Industrial Building Demolition and Progressive Collapse using Pulling Cables (FP7, INACHUS, PILOT 2) @KaiKostack

Industrial Building Demolition and Progressive Collapse using Pulling Cables (FP7, INACHUS, PILOT 2) @KaiKostack

Uploaded June 2017 | Updated September 2026, 2 days ago

This video shows the demolition of a factory building simulated with our Bullet Constraints Builder software for Blender. The structural model is generated automatically by the BCB software which is developed as part of the INACHUS research project.

The second INACHUS field test was held on 31 May 2017 in Lyon, France. It focused on merging data from wide area assessment tools and collapse simulations. In collaboration with CARDEM, a French demolition company, INACHUS partners identified a three-story factory building in Saint-Fons that was scheduled to be demolished. The first scenario planned was to weaken key pillars and subsequently pull the building over by ropes which is what we simulated here.

The INACHUS project is a European wide research project starting in 2015, that examines measures to improve first response after building collapse in catastrophic events like earthquakes, storms, explosions etc.

"INACHUS" stands for:
Technological & Methodological Solutions for Integrated Wide Area Situation Awareness & Survivor Localization to Support Search & Rescue Teams

Credits & Links:

INACHUS - H2020, InvestEUresearch, EU-funded research, science
http://www.inachus.eu

Laurea University of Applied Sciences LUAS, Finland
Kai Kostack, Oliver Walter, Seija Tiainen
inachuslaurea.files.wordpress.com

3D-Software: blender.org
Bullet Constraints Builder: github.com/KaiKostack/bullet-constraints-builder
Simulated with Fracture Modifier build for better performance: blenderartists.org/forum/showthread.php?343637-Custom-Build-Blender-Fracture-Modifier

Industrial Building Demolition and Progressive Collapse using Pulling Cables (FP7, INACHUS, PILOT 2)

Earthquake / Masonry Building Collapse Simulation - WIP | BCB | INACHUS

Kostack Studio 100,000 Subscribers Celebration Trailer 🥳

New Horizons All Images - Journey to Pluto

Smoke Simulations Big Scale (Blender 3D)

Building a Constraint Based Structure Automatically via the Constraint Builder addon (INACHUS)

WTC7 Simulation Evaluation - World Trade Center 7 Collapse Research Study

Dancing Polar Bear - Short Film on Climate Change

$Fractals in Blender (Cycles, Volumetrics) 3D renders of the famous Julia fractal based on the Mandelbrot set made with Blenders material shader nodes. I just finished playing the game P.O.L.L.E.N. and after the end sequence I somehow felt the urge to build a fractal in Blender, I have no explanation for that. ;) Since recursive node trees are not supported in Blender I just duplicated the same node over and over, one per iteration. Yet it was easy to build since similar named sockets are automatically connected just by tapping the F key. The volumetrics are rendered with Cycles. I tried that also with Eevee in Blender 2.8 but the shader tree is too heavy so that it locks Blender up, hence there is no real-time volumetrics Julia for now. Credits: Math - Verhulst, Mandelbrot, Julia Music - Tim Beek - Vanished (CC BY 4.0) http://kostackstudio.de$

WTC Simulation 2.0 Announcement [8K]

Railway & Train Destruction - Dicing Engine

$WTC Simulation 2025, Part 1 (South Tower) Final simulation results for the South Tower (the tower that collapsed first chronologically). High-resolution physics simulation with original audio synthesized from the simulation output. Part 2 will cover the North Tower. This is an independent technical reconstruction and not part of any official investigation. 01:15 NBC Woolworth Building Statcam 02:13 Floor Failures 03:10 Distant View from West 04:10 Cut Through Both Towers 05:06 Marriott WTC-3 Close 05:52 Real Cam: 2008 Anonymous Release 06:38 Aerial View from Above (Wide Shot) 07:38 Following the Top 08:14 View from North Tower onto South Tower 08:38 View from South Tower onto North Tower 08:56 Aerial View of Plaza 09:16 Plaza at Eye Level 09:40 Underground / Mall The simulation reconstructs the South Tower collapse after years of iterative development, verification and open-source tooling. Structural geometry was built from public imagery, plans and measurements where feasible and simplified when necessary to keep computation tractable. Core and perimeter columns, floor trusses, slabs and façade panels are represented as discrete components with explicit connections; steel is modelled with elastic–plastic behaviour, including limited strain-rate effects where practical. Connections are implemented with fixed constraints that evaluate each degree of freedom individually and can slip or rupture when thresholds are exceeded; spring-type constraints introduce an intermediate plastic phase that permits pre-failure yielding before final rupture. The collapse trigger is a localized weakening of elements around the impact region, implemented as a spatially decaying gradient that reduces element strength and stiffness with distance from the centre of impact. In addition, a small number of core columns that engineering judgment indicated had suffered total failure after the impact were removed from the model; these removals are few and, taken alone, would not have produced global collapse. Trusses and façade elements in the affected area were also weakened. After this prepared initial state no further manual removals, scripted impulses or ad-hoc forces were applied: the sequence unfolds under gravity, inertia, contact and material response. No soft-body dynamics were used; the solver is a rigid-body, constraint-based system with tuned contact resolution, time integration and collision handling to maintain stability at high event rates. Spring constraints emulate plastic deformation phases and the fracture model disconnects constraints or produces fragments when stress or energy criteria are exceeded, allowing progressive redistribution of loads and collapse propagation. Grouping and chunking strategies were used to limit memory pressure during long runs, and all key parameters and runs were logged. All simulation states were cached as vertex/centroid animations for playback, rendering and post-processing. The audio track was synthesized directly from these cached states by converting element-centroid motion into sound using a collision-grain rendering technique: impact peaks detected in grouped signals trigger short grains that combine pitched carriers mapped from spatial grouping with band-limited noise bursts for high-frequency detail. Grains are windowed, optionally filtered, spatialised with distance-dependent attenuation and stereo panning, temporally jittered to desynchronize low frame-rate sampling, and resampled to audio rate. The resulting soundscape is emergent from the physical simulation and not Foley or stock recordings. Multiple parametric runs explored sensitivity to the weakening gradient, material strength, connection properties, damping and the particular set of removed columns; selected outcomes were compared qualitatively with available imagery. The model contains simplifying assumptions: geometry, connection detail and constitutive laws are approximations, and thermal weakening is represented phenomenologically as a strength/stiffness gradient rather than via a fully coupled thermo-structural transient. The aim is to present a physically plausible collapse pathway under stated assumptions, not to claim a single definitive reconstruction. This release covers Part 1 (South Tower); a separate simulation of the North Tower will follow. The project is privately conducted without external funding or institutional backing. 3D software: Blender — https://www.blender.org Simulation: Bullet Constraints Builder — https://github.com/KaiKostack/bullet-constraints-builder Fracture Modifier (custom builds supported) — http://blenderartists.org/forum/showthread.php?343637-Custom-Build-Blender-Fracture-Modifier The sound pipeline adapts concepts from prior work in physically based contact and granular synthesis (O’Brien 2002; van den Doel et al. 2001; Roads/Xenakis/Truax; Raghuvanshi et al.) into a custom implementation that links structural collapse data directly to audio output.$

Kostack Studio |

Industrial Building Demolition and Progressive Collapse using Pulling Cables (FP7, INACHUS, PILOT 2)