Uploaded September 2026 | Updated November 2026, 6 days ago
3M says the new Cubitron 3 flap disc removes 49% more material than the Cubitron 2. We put both discs on our flap disc test machine, measured every inch, and the Cubitron 3 beat 3M's own claim. Here is the full data, plus the disc we still reach for on everyday work.
THE HONEST VERDICT: FASTEST IS NOT ALWAYS THE BEST BUY
The Cubitron 3 is the most aggressive flap disc we have tested. It is also about $8 a disc. Once you chart cost per inch of material removed and cost per minute of use, the STEEL SAVAGE is still the value champion: $24 for a box of 10, about $2.40 a disc, and one of the best material-removal-per-dollar ratios of anything on our chart.
Why a Steel Savage lives on the grinder in our shop:
- Fresh edge, more often. Almost all grinding happens on the outer half inch of the disc. When that edge burns off, a $2 disc gets pitched and a new one goes on. An $8 disc gets set aside with most of its abrasive still stranded in the middle.
- Cleaner blending. A fresh disc has full circumference and no radius worn into it, so it blends and flattens better.
- Nothing to baby. Rust, undercoating, paint, mystery steel. If it glazes, it is two bucks.
- Better control. The Cubitron 3 wants heavy pressure and can cut too deep. The Steel Savage likes lighter pressure, which is what you want for medium-duty grinding and finish work.
- Three fresh Steel Savage discs give you more usable cutting edge than one worn Cubitron 3.
WHICH FLAP DISC SHOULD YOU BUY?
- Grinding all day, heavy bevels, fast weld removal, price is not the concern: 3M Cubitron 3.
- Everyday shop, home, and hobby work, medium-duty grinding, blending, best value per dollar: Steel Savage.
- Most shops: both. One disc that hogs, and a stack of cheap discs you are not afraid to throw away.
SHOP ABRASIVES AT FIREBALL TOOL
Steel Savage flap discs (10 packs): fireballtool.com/products/savage-4-5-ceramic-flap-disc-40-grit-10-pack?variant=44145640996908
3M Cubitron 3 flap discs (5 and 10 packs): fireballtool.com/products/3m%E2%84%A2-cubitron%E2%84%A2-3-flap-disc-4-1-2-in-x-7-8-in-t27-1169f-10-pack-1?variant=46082275147820
Flap disc sample pack, try them side by side: fireballtool.com/products/combo-disc-pack?variant=44160804519980
All abrasives: fireballtool.com
We only stock discs that earn it on the test machine, and we buy in smaller quantities so we can keep the price down. Every abrasive order funds more testing like this.
HOW WE TEST FLAP DISCS
Our machine drops a 12-inch steel coupon onto a spinning flap disc and lets gravity apply the load. We run 20-minute tests at 4 pounds and 8 pounds, at high and low grinder speed, cold and with added heat, and we log material removed minute by minute. Tests end early if the disc glazes, stops cutting, or disintegrates. Then we compare every disc on total material removed, grinding time, cost per inch removed, and cost per minute of use. We have tested over 50 discs, 39 of them on this machine.
FREQUENTLY ASKED QUESTIONS
Is the 3M Cubitron 3 better than the Cubitron 2?
Yes. It removed more material in every condition we tested, cold and hot, at 4 pounds and 8 pounds, at both grinder speeds.
Does the Cubitron 3 really remove 49% more material?
In our testing it exceeded that claim. At 4 pounds cold it removed 41 inches against 19 inches for the Cubitron 2.
Which flap disc removes the most material?
The 3M Cubitron 3, by a wide margin, at about 47.5 inches average across our tests.
What is the best value flap disc?
The Steel Savage. At roughly $2.40 a disc it has one of the best cost-per-inch-of-material-removed ratios we have measured.
Is the Cubitron 3 worth the money?
For production grinding and fast material removal, yes. For everyday medium-duty work, a fresh cheap disc like the Steel Savage is usually the smarter spend.
Can a flap disc be too aggressive?
Yes. In the first minute of grinding the Cubitron 3 cuts about twice as fast as a Steel Savage, and it is easy to cut deeper than you intended.
#flapdisc #Cubitron3 #fireballtool
flap disc test, 3M Cubitron 3 review, Cubitron 3 vs Cubitron 2, best flap disc, Steel Savage flap disc, angle grinder discs, cheap flap disc vs expensive, material removal test, weld grinding, beveling steel, abrasives review, welding and fabrication, metalworking tools
3M says the new Cubitron 3 flap disc removes 49% more material than the Cubitron 2. We put both discs on our flap disc test machine, measured every inch, and the Cubitron 3 beat 3M's own claim. Here is the full data, plus the disc we still reach for on everyday work.
THE HONEST VERDICT: FASTEST IS NOT ALWAYS THE BEST BUY
The Cubitron 3 is the most aggressive flap disc we have tested. It is also about $8 a disc. Once you chart cost per inch of material removed and cost per minute of use, the STEEL SAVAGE is still the value champion: $24 for a box of 10, about $2.40 a disc, and one of the best material-removal-per-dollar ratios of anything on our chart.
Why a Steel Savage lives on the grinder in our shop:
- Fresh edge, more often. Almost all grinding happens on the outer half inch of the disc. When that edge burns off, a $2 disc gets pitched and a new one goes on. An $8 disc gets set aside with most of its abrasive still stranded in the middle.
- Cleaner blending. A fresh disc has full circumference and no radius worn into it, so it blends and flattens better.
- Nothing to baby. Rust, undercoating, paint, mystery steel. If it glazes, it is two bucks.
- Better control. The Cubitron 3 wants heavy pressure and can cut too deep. The Steel Savage likes lighter pressure, which is what you want for medium-duty grinding and finish work.
- Three fresh Steel Savage discs give you more usable cutting edge than one worn Cubitron 3.
WHICH FLAP DISC SHOULD YOU BUY?
- Grinding all day, heavy bevels, fast weld removal, price is not the concern: 3M Cubitron 3.
- Everyday shop, home, and hobby work, medium-duty grinding, blending, best value per dollar: Steel Savage.
- Most shops: both. One disc that hogs, and a stack of cheap discs you are not afraid to throw away.
SHOP ABRASIVES AT FIREBALL TOOL
Steel Savage flap discs (10 packs): fireballtool.com/products/savage-4-5-ceramic-flap-disc-40-grit-10-pack?variant=44145640996908
3M Cubitron 3 flap discs (5 and 10 packs): fireballtool.com/products/3m%E2%84%A2-cubitron%E2%84%A2-3-flap-disc-4-1-2-in-x-7-8-in-t27-1169f-10-pack-1?variant=46082275147820
Flap disc sample pack, try them side by side: fireballtool.com/products/combo-disc-pack?variant=44160804519980
All abrasives: fireballtool.com
We only stock discs that earn it on the test machine, and we buy in smaller quantities so we can keep the price down. Every abrasive order funds more testing like this.
HOW WE TEST FLAP DISCS
Our machine drops a 12-inch steel coupon onto a spinning flap disc and lets gravity apply the load. We run 20-minute tests at 4 pounds and 8 pounds, at high and low grinder speed, cold and with added heat, and we log material removed minute by minute. Tests end early if the disc glazes, stops cutting, or disintegrates. Then we compare every disc on total material removed, grinding time, cost per inch removed, and cost per minute of use. We have tested over 50 discs, 39 of them on this machine.
FREQUENTLY ASKED QUESTIONS
Is the 3M Cubitron 3 better than the Cubitron 2?
Yes. It removed more material in every condition we tested, cold and hot, at 4 pounds and 8 pounds, at both grinder speeds.
Does the Cubitron 3 really remove 49% more material?
In our testing it exceeded that claim. At 4 pounds cold it removed 41 inches against 19 inches for the Cubitron 2.
Which flap disc removes the most material?
The 3M Cubitron 3, by a wide margin, at about 47.5 inches average across our tests.
What is the best value flap disc?
The Steel Savage. At roughly $2.40 a disc it has one of the best cost-per-inch-of-material-removed ratios we have measured.
Is the Cubitron 3 worth the money?
For production grinding and fast material removal, yes. For everyday medium-duty work, a fresh cheap disc like the Steel Savage is usually the smarter spend.
Can a flap disc be too aggressive?
Yes. In the first minute of grinding the Cubitron 3 cuts about twice as fast as a Steel Savage, and it is easy to cut deeper than you intended.
#flapdisc #Cubitron3 #fireballtool
flap disc test, 3M Cubitron 3 review, Cubitron 3 vs Cubitron 2, best flap disc, Steel Savage flap disc, angle grinder discs, cheap flap disc vs expensive, material removal test, weld grinding, beveling steel, abrasives review, welding and fabrication, metalworking tools










