I Found the Problem! This Tacoma’s Exhaust Was PLUGGED SOLID! @BrandonLund
I Found the Problem! This Tacoma’s Exhaust Was PLUGGED SOLID!  @BrandonLund
Uploaded September 2026 | Updated November 2026, 3 hours ago
This 2001 Toyota Tacoma has been fighting me for days—and I finally found the problem!

In this video, I modify and weld my winch so I can safely get the Tacoma up on ramps and get underneath it. Then, I build a block off plate for the exhaust and try using shop air to clear what I thought might be an exhaust restriction.

That didn't work.

After some more testing, I finally discovered that the exhaust was plugged SOLID. So I cut the old exhaust off, installed a new exhaust system, fired the Tacoma up, and took it out for a rip!

After sitting since 2022, this old 2.4L Tacoma is finally back on the road. There were definitely a few surprises along the way, but seeing it actually run and drive made all the troubleshooting worth it.

🔧 2001 Toyota Tacoma
🔧 2.4L 4-cylinder
🔧 Diagnosing a no-start
🔧 Completely plugged exhaust
🔧 Custom winch modification
🔧 Exhaust replacement
🔧 First drive after sitting for years

If you enjoy old Toyota rescues, hands-on diagnostics, fabrication, repairs, and bringing neglected vehicles back to life, make sure to subscribe and follow along with the Tacoma project!

A Special Dedication

This Tacoma belonged to my aunt and uncle and was given to me after my uncle passed away. It means more to me than just an old pickup, it’s a piece of our family history.

I’m grateful to have the opportunity to bring it back to life, enjoy it, and make new memories with it. My hope is that someday I can pass this truck along to my grandson, so he can enjoy it as much as I have and, hopefully, carry forward the family values, memories, and stories that come with it.

RIP Uncle Bob.
This one’s for you. ❤️

0:00 Troubleshooting a stubborn non-starting truck
0:54 Fabricating a custom winch mount adapter
3:48 Testing the winch recovery system
5:08 Exhausting all diagnostic possibilities
8:50 Discovering the hidden exhaust blockage
16:57 Replacing the exhaust and final test drive

#ToyotaTacoma #Tacoma #2001Tacoma #Toyota #TruckRepair #CarRepair #Exhaust #ProjectTruck #DIYAutoRepair
I Found the Problem! This Tacoma’s Exhaust Was PLUGGED SOLID!Getting a Broken Tool Un-Stuck #tools #weldingMIG Welding Job Repairing a Broken Blade Assembly on a Commercial MowerShop Organization DIY Building the Ultimate Welding Clamp Storage RackStick and MIG Welding Repair Expanded Metal Trailer TailgateE11 How to Wire a Tandem Axle Trailer the RIGHT WAY | Avoid Rework & Save Time!E12 $750 Tandem Trailer Rebuild: Final Reveal! Rust Fix + New DeckMaximize Your Workshop Space with this DIY Welder and Plasma Cutter RackHow to Fabricate a Heavy-Duty Lawn Tractor Trailer Hitch Attachment – Simple DIY Tutorial!E5 Watch How We Rebuilt a $750 Tandem Axle Trailer Ramp Gate | Step-by-Step DIY GuideThe North East Got Clobbered Rain and Wind #maine #central maine #brandonlund #weldingSnagged This Broken Vise CHEAP — Then Welded It
Brandon Lund |

I Found the Problem! This Tacoma’s Exhaust Was PLUGGED SOLID!

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER