Icom IC-9700 TX Mod for 2M and 70cm @waynephillips1848
Icom IC-9700 TX Mod for 2M and 70cm  @waynephillips1848
Uploaded January 2024 | Updated November 2026, 3 days ago
Icom IC-9700 TX mod for 2M and 70cm

This Mod will extend the frequecy from 146-148 MHz and 440-450 MHz (UK and European models only)

Please Note: I would recommend Only do this modification if you are competent with a soldering iron as you may damage the radio and void the warranty.
DO AT YOUR OWN RISK

Tools needed: Soldering iron, some form of magnification, screw driver to open the case bottom

Remove Diodes D332 and D326, access to the diodes can be done by removing the base cover plate of the IC-9700
Icom IC-9700 TX Mod for 2M and 70cmFix Sharp Aquos TV  Faulty, switchs off after LogoSharp VZ-2500E Boombox Dismantle Front casing, speaker and grill removalHonda XL500s 1980, 6v electrics, Fit indicators and flasher relayYaesu FT897 Faulty CAT LINEAR socket FC30 ATUZL7-2 2meter 7 Element Yagi on vector analyzer / analyser KVE520Marconi radio test set 2966A overviewR&S CMU200 hard disk backupHP 54540C Oscilloscope, Fault: SOFTWARE ERROR. Part 1Elecraft KX3 fitting KXAT3 internal ATUiOptron MiniTower Altitude Locking Knob DIY UpgradeFluke 196C ScopeMeter, Basic Probe Cal & Functions.
Waynes Share the Knowledge |

Icom IC-9700 TX Mod for 2M and 70cm

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER