Uploaded November 2023 | Updated November 2026, 8 hours ago
Setting up the Revopoint Inspire for the first time? This hands-on walkthrough covers the unboxing, Revo Scan calibration, first turntable scan, basic mesh cleanup, STL export, and the limits I found during my first few days with it.
Full setup guide, first-scan settings, and workflow:
3dprintscape.com/revopoint-inspire-3d-scanner-setup-initial-thoughts
Revopoint Inspire resources:
Disclosure: Some links below may be affiliate links. If you buy through them, 3DPrintscape may earn a commission at no extra cost to you.
- Revopoint Inspire Standard Edition — Check current availability: affiliate.geekbuying.com/deeplink.php?affid=4535&url=https://www.geekbuying.com/item/Revopoint-INSPIRE-3D-Scanner-Standard-Edition-522225.html
- Revopoint Inspire Standard Edition + Mobile Kit — Check current availability: affiliate.geekbuying.com/deeplink.php?affid=4535&url=https://www.geekbuying.com/item/Revopoint-INSPIRE-3D-Scanner-Standard-Edition-Mobile-Kit-522230.html
- Revo Scan software download: revopoint3d.com/download
Related guides:
- 3D Scanner Reviews & Workflows: 3dprintscape.com/guides/3d-scanners
- Revopoint POP 4 first look: 3dprintscape.com/revopoint-pop-4-review-unboxing-ai-segmentation
- AI to 3D Printing & 3D Scanning: 3dprintscape.com/guides/ai-3d-scanning
My regular 3D printing gear:
Disclosure: Some links below may be affiliate links. If you buy through them, 3DPrintscape may earn a commission at no extra cost to you.
- Creality SPARKX i7 — Direct: crealityofficialstore.sjv.io/qWB22y | Amazon: geni.us/T3G4ET
- Flashforge Creator 5 Pro — Direct: flashforge.sjv.io/5kq9v3 | Amazon: geni.us/lmvnCr
- Anycubic Kobra S1 Combo — Direct: tidd.ly/4xDswef | Amazon: geni.us/O1zqKvA
- Bambu Lab X2D — Amazon: geni.us/zzUSaEq
- More recommended gear: 3dprintscape.com/gear
Chapters:
00:00 Revopoint Inspire first look
02:03 Unboxing and kit contents
03:54 Scanner, stand, and rotating base setup
06:11 Install Revo Scan
07:06 First connection and calibration
08:09 First-scan settings
11:55 Capture extra coverage
14:01 Clean up the mesh
15:50 Export an STL and inspect it in Cura
18:46 Initial thoughts
22:00 Who the Inspire is for
Subscribe for practical 3D printing guides, reviews, and projects:
youtube.com/channel/UCUakh0dyF_l3b-W3x2DZplQ
━━━━━━━━━━━━━━━━━━━━━━
💬 CONNECT
━━━━━━━━━━━━━━━━━━━━━━
▸ Discord: discord.gg/Bu94EYVkrU
▸ Patreon: patreon.com/3dprintscape
▸ Website: 3dprintscape.com
Tags: #RevopointInspire #3DScanner #RevoScan #3DPrinting
Setting up the Revopoint Inspire for the first time? This hands-on walkthrough covers the unboxing, Revo Scan calibration, first turntable scan, basic mesh cleanup, STL export, and the limits I found during my first few days with it.
Full setup guide, first-scan settings, and workflow:
3dprintscape.com/revopoint-inspire-3d-scanner-setup-initial-thoughts
Revopoint Inspire resources:
Disclosure: Some links below may be affiliate links. If you buy through them, 3DPrintscape may earn a commission at no extra cost to you.
- Revopoint Inspire Standard Edition — Check current availability: affiliate.geekbuying.com/deeplink.php?affid=4535&url=https://www.geekbuying.com/item/Revopoint-INSPIRE-3D-Scanner-Standard-Edition-522225.html
- Revopoint Inspire Standard Edition + Mobile Kit — Check current availability: affiliate.geekbuying.com/deeplink.php?affid=4535&url=https://www.geekbuying.com/item/Revopoint-INSPIRE-3D-Scanner-Standard-Edition-Mobile-Kit-522230.html
- Revo Scan software download: revopoint3d.com/download
Related guides:
- 3D Scanner Reviews & Workflows: 3dprintscape.com/guides/3d-scanners
- Revopoint POP 4 first look: 3dprintscape.com/revopoint-pop-4-review-unboxing-ai-segmentation
- AI to 3D Printing & 3D Scanning: 3dprintscape.com/guides/ai-3d-scanning
My regular 3D printing gear:
Disclosure: Some links below may be affiliate links. If you buy through them, 3DPrintscape may earn a commission at no extra cost to you.
- Creality SPARKX i7 — Direct: crealityofficialstore.sjv.io/qWB22y | Amazon: geni.us/T3G4ET
- Flashforge Creator 5 Pro — Direct: flashforge.sjv.io/5kq9v3 | Amazon: geni.us/lmvnCr
- Anycubic Kobra S1 Combo — Direct: tidd.ly/4xDswef | Amazon: geni.us/O1zqKvA
- Bambu Lab X2D — Amazon: geni.us/zzUSaEq
- More recommended gear: 3dprintscape.com/gear
Chapters:
00:00 Revopoint Inspire first look
02:03 Unboxing and kit contents
03:54 Scanner, stand, and rotating base setup
06:11 Install Revo Scan
07:06 First connection and calibration
08:09 First-scan settings
11:55 Capture extra coverage
14:01 Clean up the mesh
15:50 Export an STL and inspect it in Cura
18:46 Initial thoughts
22:00 Who the Inspire is for
Subscribe for practical 3D printing guides, reviews, and projects:
youtube.com/channel/UCUakh0dyF_l3b-W3x2DZplQ
━━━━━━━━━━━━━━━━━━━━━━
💬 CONNECT
━━━━━━━━━━━━━━━━━━━━━━
▸ Discord: discord.gg/Bu94EYVkrU
▸ Patreon: patreon.com/3dprintscape
▸ Website: 3dprintscape.com
Tags: #RevopointInspire #3DScanner #RevoScan #3DPrinting










