Infusion Spray Adhesive for Vacuum Infusion | Low-VOC 1602-A @fibreglast
Infusion Spray Adhesive for Vacuum Infusion | Low-VOC 1602-A  @fibreglast
Uploaded December 2024 | Updated November 2026, 4 hours ago
LVOC Infusion Spray Adhesive (1602-A) holds fiberglass reinforcement in place for vacuum infusion while meeting the strictest VOC regulations. It is a specialty industrial spray adhesive designed specifically for the infusion molding process.

#InfusionSprayAdhesive #LowVOC #VacuumInfusion

WHY USE IT
1602-A is designed to adhere and hold reinforcing fiberglass materials, including mats, pads, and strips, in place before and during resin infusion. Because it is formulated for the infusion process, it will not interfere with the polymer matrix integrity and will cross-link with resins to create an integrated matrix.

HOW TO USE IT
For best results, make sure surfaces are dry and free from dirt, grease, or oil. Spray an even coat, allow for a brief tack, and apply pressure to the surface. The web spray pattern offers quick coverage.

KEY FEATURES
• Low VOCs and NO HAPS
• SCAQMD Rule 1168 and OTC compliant
• Specifically formulated for infusion vacuum molding
• Fast tack for securing reinforcing materials in the mold
• Compatible with polyester, vinyl ester, and epoxy resins
• Web spray pattern for quick coverage

WHO IT'S FOR
Composite fabricators and infusion molders who need to keep fiberglass mats, pads, and strips from shifting in the mold, especially shops working under low-VOC requirements such as SCAQMD Rule 1168. This video covers what the adhesive does, which resins it works with, and how to apply it.

CHAPTERS
0:00 LVOC Infusion Spray Adhesive Overview
0:23 Holds Fiberglass in Place Before and During Resin Infusion
0:40 Designed for the Infusion Molding Process
0:54 Low VOC, No HAPS, and Polyester, Vinyl Ester, Epoxy Compatibility
1:16 Fast Tack for Securing Reinforcement in the Mold
1:32 Surface Prep: Dry and Free of Dirt, Grease, or Oil
1:53 How to Apply: Spray an Even Coat, Tack, and Press
2:11 Web Spray Pattern for Quick Coverage

ORDER
1602-A LVOC Infusion Spray Adhesive: fibreglast.com/products/lvoc-infusion-spray-adhesive
Also available: 1602-B, case of 12 cans

Learn more about resin infusion in the Fibre Glast Learning Center: fibreglast.com/pages/learning-center
Shop all composite supplies: fibreglast.com
Same day shipping when ordered by 2:30pm ET
Infusion Spray Adhesive for Vacuum Infusion | Low-VOC 1602-A2806 Saertex 1200 g/m2 (36 oz/yd2) Stitched Biaxial (+/-45)Electric Supercar  PAI Boat Polishing Products#1153 FibreleaseInfusion Process for Helicopter Seat. Part five of five.Final Steps Before Vacuum Infusion for Helicopter Seat. Part four of five.Making a Perfect Mold for a Carbon Fiber Seat. Part two of five.492 Mat TapeFE 32 Fabrication - Part ThreePrepreg Unidirectional Carbon Fabric (4.3 oz)5/ Electric Z Project - Frunk Battery CoverSpray Guns & Equipment
Fibre Glast |

Infusion Spray Adhesive for Vacuum Infusion | Low-VOC 1602-A

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER