Uploaded October 2026 | Updated November 2026, 56 minutes ago
This is a tool that every radio guys needs in their tool kit.
Klein Tools packed 11 drive ends into a single ratcheting handle with the KNECT 11-in-1 Ratcheting Impact Rated Screwdriver/Nut Driver (model 32500HDRT). In this short review, I walk through every tool included, show how the bits and nut drivers swap in and out, and share whether this multi-bit screwdriver earns a spot in the ham shack, the go kit, or the field bag.
What's included in the Klein 11-in-1:Phillips bits in #1 and #2, slotted bits in 3/16" and 1/4", square (Robertson) bits in #1 and #2, and a T25 Torx bit. On the nut driver side, you get 1/4", 5/16", and 3/8" power nut drivers plus a standard 1/2" nut driver. That covers the fasteners you'll most often see on radio mounts, antenna hardware, power stations, enclosures, and general shack projects.
Key features:The ratcheting handle has a collar with three settings: forward, fixed, and reverse. That makes driving screws in tight spaces much faster than a standard screwdriver. Every component is impact rated, and the power nut drivers have a 1/4" quick-connect hex, so you can move them from the hand driver straight into an impact driver when you need more torque. The Cushion-Grip handle is comfortable for longer jobs. The bit tips are precision machined to cut down on cam-out. The whole tool is about 8 inches long and weighs 10.8 ounces.
Things to know before you buy:The bits are held in by a ball detent and are not magnetic, so a dropped screw won't stay on the tip. The handle is not insulated and should not be used on live electrical circuits. Keep both in mind if you're doing electrical or tower work.
If you're building an EmComm go kit, a POTA or SOTA field kit, or just want one ratcheting screwdriver that handles most jobs around the shack, the Klein KNECT 11-in-1 deserves a look.
Have you used a Klein multi-bit driver in your kit? Let me know in the comments which screwdriver you trust in the field.
🔹My Favorite Gear - amazon.com/shop/km4ack
🔹Links mentioned in the video
Klein Driver - https://link.amazon/B0d6OQf7g
🔹Weekly Newsletter - https://mailchi.mp/40da1fe472e3/km4acknewsletter
🔹Follow Me
Twitter @km4ack
🔹Cool Ham Gear - km4ack.com
🔹Support the channel through Patreon - patreon.com/km4ack
🔹🔹🔹🔹🔹
As an Amazon Associate I earn from qualifying purchases
This is a tool that every radio guys needs in their tool kit.
Klein Tools packed 11 drive ends into a single ratcheting handle with the KNECT 11-in-1 Ratcheting Impact Rated Screwdriver/Nut Driver (model 32500HDRT). In this short review, I walk through every tool included, show how the bits and nut drivers swap in and out, and share whether this multi-bit screwdriver earns a spot in the ham shack, the go kit, or the field bag.
What's included in the Klein 11-in-1:Phillips bits in #1 and #2, slotted bits in 3/16" and 1/4", square (Robertson) bits in #1 and #2, and a T25 Torx bit. On the nut driver side, you get 1/4", 5/16", and 3/8" power nut drivers plus a standard 1/2" nut driver. That covers the fasteners you'll most often see on radio mounts, antenna hardware, power stations, enclosures, and general shack projects.
Key features:The ratcheting handle has a collar with three settings: forward, fixed, and reverse. That makes driving screws in tight spaces much faster than a standard screwdriver. Every component is impact rated, and the power nut drivers have a 1/4" quick-connect hex, so you can move them from the hand driver straight into an impact driver when you need more torque. The Cushion-Grip handle is comfortable for longer jobs. The bit tips are precision machined to cut down on cam-out. The whole tool is about 8 inches long and weighs 10.8 ounces.
Things to know before you buy:The bits are held in by a ball detent and are not magnetic, so a dropped screw won't stay on the tip. The handle is not insulated and should not be used on live electrical circuits. Keep both in mind if you're doing electrical or tower work.
If you're building an EmComm go kit, a POTA or SOTA field kit, or just want one ratcheting screwdriver that handles most jobs around the shack, the Klein KNECT 11-in-1 deserves a look.
Have you used a Klein multi-bit driver in your kit? Let me know in the comments which screwdriver you trust in the field.
🔹My Favorite Gear - amazon.com/shop/km4ack
🔹Links mentioned in the video
Klein Driver - https://link.amazon/B0d6OQf7g
🔹Weekly Newsletter - https://mailchi.mp/40da1fe472e3/km4acknewsletter
🔹Follow Me
Twitter @km4ack
🔹Cool Ham Gear - km4ack.com
🔹Support the channel through Patreon - patreon.com/km4ack
🔹🔹🔹🔹🔹
As an Amazon Associate I earn from qualifying purchases










