fidelity fixed-frequency high-pass (low-cut) filter.
The frequencies can be selected at build time by selecting the desired resistors.
Each channel can be switched to bypass or filter. Switching is done via Vactrol for no pops or clicks when switched.
The outputs are normalled to the next input, so you can obtain steeper cutoff values, turning the module into one 192dB/octave filter. That's a cliff right there.
6HP
Approximately 30mA on each rail, HEAVILY dependent on op amp choice and LED color










