Install This One Upgrade and Print in Peace – 8dB Quieter @3DPrintscape
Install This One Upgrade and Print in Peace – 8dB Quieter  @3DPrintscape
Uploaded March 2021 | Updated November 2026, 3 days ago
If you have a silent mainboard, the printer's loudest component is the fan in the power supply. This can be fixed by upgrading to a silent fan. There is no audible difference when the silent fan is running, and it reduced the max decibel level produced by the printer by about 8db. If you want to be able to print without the noise impacting you or your family, this upgrade is a must-have. If you don’t have a silent mainboard, you should start there first.

If you have any questions on the content covered in this video, feel free to leave a comment below with them. I try to reply to all commented within 48 hours.

Chapters
0:00 Intro — Why the PSU Fan Is Now the Loudest Part
1:15 Baseline Noise Reading: 61 dB
1:45 Removing the Power Supply from the Printer
3:00 Disassembling the PSU Housing
5:00 Removing the Stock Fan
6:30 Test-Fitting the Printed Fan Cover
7:15 Mounting the 80mm Silent Fan
9:00 Wiring: Cutting & Stripping the Cables
11:30 Connecting to the Buck Converter
13:30 Gluing the Buck Converter in Place
14:30 Adjusting Buck Converter Voltage (⚠️ Open Components)
16:00 Reassembling & Remounting to the Printer
17:00 After Reading: 53 dB — 8 dB Reduction
17:30 Summary & Tips

Cura Profiles: 3dprintscape.com/cura-profiles
Written Instructions: 3dprintscape.com/3d-printer-power-supply-silent-fan-upgrade

Referenced Links
Recommended Hardware
Ender 3 Pro on Amazon: geni.us/vIAIx
HATCHBOX Filament on Amazon: geni.us/BJx0Gdj
Silent Fan 80mm on Amazon: geni.us/GRSLfL
Buck Converter on Amazon: geni.us/hJIb

STL Files
Ender 3 PSU Cover: thingiverse.com/thing:3437190
Ender 3 Pro PSU Cover: thingiverse.com/thing:3232346

Need Assistance?
Join us on Discord: discord.gg/Bu94EYVkrU
Please consider helping support the channel through Patreon so we can continue to develop new content. patreon.com/3dprintscape

Our Site
3dprintscape.com

*This channel is owned and operated by 3D Printscape. 3D Printscape is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.
Install This One Upgrade and Print in Peace – 8dB QuieterABS Printing Without an Enclosure: Big Mistake?Ender 3 Pro Cura Setup - Stop Making These MistakesUnboxing and Setting Up the Revopoint Inspire 3D Scanner: What to Expect and How to Get StartedDont Buy a Raspberry Pi Before Seeing This: BTT Pi v2 ReviewTwoTrees SK1 – Cura Setup and KlipperSonic Pad Firmware Installation – Everything You Need to KnowFix Ghosting and Layer Shift With This UpgradeFix SKR Mini E3 V3 Issues: Firmware UpdateThis New Cura Update Cuts Print Time in HalfCura 4.8 - New Features That Actually MatterCreality CR-Scan Ferret Pro – Setup & Initial Thoughts!
3D Printscape |

Install This One Upgrade and Print in Peace – 8dB Quieter

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER