Fixing PCB mistakes! JLCPCB-assembled kick drum PCB @ozerik
Fixing PCB mistakes! JLCPCB-assembled kick drum PCB  @ozerik
Uploaded November 2021 | Updated November 2026, 6 hours ago
Here's my Doubleplusbass project. There were three mistakes with the PCB, two of them totally my fault, and one to a strange design software glitch.

1) The inverting input and the output of the op amp in the CV processing section were swapped.
2) The gain capacitor in the main oscillator was connected to the wrong spot. I make this error ALL THE TIME when I'm building this type of VCO, it's obnoxious. I bet I won't do that anymore.
3) here's the software-glitch error: one of the nets got linked to another net, so I dutifully traced it out and bam, it doesn't match the schematic. So I had to take one resistor off and connect it directly between the transistors.

I'm outrageously happy with JLCPCB's fabrication and their design software. This is my first PCB, and seeing my design in such an organized, reliable form is delightful. Building one of these up, *including* repairing the errors, takes less than an hour, while putting one of these together with through-hole components would take at least a couple hours, possibly more. And the resulting circuit would be much larger physically, and there would be more opportunities for errors to pop up.
Fixing PCB mistakes! JLCPCB-assembled kick drum PCBBare metal look stretched Honda CubAtari Punk Console x1.5 demoJuanitos C70 Wabi-SabiRubber DuckieThe Die That Refused To BrainThe Punchers Special EditionYou can build this white noise generator!!!Hardware Challenge   UnderwaterBlack Corporation Ise-Nin DIY kit umboxingWalkie Talkie synchs up to my diy synthesizer!Carlton Banks - Whats so Funny + Pirupa - Get Lost music video
juanito moore |

Fixing PCB mistakes! JLCPCB-assembled kick drum PCB

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER