Uploaded December 2022 | Updated November 2026, 7 hours ago
Here's what comes in the Ise-Nin DIY kit from Black Corporation. You can order a DIY kit here:
black-corporation.com/product/ise-nin
It's a Roland Jupiter-8 clone, with enhancements to the user interface, but with essentially the same hardware in the original. The kit is really good quality, and the build documentation is thorough, well organized, and is being actively updated by the good folks over at Black Corporation.
It is an involved build, with a lot of SMD work, but is mostly through-hole. I will be able to finish this kit with just a soldering iron.
None of the parts are all that rare or unobtainable, but some are specialty parts, like the NTC resistors, the Alpha (CEM) chips. Assembling the BOM for this was much easier than getting the parts for the RE-909 I built last year.
Here's what comes in the Ise-Nin DIY kit from Black Corporation. You can order a DIY kit here:
black-corporation.com/product/ise-nin
It's a Roland Jupiter-8 clone, with enhancements to the user interface, but with essentially the same hardware in the original. The kit is really good quality, and the build documentation is thorough, well organized, and is being actively updated by the good folks over at Black Corporation.
It is an involved build, with a lot of SMD work, but is mostly through-hole. I will be able to finish this kit with just a soldering iron.
None of the parts are all that rare or unobtainable, but some are specialty parts, like the NTC resistors, the Alpha (CEM) chips. Assembling the BOM for this was much easier than getting the parts for the RE-909 I built last year.










