Uploaded December 2017 | Updated September 2026, 2 hours ago
insight-security.com/security-screws-anti-tamper
- An Insight Security “Quick Guide” to; Clutch Head Anti Tamper security screws.
Clutch Head Security Screws are the original, low cost, one-way security screws that once installed are almost impossible to remove without drilling them out.
The screws are available in a range of materials including BZP and A2 Stainless Steel and are installed with a standard flat blade screwdriver.
While no specialist tool is needed to install them, should you need to remove them, a special Clutch Head Removal Tool is available to help remove clutch-head screws that are manufactured from Stainless Steel.
The head of the screw features a clockwise drive face, which allows the screw to be installed with a conventional flat bladed screwdriver,
...but if any attempt is made to remove the screw again, the anti-clockwise movement of the driver blade on the screw head, causes it to simply slip off the chamfered rear face, ...making it extremely difficult to remove the screw once installed.
These low cost security screws are the original type of One-way Security Screw, which has been proven over many years.
These screws are available from stock - in a choice of; Woodscrews, Self Tapping Screws and Metric Machine Screws.
The Twin Thread Woodscrews are manufactured from Bright Zinc Plated hardened steel, the Self Tapping screws and the Metric Machine Screws are manufactured from Stainless Steel.
…for more information visit the website; insight-security.com
…or call one of the insight specialists, t: +44 (0)1273 475500, where you’ll speak to a real person with a wealth of expertise and knowledge to draw on.
insight-security.com/security-screws-anti-tamper
- An Insight Security “Quick Guide” to; Clutch Head Anti Tamper security screws.
Clutch Head Security Screws are the original, low cost, one-way security screws that once installed are almost impossible to remove without drilling them out.
The screws are available in a range of materials including BZP and A2 Stainless Steel and are installed with a standard flat blade screwdriver.
While no specialist tool is needed to install them, should you need to remove them, a special Clutch Head Removal Tool is available to help remove clutch-head screws that are manufactured from Stainless Steel.
The head of the screw features a clockwise drive face, which allows the screw to be installed with a conventional flat bladed screwdriver,
...but if any attempt is made to remove the screw again, the anti-clockwise movement of the driver blade on the screw head, causes it to simply slip off the chamfered rear face, ...making it extremely difficult to remove the screw once installed.
These low cost security screws are the original type of One-way Security Screw, which has been proven over many years.
These screws are available from stock - in a choice of; Woodscrews, Self Tapping Screws and Metric Machine Screws.
The Twin Thread Woodscrews are manufactured from Bright Zinc Plated hardened steel, the Self Tapping screws and the Metric Machine Screws are manufactured from Stainless Steel.
…for more information visit the website; insight-security.com
…or call one of the insight specialists, t: +44 (0)1273 475500, where you’ll speak to a real person with a wealth of expertise and knowledge to draw on.
