FE 32 Fabrication - Part Three @fibreglast
FE 32 Fabrication - Part Three  @fibreglast
Uploaded July 2023 | Updated November 2026, 3 hours ago
In part three of this four part series, Tim at Street Bandito continues surface coating the front end and explains important differences between working with fiberglass and carbon fiber.

Products in this series of videos include:

Hi Temp Epoxy Surface Coat
fibreglast.com/product/high-temp-epoxy-surface-coat-1096

Chavant Le Beau Clay
fibreglast.com/category/clay

Non-Silicone High Temp Paste Wax – mold release for high working temperatures.
fibreglast.com/product/non-silicone-high-temp-paste-wax-4121

System 3000 High Temp Epoxy Kit
fibreglast.com/product/high-temp-epoxy-resin-3000

PVA Release Film
fibreglast.com/product/PVA_Release_Film_13

Thanks to Street Bandito in association with Industry Garage.

youtube.com/@StreetBandito

Visit us at fibreglast.com
FE 32 Fabrication - Part ThreePrepreg Unidirectional Carbon Fabric (4.3 oz)5/ Electric Z Project - Frunk Battery CoverSpray Guns & EquipmentClay Products Overview - UpdatedWypAll X80 Paper WipesFibre Glast Carbon Fiber Kit Hood Project Part 1 of 5Polyethylene Vacuum Bagging FilmClay for Composites Workshop OverviewStyrene WaxUnboxing System 2000 Epoxy ResinSystem 2000 Epoxy Resin
Fibre Glast |

FE 32 Fabrication - Part Three

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER