Uploaded May 2025 | Updated November 2026, 2 hours ago
Welcome to Episode 12, the final chapter of the $750 tandem axle trailer rebuild! In this episode, I take on the last steps: treating the rust, laying down a fresh new deck, and showing the full transformation from start to finish.
This trailer started as a beat up neglected mess, but after a lot of work (and staying under budget), it's finally road-ready and built to last.
🔩 In this final episode:
Rust removal and protection
Deck board installation
Full walkaround and final reveal
If you've followed the series, thank you! If you're just finding this now, check out the full playlist and see how we brought this trailer back to life.
📺 Full Build Series Playlist: youtube.com/watch?v=pG1XemyPe5c&list=PLfbf78fMz9Vo5uSKgZAz27WJAAPrcsMIX
👍 Like, comment, and subscribe for more DIY welding, fabrication, and rebuild content!
📢 Gear I Use:
✅ Optrel Helix Welding Helmet: optrel.us/product/helix-pure-air-clt/?srsltid=AfmBOopztvmrEvbiAucbqlLVFcze089z-ZuNB8G9j1WYc0BR8H99SHiw
✅ Optrel PAPR optrel.us/product/e3000x-papr
✅ Use code LUND30 at checkout and save 30% at OPTREL optrel.us
🎥 POPULAR VIDEOS HERE:
youtube.com/@BrandonLund/videos?view=0&sort=p&shelf_id=4
🎥 LEARN TO WELD AND FABRICATION VIDEOS HERE:
youtube.com/playlist?list=PLfbf78fMz9VqxPZTT-xmwdcrHVa7ML-ft
👕 MERCH brandonlund.myspreadshop.com
🔥 EVOLUTION TOOLS - SAVE AT CHECKOUT Use Coupon BLUND5
aspireiq.go2cloud.org/aff_c?offer_id=5959&aff_id=16060
UK BUYERS can also use promocode BLUND5
🔥 FRONIUS WELDERS - Save big when you purchase Fronius Welders using the
exclusive links below.
Fronius Welder Buy online bit.ly/2X5Q4tF
🔥 YesWelder Coupon yeswelder.com/?ref=BRANDONLUND
Use Coupon Code: yeswelder.com/discount/BRANDONLUND
🔥 Arccaptain Welders Coupon arccaptain.com/?ref=Brandon
Save 5% at checkout - COUPON CODE Lund23
🔥 Welding Coupons weldmetalsonline.com/?ref=BRANDONLUND
weldmetalsonline.com/discount/BRANDONLUND?ref=BRANDONLUND
More of the Tools and Gear I Use
🔴 amazon.com/shop/brandonlund
Evolution Mag Drill amzn.to/3s0mnbI USE BLUND5 at checkout to save $
Evolution Heavy Duty 15" Metal Cutting Saw amzn.to/34gA9yD Use BLUND5
Evolution Rage5s 10" multi-material Table Saw amzn.to/3ol3eAb
Center Punch amzn.to/33994ua
Metal Scribe amzn.to/3idI4y6
Relton Option 1 Cutting Fluid amzn.to/3cM3vFh
Chipping Hammer (the best): amzn.to/2zs3Lqg
APlus Lift Pneumatic Lift Table amzn.to/30cTaiu
Welding Clamps amzn.to/33KyayS
Stick Welding Gloves: amzn.to/2L1fxOX
MIG Pliers: amzn.to/2MJ1jnQ
Metal Marker: amzn.to/2MJzImj
Respirator (fits under my hood) amzn.to/2Hss3Vk
Drill America Drill Bits: amzn.to/2RjXk2i
Metal Thickness Gage amzn.to/32Dtn2O
Transfer Punches amzn.to/32MmpH9
Any commission earned from the above affiliate links goes directly towards helping to support the channel.
FOLLOW ME (for behind the scenes stuff)!
⇨ Instagram: instagram.com/lunddiybuilds
⇨ Facebook: facebook.com/LundDIYBuilds
⇨ Twitter: twitter.com/LundDIYBuilds
For Business Inquiries: LundDIYBuilds@gmail.com
Disclaimer: These videos are intended for entertainment purposes only and as such, you should not attempt to do any of the things you see me doing. Always read and follow the manufacturer’s safety guidelines before handling tools. Seek professional advice and training before using any tools or equipment. Never operate any tool without wearing the proper personal protective equipment. Final warning, Do not attempt to do any of the things you see me doing!
Welcome to Episode 12, the final chapter of the $750 tandem axle trailer rebuild! In this episode, I take on the last steps: treating the rust, laying down a fresh new deck, and showing the full transformation from start to finish.
This trailer started as a beat up neglected mess, but after a lot of work (and staying under budget), it's finally road-ready and built to last.
🔩 In this final episode:
Rust removal and protection
Deck board installation
Full walkaround and final reveal
If you've followed the series, thank you! If you're just finding this now, check out the full playlist and see how we brought this trailer back to life.
📺 Full Build Series Playlist: youtube.com/watch?v=pG1XemyPe5c&list=PLfbf78fMz9Vo5uSKgZAz27WJAAPrcsMIX
👍 Like, comment, and subscribe for more DIY welding, fabrication, and rebuild content!
📢 Gear I Use:
✅ Optrel Helix Welding Helmet: optrel.us/product/helix-pure-air-clt/?srsltid=AfmBOopztvmrEvbiAucbqlLVFcze089z-ZuNB8G9j1WYc0BR8H99SHiw
✅ Optrel PAPR optrel.us/product/e3000x-papr
✅ Use code LUND30 at checkout and save 30% at OPTREL optrel.us
🎥 POPULAR VIDEOS HERE:
youtube.com/@BrandonLund/videos?view=0&sort=p&shelf_id=4
🎥 LEARN TO WELD AND FABRICATION VIDEOS HERE:
youtube.com/playlist?list=PLfbf78fMz9VqxPZTT-xmwdcrHVa7ML-ft
👕 MERCH brandonlund.myspreadshop.com
🔥 EVOLUTION TOOLS - SAVE AT CHECKOUT Use Coupon BLUND5
aspireiq.go2cloud.org/aff_c?offer_id=5959&aff_id=16060
UK BUYERS can also use promocode BLUND5
🔥 FRONIUS WELDERS - Save big when you purchase Fronius Welders using the
exclusive links below.
Fronius Welder Buy online bit.ly/2X5Q4tF
🔥 YesWelder Coupon yeswelder.com/?ref=BRANDONLUND
Use Coupon Code: yeswelder.com/discount/BRANDONLUND
🔥 Arccaptain Welders Coupon arccaptain.com/?ref=Brandon
Save 5% at checkout - COUPON CODE Lund23
🔥 Welding Coupons weldmetalsonline.com/?ref=BRANDONLUND
weldmetalsonline.com/discount/BRANDONLUND?ref=BRANDONLUND
More of the Tools and Gear I Use
🔴 amazon.com/shop/brandonlund
Evolution Mag Drill amzn.to/3s0mnbI USE BLUND5 at checkout to save $
Evolution Heavy Duty 15" Metal Cutting Saw amzn.to/34gA9yD Use BLUND5
Evolution Rage5s 10" multi-material Table Saw amzn.to/3ol3eAb
Center Punch amzn.to/33994ua
Metal Scribe amzn.to/3idI4y6
Relton Option 1 Cutting Fluid amzn.to/3cM3vFh
Chipping Hammer (the best): amzn.to/2zs3Lqg
APlus Lift Pneumatic Lift Table amzn.to/30cTaiu
Welding Clamps amzn.to/33KyayS
Stick Welding Gloves: amzn.to/2L1fxOX
MIG Pliers: amzn.to/2MJ1jnQ
Metal Marker: amzn.to/2MJzImj
Respirator (fits under my hood) amzn.to/2Hss3Vk
Drill America Drill Bits: amzn.to/2RjXk2i
Metal Thickness Gage amzn.to/32Dtn2O
Transfer Punches amzn.to/32MmpH9
Any commission earned from the above affiliate links goes directly towards helping to support the channel.
FOLLOW ME (for behind the scenes stuff)!
⇨ Instagram: instagram.com/lunddiybuilds
⇨ Facebook: facebook.com/LundDIYBuilds
⇨ Twitter: twitter.com/LundDIYBuilds
For Business Inquiries: LundDIYBuilds@gmail.com
Disclaimer: These videos are intended for entertainment purposes only and as such, you should not attempt to do any of the things you see me doing. Always read and follow the manufacturer’s safety guidelines before handling tools. Seek professional advice and training before using any tools or equipment. Never operate any tool without wearing the proper personal protective equipment. Final warning, Do not attempt to do any of the things you see me doing!










